- 09 11月, 2013 3 次提交
-
-
由 Masahiro Yamada 提交于
This commit omits non-existing drivers/net/netarm_eth.c from the list. This driver is deleted by commit b411eb30. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
The following serial drivers do not exist any more. - ns9750_serial.c: deleted by commit 4cfc611b - s3c4510b_uart.c: deleted by commit afad4029 - serial_clps7111.c: deleted by commit f2e08015 - serial_netarm.c: deleted by commit b411eb30 This commit cleans up UDM-serial.txt. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
Everytime a dead driver is removed from the list, we must re-number. This is a painful task. Try git show e5323225 -- doc/driver-model/UDM-serial.txt git show 6f62f420 -- doc/driver-model/UDM-serial.txt git show b9f4bc34 -- doc/driver-model/UDM-serial.txt to see what I mean. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
- 08 11月, 2013 16 次提交
-
-
由 Igor Grinberg 提交于
There is no CONFIG_PCA953X_INFO symbol. U-Boot uses CONFIG_CMD_PCA953X_INFO instead, which is described in "Monitor Functions" section and thus no need to be repeated in the "GPIO Support" section. Remove the whole line. Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il>
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Miao Yan 提交于
In commit "5c427e49: use BOOTM_STATE_OS_CMDLINE flag for plain bootm" and "3d187b39: Only pass BOOTM_STATE_OS_CMDLINE on PowerPC/MIPS", BOOTM_STATE_OS_CMDLINE was added to do_bootm for PowerPC and MIPS. This breaks other OSes (vxworks, netbsd, plan9,...) that don't support subcommand processing, e.g. they all contain the following code in their do_bootm_xxx(): if (flag & BOOTM_STATE_OS_PREP) return 0; if ((flag != 0) && (flag != BOOTM_STATE_OS_GO)) return 1; which will result a "subcommand not supported" error. This patch changes the above logic to: /* if not go command, pretend everything to be OK */ if (flag != BOOTM_STATE_OS_GO) return 0; Signed-off-by: NMiao Yan <miao.yan@windriver.com>
-
由 Masahiro Yamada 提交于
In-tree build: - Do not create a symbolic link from include/asm to arch/${ARCH}/include/asm - Add ${SRCTREE}/arch/arm/include into the header search path Out-of-tree build: - Do not create a directory ${OBJTREE}/include2 - Do not create a symbolic link from ${OBJTREE}/include2/asm to ${SRCTREE}/arch/${ARCH}/include/asm - Add ${SRCTREE}/arch/arm/include into the header search path Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Viktar Palstsiuk 提交于
Signed-off-by: NViktar Palstsiuk <viktar.palstsiuk@promwad.com>
-
由 Luka Perkov 提交于
Remove 'HEAD' line which is most likely left there while rebasing. It was introduced in commit 877bfe37. Signed-off-by: NLuka Perkov <luka@openwrt.org>
-
由 Paul Burton 提交于
Commit 93e14596 "Coding Style cleanup: replace leading SPACEs by TABs" added trailing whitespace to a single line of boards.cfg. I presume this was unintentional, and it causes the file to change after running it through the reformat.py script. Remove the offending character. Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
-
由 Andrew Ruder 提交于
env exists is a way to test (in hush) if an environment variable exists. A workaround existed using printenv but this new command doesn't require all the stdout/stderr redirection to prevent printing information to the screen. Example: $ set testexists 1 $ env exists testexists && echo "yes" yes $ env exists testexists || echo "no" $ set testexists $ env exists testexists && echo "yes" $ env exists testexists || echo "no" no $ Signed-off-by: NAndrew Ruder <andrew.ruder@elecsyscorp.com>
-
由 Masahiro Yamada 提交于
We expect boards_by_* function to return the 7th filed, 'Target', not the 6th field, 'Board name'. So the function names, boards_by_* are a little misleading, and should be renamed to targets_by_*. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
-
由 Masahiro Yamada 提交于
Commit 27af930e changed the boards.cfg format and it changed boards_by_field() function incorrectly. For tegra cpus it returned Board Name field, not Target field. This commit restores the behavior prior to 27af930e in the right way. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
-
由 Masahiro Yamada 提交于
Commit 27af930e changed the boards.cfg format but missed to change get_target_arch() fuction. This commit adjusts it for CROSS_COMPILE_<ARCH> to work correctly. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
-
由 Masahiro Yamada 提交于
If you do `./MAKEALL -M ` or `./MAKEALL -m` GNU awk would display warnings like follows: awk: warning: escape sequence `\ ' treated as plain ` ' In the first place, we do not explicitly set the field separator. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
