- 12 8月, 2019 1 次提交
-
-
由 Simon Glass 提交于
Move env_set() over to the new header file. Acked-by: NJoe Hershberger <joe.hershberger@ni.com> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 07 5月, 2018 1 次提交
-
-
由 Tom Rini 提交于
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 09 4月, 2018 1 次提交
-
-
由 Alex Kiernan 提交于
In order that we can use eth_env_* even when CONFIG_NET isn't set, move these functions to environment code from net code. This fixes failures such as: board/ti/am335x/built-in.o: In function `board_late_init': board/ti/am335x/board.c:752: undefined reference to `eth_env_set_enetaddr' u-boot/board/ti/am335x/board.c:766: undefined reference to `eth_env_set_enetaddr' which caters for use cases such as: commit f411b5cc ("board: am335x: Always set eth/eth1addr environment variable") when Ethernet is required in Linux, but not U-Boot. Signed-off-by: NAlex Kiernan <alex.kiernan@gmail.com>
-
- 16 8月, 2017 2 次提交
-
-
由 Simon Glass 提交于
Rename this function for consistency with env_get(). Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Rename this function for consistency with env_set(). Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 15 5月, 2017 1 次提交
-
-
由 Masahiro Yamada 提交于
Now CONFIG_GENERIC_MMC and CONFIG_MMC match for all defconfig. We do not need two options for the same feature. Deprecate the former. This commit was generated with the sed script 's/GENERIC_MMC/MMC/' and manual fixup of drivers/mmc/Kconfig. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
- 20 3月, 2017 1 次提交
-
-
由 Jean-Jacques Hiblot 提交于
To keep a consistent MMC device mapping in SPL and in u-boot, let's register the MMC controllers the same way in u-boot and in the SPL. In terms of boot time, it doesn't hurt to register more controllers than needed because the MMC device is initialized only prior being accessed for the first time. Having the same device mapping in SPL and u-boot allows us to use the environment in SPL whatever the MMC boot device. Signed-off-by: NJean-Jacques Hiblot <jjhiblot@ti.com>
-
- 19 4月, 2015 1 次提交
-
-
由 Joe Hershberger 提交于
Use "_ethaddr" at the end of variables and drop CamelCase. Make constant values actually 'const'. Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
- 04 3月, 2014 1 次提交
-
-
由 Mugunthan V N 提交于
Some platforms like AM437x have different EVMs with different phy addresses, so this patch adds support for passing phy address via cpsw plaform data. Also renamed phy_id to phy_addr so better understanding of the code. Reviewed-by: NFelipe Balbi <balbi@ti.com> Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> [trini: Update BuR am335x_igep0033 pcm051_rev3 pcm051_rev1 cm_t335 pengwyn boards] Signed-off-by: NTom Rini <trini@ti.com>
-
- 19 12月, 2013 1 次提交
-
-
由 Lokesh Vutla 提交于
Currently same value is programmed for all ioregs. This is not the case for all SoC's like AM4372. So adding a structure for ioregs and updating in all board files. And also return from config_cmd_ctrl() and config_ddr_data() functions if data is not passed. Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com> [trini: Fixup dxr2, cm_t335, adapt pcm051 rev3] Signed-off-by: NTom Rini <trini@ti.com>
-
- 04 12月, 2013 1 次提交
-
-
由 Tom Rini 提交于
Based on the definitive guide to EMIF configuration[1] certain registers that we have been modifying (and are documented registers) should be left in their reset values rather than modified. This has been tested on AM335x GP EVM and Beaglebone White. [1]: http://processors.wiki.ti.com/index.php/AM335x_EMIF_Configuration_tips Cc: Enric Balletbo i Serra <eballetbo@iseebcn.com> Cc: Javier Martinez Canillas <javier@dowhile0.org> Cc: Heiko Schocher <hs@denx.de> Cc: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: NTom Rini <trini@ti.com> Tested-by: NMatt Porter <matt.porter@linaro.org>
