- 03 10月, 2012 7 次提交
-
-
由 Tetsuyuki Kobayashi 提交于
Adjust low level hardware setting in s_init. Signed-off-by: NTetsuyuki Kobayashi <koba@kmckk.co.jp> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Tetsuyuki Kobayashi 提交于
Reserve first 16MB for RT-CPU (as same as kernel config). Signed-off-by: NTetsuyuki Kobayashi <koba@kmckk.co.jp> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Nobuhiro Iwamatsu 提交于
The KZM-A9-GT board has Renesas R-Mobile SH73A0, 512MB DDR2-SDRAM, USB, Ethernet, and more. This patch supports the following functions: - 512MB DDR2-SDRAM - 16MB NOR Flash memory - Serial console (SCIF) - Ethernet (SMSC) - I2C Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Nobuhiro Iwamatsu 提交于
Renesas SH73A0 has GPIO based PFC. This privode framework of PFC. The code included in this base from linux kernel. Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Nobuhiro Iwamatsu 提交于
Renesas SH73A0 is CPU with Cortex-A9. This supports the basic register definition and GPIO. Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Nobuhiro Iwamatsu 提交于
This patch adds minimum support for R-Mobile. Only minimal support with timer. This CPU can uses the peripheral of Renesas SuperH. Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Nobuhiro Iwamatsu 提交于
ARMv7 has global timer. This provides the register definition of this timer. Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
- 02 10月, 2012 14 次提交
-
-
由 Peter Meerwald 提交于
Signed-off-by: NPeter Meerwald <pmeerw@pmeerw.net>
-
由 Koen Kooi 提交于
A fast boot is important to the beaglebone, so save 2 seconds here by decreasing bootdelay. This is still plenty time to break into the prompt, I do that at least once a day. Mount the rootfs RO by default, this is needed to make fsck succeed without resorting to an initramfs. Signed-off-by: NKoen Kooi <koen@dominion.thruhere.net>
-
由 Joel A Fernandes 提交于
U-boot should not ignore getting the bootmode passed on from the bootrom. With this, U-boot SPL knows it was loaded from MMC1 and use this info to read full U-boot from MMC1 as well. Cc: pprakash@ti.com Cc: trini@ti.com Signed-off-by: NJoel A Fernandes <joelagnel@ti.com> Signed-off-by: NTom Rini <trini@ti.com>
-
由 Ilya Yanok 提交于
This patch adds support for networking in SPL. Some devices are capable of loading SPL via network so it makes sense to load the main U-Boot binary via network too. This patch tries to use existing network code as much as possible. Unfortunately, it depends on environment which in turn depends on other code so SPL size is increased significantly. No effort was done to decouple network code and environment so far. Signed-off-by: NIlya Yanok <ilya.yanok@cogentembedded.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com> Signed-off-by: NTom Rini <trini@ti.com>
-
由 Ilya Yanok 提交于
This patch adds support for networking in SPL on TI AM335x based boards. Vendor Class Identifier used by SPL during BOOTP is "AM335x U-Boot SPL". Signed-off-by: NIlya Yanok <ilya.yanok@cogentembedded.com>
-
由 Ilya Yanok 提交于
We need to initialize timer properly, otherwise all delays inside SPL will be wrong. Signed-off-by: NIlya Yanok <ilya.yanok@cogentembedded.com>
-
由 Ilya Yanok 提交于
Vendor Class Identifier option is common to BOOTP and DHCP and can be useful without PXE. So send VCI in both BOOTP and DHCP requests if CONFIG_BOOTP_VCI_STRING is defined. Signed-off-by: NIlya Yanok <ilya.yanok@cogentembedded.com> Signed-off-by: NTom Rini <trini@ti.com>
-
由 Bastian Ruppert 提交于
Signed-off-by: NBastian Ruppert <Bastian.Ruppert@Sewerin.de> CC: Tom Rini <trini@ti.com> Acked-by: NStefano Babic <sbabic@denx.de>
-
由 Bastian Ruppert 提交于
negotiation is enabled in RMII mode. Some boards based on da850 need to suppress this procedure. CC: Rajashekhara, Sudhakar <sudhakar.raj@ti.com> CC: Lad, Prabhakar <prabhakar.lad@ti.com> CC: Hadli, Manjunath <manjunath.hadli@ti.com> CC: sbabic@denx.de Acked-by: NStefano Babic <sbabic@denx.de> CC: Tom Rini <trini@ti.com> Signed-off-by: NBastian Ruppert <Bastian.Ruppert@Sewerin.de> Acked-by: NPrabhakar Lad <prabhakar.lad@ti.com>
-
由 Bastian Ruppert 提交于
Signed-off-by: NBastian Ruppert <Bastian.Ruppert@Sewerin.de> CC: Anatolij Gustschin <agust@denx.de> CC: Tom Rini <trini@ti.com> CC: Stefano Babic <sbabic@denx.de>
