- 25 11月, 2013 2 次提交
-
-
由 Igor Grinberg 提交于
Some GPIO connected LEDs have inverted polarity. Introduce new config option: CONFIG_GPIO_LED_INVERTED_TABLE for the specifying the inverted GPIO LEDs list and add support for this in the gpio_led driver. Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il> Tested-by: NIlya Ledvich <ilya@compulab.co.il>
-
由 Igor Grinberg 提交于
The CONFIG_GPIO_LED symbol does not have any documentation in the README file. Document the CONFIG_GPIO_LED symbol. Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il>
-
- 13 11月, 2013 3 次提交
-
-
由 Heiko Schocher 提交于
- add zync i2c driver to new multibus/multiadpater support - adapted all config files, which uses this driver Signed-off-by: NHeiko Schocher <hs@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Michal Simek <michal.simek@xilinx.com>
-
由 Heiko Schocher 提交于
- add omap24xx driver to new multibus/multiadpater support - adapted all config files, which uses this driver Tested on the am335x based siemens boards rut, dxr2 and pxm2 posted here: http://patchwork.ozlabs.org/patch/263211/Signed-off-by: NHeiko Schocher <hs@denx.de> Tested-by: NTom Rini <trini@ti.com> Cc: Lars Poeschel <poeschel@lemonage.de> Cc: Steve Sakoman <sakoman@gmail.com> Cc: Thomas Weber <weber@corscience.de> Cc: Tom Rix <Tom.Rix@windriver.com> Cc: Grazvydas Ignotas <notasas@gmail.com> Cc: Enric Balletbo i Serra <eballetbo@iseebcn.com> Cc: Luca Ceresoli <luca.ceresoli@comelit.it> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Ilya Yanok <yanok@emcraft.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Nishanth Menon <nm@ti.com> Cc: Pali Rohár <pali.rohar@gmail.com> Cc: Peter Barada <peter.barada@logicpd.com> Cc: Nagendra T S <nagendra@mistralsolutions.com> Cc: Michael Jones <michael.jones@matrix-vision.de> Cc: Raphael Assenat <raph@8d.com> Acked-by: NIgor Grinberg <grinberg@compulab.co.il> Acked-by: NStefano Babic <sbabic@denx.de>
-
由 Nobuhiro Iwamatsu 提交于
This updates to new I2C framwwork on sh_i2c. And this also updates boards(kzm9g and ecovec) that using sh_i2c. Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
- 09 11月, 2013 1 次提交
-
-
由 Przemyslaw Marczak 提交于
This patch allows exiting from UMS mode to u-boot prompt by detaching usb cable or by pressing ctrl+c. Add new config: CONFIG_USB_CABLE_CHECK. If defined then board file should provide function: usb_cable_connected() (include/usb.h) that return 1 if cable is connected and 0 otherwise. Changes v2: - add a note to the README Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com> Cc: Marek Vasut <marex@denx.de>
-
- 08 11月, 2013 2 次提交
-
-
由 Igor Grinberg 提交于
There is no CONFIG_PCA953X_INFO symbol. U-Boot uses CONFIG_CMD_PCA953X_INFO instead, which is described in "Monitor Functions" section and thus no need to be repeated in the "GPIO Support" section. Remove the whole line. Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il>
-
由 Andrew Ruder 提交于
env exists is a way to test (in hush) if an environment variable exists. A workaround existed using printenv but this new command doesn't require all the stdout/stderr redirection to prevent printing information to the screen. Example: $ set testexists 1 $ env exists testexists && echo "yes" yes $ env exists testexists || echo "no" $ set testexists $ env exists testexists && echo "yes" $ env exists testexists || echo "no" no $ Signed-off-by: NAndrew Ruder <andrew.ruder@elecsyscorp.com>
-
- 30 10月, 2013 1 次提交
-
-
由 Heiko Schocher 提交于
make CONSOLE_BG_COL/CONSOLE_FG_COL configurable through board config file. Clear video screen in video_init(). Signed-off-by: NHeiko Schocher <hs@denx.de> Cc: Anatolij Gustschin <agust@denx.de>
-
- 17 10月, 2013 3 次提交
-
-
由 Nobuhiro Iwamatsu 提交于
Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
-
由 Nobuhiro Iwamatsu 提交于
This supports i2c controller for Renesas rcar. Signed-off-by: NHisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
-
由 trem 提交于
Signed-off-by: NPhilippe Reynes <tremyfr@yahoo.fr>
-
- 15 10月, 2013 1 次提交
-
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de> [trini: Drop changes for PEP 4 following python tools] Signed-off-by: NTom Rini <trini@ti.com>
-
- 08 10月, 2013 1 次提交
-
-
由 Albert ARIBAUD 提交于
omap1510inn is orphan and has been for years now. Reove it and, as it was the only arm925t target, also remove arm925t support. Update doc/README.scrapyard accordingly. Signed-off-by: NAlbert ARIBAUD <albert.u.boot@aribaud.net>
-
- 24 9月, 2013 2 次提交
-
-
由 Afzal Mohammed 提交于
