- 04 8月, 2011 9 次提交
-
-
由 Shiraz Hashim 提交于
Signed-off-by: NShiraz Hashim <shiraz.hashim@st.com> Acked-by: NVipin Kumar <vipin.kumar@st.com>
-
由 Heiko Schocher 提交于
Signed-off-by: NHeiko Schocher <hs@denx.de> Acked-by: NDetlev Zundel <dzu@denx.de> cc: Albert Aribaud <albert.u.boot@aribaud.net> cc: <macpaul@gmail.com> cc: Wolfgang Denk <wd@denx.de>
-
由 Stefano Babic 提交于
Versatile board is used as example to run u-boot under qemu. The patch fixes relocation for all versatile boards and adds a versatileqemu target to be used under qemu. Patch tested only under qemu, not on real boards. Tested with QEMU emulator version 0.14.50. Signed-off-by: NStefano Babic <sbabic@denx.de> CC: Alessandro Rubini <rubini-list@gnudd.com> CC: Loïc Minier <loic.minier@linaro.org>
-
由 Thomas Abraham 提交于
Enable passing a flattened device tree to the kernel. Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
-
由 Chander Kashyap 提交于
Fixes dependency build error with "make O=" option. "make O=" option is used to specify output directory. Signed-off-by: NChander Kashyap <chander.kashyap@linaro.org>
-
由 Po-Yu Chuang 提交于
Signed-off-by: NPo-Yu Chuang <ratbert@faraday-tech.com>
-
由 Po-Yu Chuang 提交于
Signed-off-by: NPo-Yu Chuang <ratbert@faraday-tech.com>
-
由 Dirk Behme 提交于
Fix the compiler warning u8500_href.c: In function 'hrefplus_mmc_power_init': u8500_href.c:258: warning: implicit declaration of function 'prcmu_i2c_read' u8500_href.c:265: warning: implicit declaration of function 'prcmu_i2c_write' by adding the missing header file. Signed-off-by: NDirk Behme <dirk.behme@googlemail.com>
-
由 Christopher Harvey 提交于
Signed-off-by: NChristopher Harvey <charvey@matrox.com>
-
- 03 8月, 2011 31 次提交
-
-
由 Andreas Bießmann 提交于
The grasshopper board is a neat avr32 evaluation kit produced by In-Circuit GmbH. See http://www.ic-board.de/product_info.php?info=p75_ICnova-AP7000-Base.html for detailed information about this device. Signed-off-by: NAndreas Bießmann <biessmann@corscience.de> Signed-off-by: NReinhard Meyer <u-boot@emk-elektronik.de>
-
由 Reinhard Meyer 提交于
Signed-off-by: NReinhard Meyer <u-boot@emk-elektronik.de>
-
由 Reinhard Meyer 提交于
Signed-off-by: NReinhard Meyer <u-boot@emk-elektronik.de>
-
由 Xu, Hong 提交于
Rework for AT91SAM9263-EK, makes it build again. Based on the work for AT91SAM9260-EK. Signed-off-by: NHong Xu <hong.xu@atmel.com> Signed-off-by: NReinhard Meyer <uboot@emk-elektronik.de>
-
由 Xu, Hong 提交于
Rework for AT91SAM9263 SoC, makes it build again. Based on the work for AT91SAM9260-EK. Signed-off-by: NHong Xu <hong.xu@atmel.com> Signed-off-by: NReinhard Meyer <uboot@emk-elektronik.de>
-
由 Xu, Hong 提交于
Fix board part of AT91SAM9261-EK according to the new scheme Signed-off-by: NHong Xu <hong.xu@atmel.com> Signed-off-by: NReinhard Meyer <u-boot@emk-elektronik.de>
-
由 Xu, Hong 提交于
Fix at91sam9261_matrix.h according to the new scheme. Signed-off-by: NHong Xu <hong.xu@atmel.com>
-
由 Xu, Hong 提交于
Rework for AT91SAM9RL-EK, makes it build again. Based on the work for AT91SAM9260-EK. V4: added changes to MAKEALL Signed-off-by: NHong Xu <hong.xu@atmel.com> Signed-off-by: NReinhard Meyer <u-boot@emk-elektronik.de>
-
由 Xu, Hong 提交于
Rework for AT91SAM9RL SoC, makes it build again. Based on the work for AT91SAM9260-EK. V4: US->USART, cosmetics Signed-off-by: NHong Xu <hong.xu@atmel.com> Signed-off-by: NReinhard Meyer <u-boot@emk-elektronik.de>
-
由 Asen Dimov 提交于
Signed-off-by: NAsen Dimov <dimov@ronetix.at> Signed-off-by: NReinhard Meyer <u-boot@emk-elektronik.de>
-
由 Reinhard Meyer 提交于
Bits 0..3 in cs_mask = CS0..CS3 in SPI mode require it to be peripheral Bits 4..7 in cs_mask = CS0..CS3 in GPIO mode require it to be output Signed-off-by: NReinhard Meyer <u-boot@emk-elektronik.de>
-
由 Andreas Bießmann 提交于
The CONFIG_AT91RM9200_USART is an remnant of 18ed5e95 which deleted the at91rm9200_usart driver. Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Andreas Bießmann 提交于
Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Andreas Bießmann 提交于
All available at91rm9200 boards have migrated to ar920t/at91 and therefore to CONFIG_NET_MULTI. The obsolete at91rm9200_miiphy_initialize() was removed in "ARM: remove obsolete at91rm9200". Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Andreas Bießmann 提交于
Since all currently supported at91rm9200 boards are migrated to at91 support the joining notice can be removed. Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Andreas Bießmann 提交于
The CONFIG_AT91_LEGACY warning became obsolete due to complete removal of at91rm9200 arch code in arm920t. Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Andreas Bießmann 提交于