-
- 16 8月, 2013 1 次提交
-
-
由 Tom Rini 提交于
We defined PHYS_DRAM_1 to 0x80000000 (start of DRAM) and then used this for CONFIG_SYS_SDRAM_BASE. But then we kept on referencing PHYS_DRAM_1 in other places. Change to directly setting CONFIG_SYS_DRAM_BASE and then using that name in code. Signed-off-by: NTom Rini <trini@ti.com>
-
- 15 8月, 2013 2 次提交
-
-
由 Heiko Schocher 提交于
s_init has the same outline for all the AM33xx based board. So making it generic. This also helps in addition of new Soc with minimal changes. Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com> Signed-off-by: NHeiko Schocher <hs@denx.de> Signed-off-by: NTom Rini <trini@ti.com> Tested-by: NHeiko Schocher <hs@denx.de> Acked-by: NHeiko Schocher <hs@denx.de>
-
由 Lokesh Vutla 提交于
Cleaning up the clocks layer. This helps in addition of new Soc with minimal changes. This is derived from OMAP4 boards. Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com> Tested-by: NHeiko Schocher <hs@denx.de> Acked-by: NHeiko Schocher <hs@denx.de>
-
- 27 7月, 2013 1 次提交
-
-
由 Mugunthan V N 提交于
BD ram address may vary in various SOC, so removing the hardcoding and passing the same information through platform data Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com>
-
- 24 7月, 2013 1 次提交
-
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: NTom Rini <trini@ti.com>
-
- 18 6月, 2013 2 次提交
-
-
由 Heiko Schocher 提交于
move uart soft reset code to common place and call this function from board code, instead of copy and paste this code for every board. Signed-off-by: NHeiko Schocher <hs@denx.de> Cc: Matt Porter <mporter@ti.com> Cc: Lars Poeschel <poeschel@lemonage.de> Cc: Tom Rini <trini@ti.com> Cc: Enric Balletbo i Serra <eballetbo@iseebcn.com> Acked-by: NTom Rini <trini@ti.com> [trini: Fix igep0033 build, remove 'regval' on pcm051] Signed-off-by: NTom Rini <trini@ti.com>
-
由 Heiko Schocher 提交于
move rtc32k_enable() to common place so all am33xx boards can use it. Signed-off-by: NHeiko Schocher <hs@denx.de> Cc: Matt Porter <mporter@ti.com> Cc: Lars Poeschel <poeschel@lemonage.de> Cc: Tom Rini <trini@ti.com> Cc: Enric Balletbo i Serra <eballetbo@iseebcn.com>
-
- 05 6月, 2013 1 次提交
-
-
由 Tom Rini 提交于
We need to call the save_omap_boot_params function on am33xx/ti81xx and other newer TI SoCs, so move the function to boot-common. Only OMAP4+ has the omap_hw_init_context function so add ifdefs to not call it on am33xx/ti81xx. Call save_omap_boot_params from s_init on am33xx/ti81xx boards. Reviewed-by: NR Sricharan <r.sricharan@ti.com> Signed-off-by: NTom Rini <trini@ti.com>
-
- 10 5月, 2013 2 次提交
-
-
由 Matt Porter 提交于
Adds CPSW support to the TI814X EVM configured with an ET1011C PHY in GMII mode. Signed-off-by: NMatt Porter <mporter@ti.com> Reviewed-by: NTom Rini <trini@ti.com>
-
由 Matt Porter 提交于
Enables required PLLs and clocks for CPSW on TI814x. Signed-off-by: NMatt Porter <mporter@ti.com> Reviewed-by: NTom Rini <trini@ti.com>
-
- 25 3月, 2013 1 次提交
-
-
由 Matt Porter 提交于
Add TI814X EVM board directory, config file, and MAINTAINERS entry. Enable build. Signed-off-by: NMatt Porter <mporter@ti.com> Reviewed-by: NTom Rini <trini@ti.com> [trini: Adapt to recent omap_hsmmc requirements, Matt re-tested] Signed-off-by: NTom Rini <trini@ti.com>
-