With newer kernel.org GCC (7.3.0 or 8.1.0), the u-boot.rom image
built for qemu-x86_64 target does not boot. It keeps resetting
soon after the 32-bit SPL jumps to 64-bit proper. Debugging shows
that the reset happens inside env_callback_init().

000000000113dd85 <env_callback_init>:
 113dd85:       41 54                   push   %r12
 113dd87:       55                      push   %rbp
 113dd88:       31 c0                   xor    %eax,%eax
 113dd8a:       53                      push   %rbx
 113dd8b:       0f 57 c0                xorps  %xmm0,%xmm0

Executing "xorps %xmm0,%xmm0" causes CPU to immediately reset.
However older GCC like 5.4.0 (the one shipped by Ubuntu 16.04)
does not generate such instructions that utilizes SSE for this
function - env_callback_init() and U-Boot boots without any issue.
Explicitly specifying -march=core2 for newer GCC allows U-Boot
proper to boot again. Examine assembly codes of env_callback_init
and there is no SSE instruction in that function hence U-Boot
continues to boot.

core2 seems to be the oldest arch in GCC that supports 64-bit.
Like 32-bit U-Boot build we use -march=i386 which is the most
conservative cpu type so that the image can run on any x86
processor, let's do the same for the 64-bit U-Boot build.
Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Once we get a zero pointer from load_zimage(...) we must bunch out
instead of continue boot.
Signed-off-by: NHannes Schmelzer <hannes.schmelzer@br-automation.com>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>

In initr_bootstage() we call bootstage_mark_name() which ends up calling
timer_get_us(). This call happens before initr_dm(), which inits driver
model.

On x86 we set gd->timer to NULL in the transition from board_init_f()
to board_init_r(). See board_init_f_r() for this assignment. So U-Boot
knows there is no timer available in the period immediately after
relocation.

On x86 the timer_get_us() call is implemented as calls to get_ticks() and
get_tbclk(). Both of these call dm_timer_init() to set up the timer, if
gd->timer is NULL and the early timer is not available.

However dm_timer_init() cannot succeed before initr_dm() is called.

So it seems that on x86 if we want to use CONFIG_BOOTSTAGE we must enable
CONFIG_TIMER_EARLY. Update the Kconfig to handle this.

Note: On most architectures we can rely on the pre-relocation memory still
being available, so that gd->timer pointers to a valid timer device and
everything works correctly. Admittedly this is not strictly correct since
the timer device is set up by pre-relocation U-Boot, but normally this is
fine. On x86 the 'CAR' (cache-as-RAM) memory used by pre-relocation U-Boot
disappears in board_init_f_r() and any attempt to access it will hang.
This is the reason why we must mark the timer as invalid when we get to
board_init_f_r().
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>

Some platforms use this instead of FSP to set up the platform, including
memory. Add support for this in binman. This is needed for
chromebook_samus, for example.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>

With bootstage now allocating pre-relocation memory the current amount
available is insufficient. Increase it a little.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>

Add test which checks if a PCI device described in DT with an
entry and reg = <...> property, but without compatible string
results in a valid U-Boot PCI udevice with the udevice.node
populated with reference to this DT node. Also check if the
other PCI device without a DT node does not contain any bogus
udevice.node.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>

Add PCI entry without compatible string and with a DT node only with
reg = <...> property into the DT. This is needed for the tests to
verify whether such a setup creates an U-Boot PCI device with the
DT node associated with it in udevice.node.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>

Reword the documentation to make it clear the compatible string is now
optional, yet still matching on it takes precedence over PCI IDs and
PCI classes.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>

The PCI controller can have DT subnodes describing extra properties
of particular PCI devices, ie. a PHY attached to an EHCI controller
on a PCI bus. This patch parses those DT subnodes and assigns a node
to the PCI device instance, so that the driver can extract details
from that node and ie. configure the PHY using the PHY subsystem.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>

%s/CMD_RET_SUCCESX/CMD_RET_SUCCESS/g
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

This converts the following to Kconfig:
   CONFIG_FLASH_CFI_DRIVER
   CONFIG_SYS_FLASH_USE_BUFFER_WRITE
   CONFIG_FLASH_CFI_MTD
   CONFIG_SYS_FLASH_PROTECTION
   CONFIG_SYS_FLASH_CFI
Signed-off-by: NAdam Ford <aford173@gmail.com>
[trini: Re-migrate]
Signed-off-by: NTom Rini <trini@konsulko.com>

To make testing with clang support easier, add sandbox/clang-7
combination to our testing matrix.  To facilitate this, switch to using
the "sources" method that the travis.yml file supports to list
additional repositories and add the official one for llvm-7.  Due to
buildman not supporting using clang at this time add logic to manually
build a single sandbox configuration in the expected output directory so
that we can still invoke all of our tests.