-
由 Masahiro Yamada 提交于
arch/sparc/cpu/leon3/start.S requires CONFIG_SYS_SPARC_NWINDOES to be defined: #ifndef CONFIG_SYS_SPARC_NWINDOWS #error Must define number of SPARC register windows, default is 8 #endif But it missed to include <config.h>, which always ended up in compile error. This commit fixes this problem. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Daniel Hellstrom <daniel@gaisler.com>
-
由 Masahiro Yamada 提交于
Commit 1b0757ec deleted the EP88x entry from boards.cfg file. But it missed to remove include/configs/EP88x.h and board/ep88x/. This commit removes them and adds EP88x to README.scrapyard. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de>
-
由 Masahiro Yamada 提交于
Some tabs have been replaced with spaces because doc/README.scrapyard is consistently using spaces. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Klaus Heydeck <heydeck@kieback-peter.de>
-
- 07 11月, 2013 2 次提交
-
-
- 06 11月, 2013 7 次提交
-
-
由 jason 提交于
Signed-off-by: NJason Jin <Jason.Jin@freescale.com>
-
The malloc space is to small to boot, the current uboot 2013.10-rcX, This will fix the startup problems by increasing the mallog space to 4MiB. Signed-off-by: NJens Scharsig (BuS Elektronik) <esw@bus-elektronik.de>
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Michal Simek 提交于
Here is the set of command which has been performed to proof this feature. gzip < fpga.bin > fpga.bin.gz mkimage -A arm -O u-boot -T firmware -C gzip \ -a 20000000 -n "zc702_fpga_bin" -d fpga.bin.gz fpga.bin.gz.ub tftp 100000 fpga.bin.gz.ub fpga loadmk 0 100000 This flow should speedup loading bitstream data from external memory and save image footprint in non volatile memory. Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Acked-by: NJagannadha Sutradharudu Teki <jaganna@xilinx.com>
-
由 Michal Simek 提交于
DMA doesn't work when src is placed below 1MB limit. Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Acked-by: NJagannadha Sutradharudu Teki <jaganna@xilinx.com>
-
Buffers must be cache and dma aligned. Signed-off-by: NJagannadha Sutradharudu Teki <jaganna@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
- 05 11月, 2013 12 次提交
-
-
由 Rob Herring 提交于
pxelinux and syslinux differ in their handling of absolute paths in menu files. A pxelinux path is aways prepended with the bootfile path while syslinux allows for absolute paths. u-boot was always treating a leading / as an absolute path breaking some pxelinux setups. Fix this by adding a flag to distinguish pxelinux vs. syslinux behavior. Reported-by: NIan Campbell <Ian.Campbell@citrix.com> Signed-off-by: NRob Herring <rob.herring@calxeda.com>
-
由 Rob Herring 提交于
Convert versatile to use the commmon timer code. Signed-off-by: NRob Herring <rob.herring@calxeda.com>
-
由 Rob Herring 提交于
Convert tegra to use the commmon timer code. Signed-off-by: NRob Herring <rob.herring@calxeda.com>
-
由 Rob Herring 提交于
Convert socfpga to use the commmon timer code. Signed-off-by: NRob Herring <rob.herring@calxeda.com>
-
由 Rob Herring 提交于
Convert vexpress to use the commmon timer code. Signed-off-by: NRob Herring <rob.herring@calxeda.com>
-
由 Rob Herring 提交于
Convert mx25 to use the commmon timer code. Signed-off-by: NRob Herring <rob.herring@calxeda.com>
-
由 Rob Herring 提交于
Convert highbank to use the commmon timer code. Signed-off-by: NRob Herring <rob.herring@calxeda.com>
-
由 Rob Herring 提交于
Convert sh to use the commmon timer code. Remove reset_timer and set_timer as they are unused on sh. Signed-off-by: NRob Herring <rob.herring@calxeda.com>
-
由 Rob Herring 提交于
Many platforms duplicate pretty much the same timer code yet they all have a 32-bit freerunning counter register. Create a common implementation that minimally requires 2 or 3 defines to add timer support: CONFIG_SYS_TIMER_RATE - Clock rate of the timer counter CONFIG_SYS_TIMER_COUNTER - Address of 32-bit counter CONFIG_SYS_TIMER_COUNTS_DOWN - Define if counter counts down All functions are weak or ifdef'ed so they can still be overriden by any platform. Signed-off-by: NRob Herring <rob.herring@calxeda.com>
-
由 Rob Herring 提交于
This fixes building time.c when unreferenced functions are added. Signed-off-by: NRob Herring <rob.herring@calxeda.com>
-
由 Rob Herring 提交于
Remove platform CONFIG_SYS_HZ definition for configs a-z*. Signed-off-by: NRob Herring <rob.herring@calxeda.com>
-
由 Rob Herring 提交于
Remove platform CONFIG_SYS_HZ definition for configs A-Z*. Signed-off-by: NRob Herring <rob.herring@calxeda.com>
-