- 09 11月, 2021 16 次提交
-
-
由 Tom Rini 提交于
This has not been supported by toolchains for some time and has been putting out a warning. Drop this. Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NThomas Huth <thuth@redhat.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Kuldeep Singh 提交于
Remove "num-cs" property from device-tree as it is no longer used by qspi driver anymore. Also, specify status as "disabled" and enable qspi support in respective board dts files. This will also help in aligning node properties with other board properties. Signed-off-by: NKuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
Document the update image and how to use the EFI UpdateCapsule. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Frieder Schrempf 提交于
In order to add other Kontron boards to the docs alongside the existing sl28 board, we need to reduce the levels of the sections and change the title. Cc: Fabio Estevam <festevam@gmail.com> Signed-off-by: NFrieder Schrempf <frieder.schrempf@kontron.de> Acked-by: NMichael Walle <michael@walle.cc> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
Enable support for update over EFI UpdateCapsule mechanism. This board doesn't support setting EFI variables after ExitBootservices(). Therefore, we are also enabling EFI_IGNORE_OSINDICATIONS. Signed-off-by: NMichael Walle <michael@walle.cc> [Rebased] Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
Generate a FIT update image during build. The image will be called "u-boot.update" and can be used to build an EFI UpdateCapsule or during DFU mode. Although, the latter isn't supported because there is no USB OTG driver yet. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
Allow EFI to actually set the time before ExitBootServices(). Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Wasim Khan 提交于
Increase fdt blob size for lx2160 and lx2162 series to fix below errors/warnings during device tree fixup. Unable to update property /soc/spi@2100000:status, err=FDT_ERR_NOSPACE Unable to update property /soc/spi@2110000:status, err=FDT_ERR_NOSPACE Unable to update property /soc/spi@2120000:status, err=FDT_ERR_NOSPACE WARNING: could not set reg FDT_ERR_NOSPACE. WARNING unable to set iommus: FDT_ERR_NOSPACE Signed-off-by: NWasim Khan <wasim.khan@nxp.com> Reviewed-by: NTom Rini <trini@konsulko.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Kshitiz Varshney 提交于
Remove Double free issue from calc_img_key_hash() and calc_esbchdr_esbc_hash() function. Verified the secure boot changes using lx2162aqds board. Signed-off-by: NKshitiz Varshney <kshitiz.varshney@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Kuldeep Singh 提交于
LX2162A-QDS has micron mt35xu512aba flash which requires flag CONFIG_SPI_FLASH_MT35XU on to probe flash successfully. Signed-off-by: NKuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: NWasim Khan <wasim.khan@nxp.com> Tested-by: NWasim Khan <wasim.khan@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Alban Bedel 提交于
Disabling PCIE support currently lead to a crash because the code for erratum A010315 is still run. Add a conditional to only select CONFIG_SYS_FSL_ERRATUM_A010315 when CONFIG_PCIE_LAYERSCAPE is enabled. Signed-off-by: NAlban Bedel <alban.bedel@aerq.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Meenakshi Aggarwal 提交于
Rename emmc_bootcmd environment variable to sd2_bootcmd to fix emmc boot on lx2162aqds board. Signed-off-by: NMeenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Priyanka Singh 提交于
Set popts->cpo_sample to 0x54 in t104xrdb/ddr.c to optimize cpo Signed-off-by: NPriyanka Singh <priyanka.singh@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Priyanka Singh 提交于
Fix Bad Shift operator issue in step_to_string function by adding an if check Signed-off-by: NPriyanka Singh <priyanka.singh@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Priyanka Singh 提交于
Fix possible divide by zero issue in fsl_ddr_set_memctl_regs by adding an if check Signed-off-by: NPriyanka Singh <priyanka.singh@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Priyanka Singh 提交于
Fix possible divide by zero issue in get_memory_clk_period_ps by adding a check Signed-off-by: NPriyanka Singh <priyanka.singh@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
- 08 11月, 2021 18 次提交
-
-
https://source.denx.de/u-boot/custodians/u-boot-efi由 Tom Rini 提交于
Pull request for efi-2022-01-rc2 Documentation: * improve description of mmc rescan * remove obsolete PPC documenation UEFI * Provide unit test for the EFI_TCG2_PROTOCOL * Implement add EFI_TCG2_PROTOCOL.SubmitCommand * Start the implementation of a 64 bit EFI app * Reduce rcar3_salvator-x image size
-
由 Heinrich Schuchardt 提交于
Currently output of dfu commands ends on a line with leading hash signs ('#'). The succeeding output should be placed on a new line. After writing updates via dfu print a new line. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NHeinrich Schuchardt <heinrich.schuchardt@canonical.com>
-
由 Heinrich Schuchardt 提交于
rcar3_salvator-x u-boot.img is very close to the 0x100000 size limit. Disable support for Unicode capitalization. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Masahisa Kojima 提交于
This commit adds the missing EFI_TCG2_PROTOCOL selftest and Measured Boot selftest in lib/efi_selftest. This selftest includes PE/COFF image measurement test, some PCR values are different in each architecture. With that, this commit also adds pre-built versions of lib/efi_selftest/efi_miniapp_file_image_exit.c for PE/COFF image measurement test for 32-bit arm, arm64, ia32, x86_64, riscv32 and riscv64. Prebuilding avoids the problem of reproducible builds. Signed-off-by: NMasahisa Kojima <masahisa.kojima@linaro.org> Make the test 'onrequest'. Add code comments to the includes with the binaries. Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Simon Glass 提交于