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Add new Kconfig option, SYS_BOOTCOUNT_MAGIC, to select the boot
counter magic word. This can be useful ie. in case the entire
boot counter register is not usable.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Tom Rini <trini@konsulko.com>

Currently this uses x86_64 version toolchain for x86 build in
travis-ci. Change it to i386 version to avoid updating the
buildman toolchain path every time when the toolchain version
number is changed, eg: from 7.3.0 to 8.1.0.
Signed-off-by: NBin Meng <bmeng.cn@gmail.com>

or32 is not supported by U-Boot anymore.
Signed-off-by: NBin Meng <bmeng.cn@gmail.com>

This value is unly used in arch/arm/mach-omap2/am33xx/
clock_am33xx.c, so let's make it dependent on AM33XX since
that is the only way this file gets compiled into the code
according to the Makefile.
Signed-off-by: NAdam Ford <aford173@gmail.com>
Reviewed-by: NTom Rini <trini@konsulko.com>
[trini: Fix symbol name]
Signed-off-by: NTom Rini <trini@konsulko.com>

The option has never existed and config whitelist script accumulates
it from a comment block, wipe it out from the source code.
Signed-off-by: NVladimir Zapolskiy <vz@mleia.com>

The option is unused, SPL image gets a wanted boot device by standard
spl_boot_device() call.
Signed-off-by: NVladimir Zapolskiy <vz@mleia.com>

The CONFIG_LPC32XX_SPL option from board include file has never been
used, it is safe to remove it.
Signed-off-by: NVladimir Zapolskiy <vz@mleia.com>

To prevent accidental build failures the change converts a number of
NXP LPC32xx specific image targets to be conditionally dependent on
target build configuration. The wrapped image targets always contain
a U-Boot SPL binary and the images are supposed to be directly flashed
on a NAND flash device for read access by LPC32xx NAND MLC controller.
Signed-off-by: NVladimir Zapolskiy <vz@mleia.com>

The explicit arch specific build symbol allows to group supported
boards, generalize common config options and it will serve as
a dependency for platform only drivers.

Two related board defconfigs are resynced after the change.
Signed-off-by: NVladimir Zapolskiy <vz@mleia.com>

The PRR syscon driver is available too late for Multi DTB build
of U-Boot. Replace it with simple check whether a platform is
Gen3 or not and produce an address of the PRR.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>

Build the -u-boot variants of the device trees so they can be included
in Multi-DTB fitImage, which in turn allows us to build single U-Boot
image for multiple boards.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>

Add device tree nodes for USB2.0(EHCI) on R-Car E3 Ebisu board.
Signed-off-by: NHiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>

When referring to the MSTPSR register, it contains the clock
status of SYS, RT, SECURE, and controlling SMSTPCR using this
value has the problem of being affected by the RT and SECURE
status.This patch changes the reference register to SMSTPCR.
Signed-off-by: NHiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>

This patch enables the cache command, mostly for convenience of testing.
Signed-off-by: NHiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>

Tidy up unused definition related to power control of 3DG.
Signed-off-by: NHiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>

GSX clock force supply code is unnecessary at U-Boot,
because GSX clock control is supported at the kernel driver.
Signed-off-by: NHiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>

This code is unnecessary, because these registers are set by the
initial program loader (IPL).
Signed-off-by: NHiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>

U-Boot uses ARM generic timer, TMU0 and TMU1 are not used, remove them.
Signed-off-by: NHiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>

This patch removes 'console=' argument, because kernel uses
stdout-path as parameter.
Signed-off-by: NHiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>

This patch fixes the write-protect control of CPG.
Signed-off-by: NHiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>

Patch queue for efi - 2018-10-17

A few bug fixes for the 2018.11 release:

  - Fix block seeking on 32bit
  - Fix execution with DEBUG set
  - Fix a few Coverity found bugs
  - Fix warnings

Heinrich Schuchardt (13):
      efi_loader: fix relocation on x86_64
      efi_loader: correct signature of GetPosition, SetPosition
      efi_loader: execute efi_save_gd() first
      efi_loader: efi_allocate_pool(EFI_ALLOCATE_ANY_PAGES, ...)
      efi_loader: error handling in read_console()
      efi_loader: return type efi_console_register()
      efi_loader: superfluous statement in is_dir()
      efi_loader: memory leak in efi_set_variable()
      efi_loader: remove lcd.h from efi_net.c
      arm: do not include efi_loader.h twice
      efi_loader: fix typo in efi_boottime.c
      efi_selftest: creating new handle in controller test
      efi_loader: efi_dp_get_next_instance() superfluous statement

Tom Rini (2):
      efi_loader: Fix warning in efi_load_image()
      fs: fat: Fix warning in normalize_longname()

Remove a superfluous statement in efi_dp_get_next_instance().
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

When the last protocol interface is uninstalled the handle is deleted but
this does not set the value of the handle to NULL.

To create a new handle with OpenProtocolInterface the value of the handle
must be NULL.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Xilinx changes for v2018.11-rc2-v2

FPGA:
- Fix SPL fpga loading from FIT

ARM64:
- Fix gic accesses in EL2/EL1

Xilinx:
- Add dlc20 board support
- Add Versal board support
- Sync defconfigs
- Enable MP via Kconfig
- Add missing efuse node
- Enable CDC for zcu100

cmd:
- Fix kgdb Kconfig dependency

Only PPC supports this option that's why there should be proper
dependency setup via Kconfig.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Simplify defconfig for ZynqMP but keep option not to enable it for mini
targets.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

This patch adds new zynqmp command "zynqmp tcminit mode" to
initialize TCM. TCM needs to be initialized before accessing
to avoid ECC errors. This new command helps to perform
the same. It also makes tcm_init() as global and uses it for
doing the TCM initialization.
Signed-off-by: NSiva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>