DFU spec mentions it as a method to upgrade firmware (software stored in writable non-volatile memory). It also says other potential uses of DFU is beyond scope of the spec. Here such a beyond the scope use is being attempted - directly pumping binary images from host via USB to RAM. This facility is a developer centric one in that it gives advantage over upgrading non-volatile memory for testing new images every time during development and/or testing. Directly putting image onto RAM would speed up upgrade process. This and convenience was the initial thoughts that led to doing this, speed improvement over MMC was only 1 second though - 6 sec on RAM as opposed to 7 sec on MMC in beagle bone, perhaps enabling cache and/or optimizing DFU framework to avoid multiple copy for ram (if worth) may help, and on other platforms and other boot media like NAND maybe improvement would be higher. And for a platform that doesn't yet have proper DFU suppport for non-volatile media's, DFU to RAM can be used. Another minor advantage would be to increase life of mmc/nand as it would be less used during development/testing. usage: <image name> ram <start address> <size> eg. kernel ram 0x81000000 0x1000000 Downloading images to RAM using DFU is not something new, this is acheived in openmoko also. DFU on RAM can be used for extracting RAM contents to host using dfu upload. Perhaps this can be extended to io for squeezing out register dump through usb, if it is worth. Signed-off-by: NAfzal Mohammed <afzal.mohd.ma@gmail.com> Cc: Heiko Schocher <hs@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Gerhard Sittig <gsi@denx.de> Acked-by: NMarek Vasut <marex@denx.de> Acked-by: NLukasz Majewski <l.majewski@samsung.com> Acked-by: NHeiko Schocher <hs@denx.de>
-
由 Jeroen Hofstee 提交于
Besides the change of this patchset it also updates the README to reflect that GOT-generated relocations are no longer supported on ARM. cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>
-
- 20 9月, 2013 2 次提交
-
-
由 Robert P. J. Day 提交于
Fix various misspellings of things like "environment", "kernel", "default" and "volatile", and throw in a couple grammar fixes. Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
-
由 Robert P. J. Day 提交于
Tidy up, reorder, and add newer info to the arch/ directory subsection of the README file. Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
-
- 19 9月, 2013 1 次提交
-
-
由 Masahiro Yamada 提交于
Because commit 5dc5f36 removed B2 board support, arch/arm/cpu/s3c44b0/* and arch/arm/include/asm/arch-s3c44b0/* are not necessary anymore. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Andrea Scian <andrea.scian@dave-tech.it>
-
- 12 9月, 2013 1 次提交
-
-
由 Albert ARIBAUD 提交于
Put all informations about targets, including state (active or orphan) and maintainers, in boards.cfg; remove MAINTAINERS; adjust the build system accordingly. Signed-off-by: NAlbert ARIBAUD <albert.u.boot@aribaud.net>
-
- 04 9月, 2013 1 次提交
-
-
由 Kees Cook 提交于
This adds the missing compression config items to the README. Signed-off-by: NKees Cook <keescook@chromium.org> Acked-by: NSimon Glass <sjg@chromium.org>
-
- 21 8月, 2013 3 次提交
-
-
由 Ying Zhang 提交于
Due to the nand SPL on some board(e.g. P1022DS)has a size limit, it can not be more than 4K. So, the SPL cannot initialize the DDR with the SPD code. This patch introduces TPL to enable a loader stub that is loaded by the code from the SPL. It initializes the DDR with the SPD or other operations. The TPL's size is sizeable, the maximum size is decided by the memory's size that TPL runs. It initializes the DDR through SPD code, and copys final uboot image to DDR. So there are three stage uboot images: * spl_boot, * tpl_boot, * final uboot image Signed-off-by: NYing Zhang <b40530@freescale.com> Acked-by: NYork Sun <yorksun@freescale.com>
-
由 Ying Zhang 提交于
Enable p1022ds to start from eSDHC with SPL. Signed-off-by: NYing Zhang <b40530@freescale.com> Acked-by: NYork Sun <yorksun@freescale.com>
-
由 Ying Zhang 提交于
The code from the internal on-chip ROM. It loads the final uboot image into DDR, then jump to it to begin execution. The SPL's size is sizeable, the maximum size must not exceed the size of L2 SRAM. It initializes the DDR through SPD code, and copys final uboot image to DDR. So there are two stage uboot images: * spl_boot, 96KB size. The env variables are copied to L2 SRAM, so that ddr spd code can get the interleaving mode setting in env. It loads final uboot image from offset 96KB. * final uboot image, size is variable depends on the functions enabled. Signed-off-by: NYing Zhang <b40530@freescale.com> Acked-by: NYork Sun <yorksun@freescale.com>
-
- 17 8月, 2013 1 次提交
-
-
由 Simon Glass 提交于
At present the console for linux is silent if the U-Boot console is silent, unless CONFIG_SILENT_U_BOOT_ONLY is set. I wonder if a better way would be to have an environment variable to control this? Then we can control the verbosity from scripts, and set the variable to 'no' for those boards that want Linux to boot with console output. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 10 8月, 2013 2 次提交
-
-
由 Priyanka Jain 提交于
BSC9132QDS is a Freescale Reference Design Board for BSC9132 SoC which is a integrated device that contains two powerpc e500v2 cores and two DSP starcores. To support DSP starcore -Creating LAW and TLB for DSP-CCSR space. -Creating LAW for DSP-core subsystem M2 and M3 memory -Creating LAW for 1GB DDR which is connected exclusively to DSP-cores Signed-off-by: NManish Jaggi <manish.jaggi@freescale.com> Signed-off-by: NPriyanka Jain <Priyanka.Jain@freescale.com> Acked-by: NYork Sun <yorksun@freescale.com>