Since complete at91rm9200 SoC device was droped (due to replacement with common at91 code) this parameter can safely be removed. Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Andreas Bießmann 提交于
The big "ARM: remove broken boards" series deletes all boards using obsolete arm920t/at91rm9200 arch code. Therefore we can safely remove this code now. Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Aneesh V 提交于
Signed-off-by: NAneesh V <aneesh@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Aneesh V 提交于
TPS62361 is the new power supply used in OMAP4460 that supplies vdd_mpu. VCORE1 from Phoenix supplies vdd_core and VCORE2 supplies vdd_iva. VCORE3 is not used in OMAP4460. Signed-off-by: NAneesh V <aneesh@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Aneesh V 提交于
Signed-off-by: NAneesh V <aneesh@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Aneesh V 提交于
Signed-off-by: NAneesh V <aneesh@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Aneesh V 提交于
Signed-off-by: NAneesh V <aneesh@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 John Rigby 提交于
- Add mkimage support for OMAP boot image - Add support for OMAP boot image(MLO) generation in the new SPL framework Signed-off-by: NJohn Rigby <john.rigby@linaro.org> Signed-off-by: NAneesh V <aneesh@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Aneesh V 提交于
- Add MMC raw and FAT mode boot support for OMAP - Provide a means by which parameters passed by ROM-code can be saved in u-boot. - Save boot mode related information passed by OMAP4 ROM-code and use it to determine where to load the u-boot from - Assumes that the image has a mkimage header. Gets the payload size and load address from this header. If the header is not detected assume u-boot.bin as payload Signed-off-by: NAneesh V <aneesh@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Aneesh V 提交于
- Provide alternate implementations of board_init_f() board_init_r() for OMAP spl. - Provide linker script - Initialize global data - Add serial console support - Update CONFIG_SYS_TEXT_BASE to allow for SPL's bss and move it to board config header from config.mk Signed-off-by: NAneesh V <aneesh@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Aneesh V 提交于
- Allow SPL to have .bss disjoint from rest of the image - Allow for .bss setup in CONFIG_SPL_BUILD case too. - Take care of the special case where relocation offset = 0. - Compile out exception handling code and install a simpler vector Signed-off-by: NAneesh V <aneesh@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Aneesh V 提交于
Identify SDRAM devices connected to EMIF automatically: LPDDR2 devices have some Mode Registers that provide details about the device such as the type, density, bus width etc. EMIF has the capability to read these registers. If there are no devices connected to a given chip-select reading mode registers will return junk values. After reading as many such registers as possible and matching with expected ranges of values the driver can identify if there is a device connected to the respective CS. If we identify that a device is connected the values read give us complete details about the device. This along with the base AC timings specified by JESD209-2 allows us to do a complete automatic initialization of SDRAM that works on all boards. Please note that the default AC timings specified by JESD209-2 will be safe for all devices but not necessarily optimal. However, for the Elpida devices used on Panda and SDP the default timings are both safe and optimal. Signed-off-by: NAneesh V <aneesh@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Aneesh V 提交于
Calculate EMIF register values based on AC timing parameters from the SDRAM datasheet and the DDR frequency rather than using the hard-coded values. For a new board the user doen't have to go through the tedious process of calculating the register values. Instead, just provide the AC timings from the device data sheet as input and the driver will automatically calculate the register values. Signed-off-by: NAneesh V <aneesh@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Aneesh V 提交于
Add support for the SDRAM controller (EMIF). Signed-off-by: NAneesh V <aneesh@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Aneesh V 提交于
Add support for: 1. DPLL locking 2. Initialization of clock domains and clock modules 3. Setting up the right voltage on voltage rails This work draws upon previous work done for x-loader by: Santosh Shilimkar <santosh.shilimkar@ti.com> Rajendra Nayak <rnayak@ti.com> Signed-off-by: NAneesh V <aneesh@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-