The current EFI video driver only works when running in the stub. In that case the stub calls boot services (before jumping to U-Boot proper) and copies the graphics info over to the efi table. This is necessary because the stub exits boot services before jumping to U-Boot. The app maintains access to boot services throughout its life, so does not need to do this. Update the driver to support calling boot services directly. Enable video output for the app. Note that this uses the EFI_GRAPHICS_OUTPUT_PROTOCOL protocol, even though it mentions vesa. A sample qemu command-line for this case is: qemu-system-x86_64 -bios /usr/share/edk2.git/ovmf-ia32/OVMF-pure-efi.fd -drive id=disk,file=try.img,if=none,format=raw -nic none -device ahci,id=ahci -device ide-hd,drive=disk,bus=ahci.0 Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Simon Glass 提交于
Add a function to return this information along with a stub for the efi_info_get() function, since calling it otherwise hangs U-Boot. Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Simon Glass 提交于
This variable is already defined by the EFI code. Drop the duplicate definition when building a 64-bit EFI app. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Simon Glass 提交于
Most modern platforms use 64-bit EFI so it is useful to have a U-Boot app that runs under that. Add a (non-functional) build for this. Note that --whole-archive causes the gcc 9.2 linker to crash, so disable this for now. Once this is resolved, things should work. For now, avoid mentioning the documentation for the 64-bit app, since it does not work. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Simon Glass 提交于
Most EFI implementations use 64-bit but U-Boot only supports running as a 32-bit app at present. While efi-x86_payload64 does boot from 64-bit UEFI it immediately changes back to 32-bit before starting U-Boot. In order to support a 64-bit U-Boot app, update the Kconfig to add an option for 32/64 bit. Update the prompt for the existing option so it is clear it relates to the stub. Move both up to just under the choice that controls them, since this looks better and the menu. Use CONFIG_EFI_APP in the Makefile instead of CONFIG_TARGET_EFI_APP, since the latter is specific to a single target and we will have two. Memory size is set to 32MB for now so that it can run on qemu without increasing the default memory size. We may need to increase the default later. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Simon Glass 提交于
For the EFI app, we must embed the devicetree in the ELF file since that is the only thing that is run by UEFI. Drop the warning to avoid confusion. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NHeinrich Schuchardt <heinrich.schuchardt@canonical.com>
-
由 Simon Glass 提交于
There is no need to avoid driver model for networking. Drop this. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Simon Glass 提交于
It is quite complicated to run U-Boot on QEMU since we have four different builds and they must use different versions of qemu and the UEFI binaries. Add a script to help. It requires U-Boot itself to be built. Once that is done you can use this script to build an image for use with qemu and optionally run it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Masahisa Kojima 提交于
This commit adds the EFI_TCG2_PROTOCOL.SubmitCommand required in the TCG PC Client PFP spec. SubmitCommand enables to send the raw command to the TPM device. To implement this api, tpm2_submit_command() is added into tpm-v2.c. Signed-off-by: NMasahisa Kojima <masahisa.kojima@linaro.org> Reviewed-by: NIlias Apalodimas <ilias.apalodimas@linaro.org>
-
由 Masahisa Kojima 提交于
Calling unaligned/access-ok.h version of put_unaligned_le64() causes data abort in arm 32-bit QEMU. The similar issue also occurs in linux kernel, unaligned/access-ok.h is no longer used in linux kernel[1]. This commit uses the unaligned/be_byteshift.h and unaligned/le_byteshift.h helper instead of unaligned/access-ok.h. [1]https://lore.kernel.org/all/20210507220813.365382-8-arnd@kernel.org/Signed-off-by: NMasahisa Kojima <masahisa.kojima@linaro.org> Reviewed-by: NIlias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: NHeinrich Schuchardt <heinrich.schuchardt@canonical.com>
-
由 AKASHI Takahiro 提交于
As we discussed in ML, currently a device tree is the only place to store public keys for capsule authentication. So __weak is not necessary for now. Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Heinrich Schuchardt 提交于
Provide human readable descriptions of the speed nodes instead of the name of constants from the code. Signed-off-by: NHeinrich Schuchardt <heinrich.schuchardt@canonical.com>
-
由 Thomas Huth 提交于
The related boards have been removed four years ago already, in commit 98f705c9 ("powerpc: remove 4xx support"), so this README file is not required anymore. Signed-off-by: NThomas Huth <thuth@redhat.com> Reviewed-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
The PPC440 support has been removed in commit 98f705c9 ("powerpc: remove 4xx support"). This patch removes this obsolete file as well. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Thomas Huth <thuth@redhat.com> Reviewed-by: NThomas Huth <thuth@redhat.com>
-
- 06 11月, 2021 1 次提交
-
-
由 Tom Rini 提交于
- An assortment of changes to finish migration of a number of symbols, and move YAFFS2 related options that we enable to Kconfig as well.
-
- 05 11月, 2021 5 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_BOARD_EARLY_INIT_F CONFIG_BOARD_LATE_INIT CONFIG_DISPLAY_BOARDINFO CONFIG_DISPLAY_BOARDINFO_LATE Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_SPL_DRIVERS_MISC CONFIG_SPL_ENV_SUPPORT CONFIG_SPL_GPIO CONFIG_SPL_I2C CONFIG_SPL_LDSCRIPT CONFIG_SPL_LIBCOMMON_SUPPORT CONFIG_SPL_LIBGENERIC_SUPPORT CONFIG_SPL_LOAD_FIT_ADDRESS CONFIG_SPL_MMC CONFIG_SPL_NAND_SUPPORT CONFIG_SPL_NO_CPU_SUPPORT CONFIG_SPL_OS_BOOT CONFIG_SPL_POWER CONFIG_SPL_STACK_R CONFIG_SPL_STACK_R_ADDR CONFIG_SPL_WATCHDOG CONFIG_SPL_TEXT_BASE Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_BMP_16BPP Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_OF_EMBED Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NRick Chen <rick@andestech.com>
-