-
由 Bastian Ruppert 提交于
Extend the driver for placing the video/bmp logo as specified by "splashpos" environment variable. Signed-off-by: NBastian Ruppert <Bastian.Ruppert@Sewerin.de> Signed-off-by: NAnatolij Gustschin <agust@denx.de> CC: Stefano Babic <sbabic@denx.de> Signed-off-by: NTom Rini <trini@ti.com>
-
由 Bastian Ruppert 提交于
Do not allow to overwrite it when video is enabled. Signed-off-by: NBastian Ruppert <Bastian.Ruppert@Sewerin.de> CC: Tom Rini <trini@ti.com> Acked-by: NStefano Babic <sbabic@denx.de>
-
由 Bastian Ruppert 提交于
Signed-off-by: NBastian Ruppert <Bastian.Ruppert@Sewerin.de> CC: Tom Rini <trini@ti.com> Acked-by: NStefano Babic <sbabic@denx.de>
-
由 Andreas Bießmann 提交于
Signed-off-by: NAndreas Bießmann <biessmann@corscience.de> cc: Thomas Weber <weber@corscience.de>
-
- 01 10月, 2012 1 次提交
-
-
由 Albert ARIBAUD 提交于
-
- 30 9月, 2012 2 次提交
-
-
由 Simon Glass 提交于
This file is required for all archs. Fixes a sandbox build break on ext4. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Anatolij Gustschin 提交于
Commit cfda5aea (cmd_fat: use common get_device_and_partition function) introduced a warning: cmd_fat.c: In function 'do_fat_fswrite': cmd_fat.c:178:8: warning: unused variable 'ep' [-Wunused-variable] Fix it. Signed-off-by: NAnatolij Gustschin <agust@denx.de> Reported-by: NAlbert ARIBAUD <albert.u.boot@aribaud.net> Tested-by: NAlbert ARIBAUD <albert.u.boot@aribaud.net>
-
- 29 9月, 2012 10 次提交
-
-
由 Lei Wen 提交于
Signed-off-by: NLei Wen <leiwen@marvell.com>
-
由 Lei Wen 提交于
Signed-off-by: NLei Wen <leiwen@marvell.com>
-
由 Lei Wen 提交于
We often need the requirement that compressing those memory range start from 0, but the default deflate code in zlib prevent us to do this. Considering the special case of uboot, that it could access all memory range, it is reasonable to be able to also take the address space from 0 into compression. Signed-off-by: NLei Wen <leiwen@marvell.com>
-
由 Lei Wen 提交于
Add a new config CONFIG_GZIP_ENABLED, if enabled, the uboot bin would include zlib's deflate method which could be used for compressing. Signed-off-by: NLei Wen <leiwen@marvell.com>
-
由 Lei Wen 提交于
Signed-off-by: NLei Wen <leiwen@marvell.com>
-
由 Lei Wen 提交于
Signed-off-by: NLei Wen <leiwen@marvell.com>
-
由 Albert ARIBAUD 提交于
-
由 Albert ARIBAUD 提交于
-
由 Pavel Herrmann 提交于
We set sata_curr_device to 0 right after returning from init_sata(), so there's no point in setting it to the last scanned driver at this point. Note: there are more duplicities with cmd_sata, but those might be required, as the code seems to reset the entire controller on every scan, ignoring the requested port number. Signed-off-by: NPavel Herrmann <morpheus.ibis@gmail.com>
-
由 Stephen Warren 提交于
Commit 10a37fd7 "disk: get_device_and_partition() "auto" partition" prevented the use of "-" on the command-line to request fallback to the $bootdevice environment variable instead. This patch allows that, or an empty string "" to be used. Tested: setenv bootfile /boot/zImage setenv bootdevice 0:1 ext2load mmc 0:1 ext2load mmc - ext2load mmc "" Signed-off-by: NStephen Warren <swarren@nvidia.com>
-
- 28 9月, 2012 6 次提交
-
-
-
由 Pavel Machek 提交于
Signed-off-by: NPavel Machek <pavel@denx.de> Signed-off-by: NTom Rini <trini@ti.com>
-
由 Tom Rini 提交于
First, remove the puts from the case where we don't have an mkimage header as this is somewhat common and intentional for no-arg target images. Second, rework the final switch statement in board_init_r to, in the case of !CONFIG_SPL_OS_BOOT be only about doing debug prints about if we know what the magic is or not (the CONFIG_SPL_OS_BOOT case is unchanged). Then we call jump_to_image_no_args(). This gives us the same behavior as before but with slightly smaller code. Signed-off-by: NTom Rini <trini@ti.com>
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@ti.com>
-
由 Stefan Roese 提交于
By setting CONFIG_SYS_UBOOT_START boards can now use a different entry point for their U-Boot image. So the U-Boot entry point is not fixed to CONFIG_SYS_TEXT_BASE any more. Signed-off-by: NStefan Roese <sr@denx.de> Signed-off-by: NTom Rini <trini@ti.com>
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@ti.com>
-