-
由 York Sun 提交于
Prepare for emulator support for mpc85xx parts. Disable DDR training and skip wrlvl_cntl_2 and wrlvl_cntl_3 registers. These two registers improve stability but not supported by emulator. Add CONFIG_FSL_TBCLK_EXTRA_DIV for possible adjustment to time base. Signed-off-by: NYork Sun <yorksun@freescale.com>
-
- 27 7月, 2013 1 次提交
-
-
由 Robert Winkler 提交于
CONFIG_CMD_HDMIDETECT CONFIG_CMD_BMODE Signed-off-by: NRobert Winkler <robert.winkler@boundarydevices.com> Acked-by: NOtavio Salvador <otavio@ossystems.com.br>
-
- 24 7月, 2013 1 次提交
-
-
由 Wolfgang Denk 提交于
Like many other projects, U-Boot has a tradition of including big blocks of License headers in all files. This not only blows up the source code with mostly redundant information, but also makes it very difficult to generate License Clearing Reports. An additional problem is that even the same lincenses are referred to by a number of slightly varying text blocks (full, abbreviated, different indentation, line wrapping and/or white space, with obsolete address information, ...) which makes automatic processing a nightmare. To make this easier, such license headers in the source files will be replaced with a single line reference to Unique Lincense Identifiers as defined by the Linux Foundation's SPDX project [1]. For example, in a source file the full "GPL v2.0 or later" header text will be replaced by a single line: SPDX-License-Identifier: GPL-2.0+ We use the SPDX Unique Lincense Identifiers here; these are available at [2]. Note: From the legal point of view, this patch is supposed to be only a change to the textual representation of the license information, but in no way any change to the actual license terms. With this patch applied, all files will still be licensed under the same terms they were before. Note 2: The apparent difference between the old "COPYING" and the new "Licenses/gpl-2.0.txt" only results from switching to the upstream version of the license which is differently formatted; there are not any actual changes to the content. Note 3: There are some recurring questions about linense issues, such as: - Is a "All Rights Reserved" clause a problem in GPL code? - Are files without any license header a problem? - Do we need license headers at all? The following excerpt from an e-mail by Daniel B. Ravicher should help with these: | Message-ID: <4ADF8CAA.5030808@softwarefreedom.org> | Date: Wed, 21 Oct 2009 18:35:22 -0400 | From: "Daniel B. Ravicher" <ravicher@softwarefreedom.org> | To: Wolfgang Denk <wd@denx.de> | Subject: Re: GPL and license cleanup questions | | Mr. Denk, | | Wolfgang Denk wrote: | > - There are a number of files which do not include any specific | > license information at all. Is it correct to assume that these files | > are automatically covered by the "GPL v2 or later" clause as | > specified by the COPYING file in the top level directory of the | > U-Boot source tree? | | That is a very fact specific analysis and could be different across the | various files. However, if the contributor could reasonably be expected | to have known that the project was licensed GPLv2 or later at the time | she made her contribution, then a reasonably implication is that she | consented to her contributions being distributed under those terms. | | > - Do such files need any clean up, for example should we add GPL | > headers to them, or is this not needed? | | If the project as a whole is licensed under clear terms, you need not | identify those same terms in each file, although there is no harm in | doing so. | | > - There are other files, which include both a GPL license header | > _plus_ some copyright note with an "All Rights Reserved" clause. It | > has been my understanding that this is a conflict, and me must ask | > the copyright holders to remove such "All Rights Reserved" clauses. | > But then, some people claim that "All Rights Reserved" is a no-op | > nowadays. License checking tools (like OSLC) seem to indicate this is | > a problem, but then we see quite a lot of "All rights reserved" in | > BSD-licensed files in gcc and glibc. So what is the correct way to | > deal with such files? | | It is not a conflict to grant a license and also reserve all rights, as | implicit in that language is that you are reserving all "other" rights | not granted in the license. Thus, a file with "Licensed under GPL, All | Rights Reserved" would mean that it is licensed under the GPL, but no | other rights are given to copy, modify or redistribute it. | | Warm regards, | --Dan | | Daniel B. Ravicher, Legal Director | Software Freedom Law Center (SFLC) and Moglen Ravicher LLC | 1995 Broadway, 17th Fl., New York, NY 10023 | (212) 461-1902 direct (212) 580-0800 main (212) 580-0898 fax | ravicher@softwarefreedom.org www.softwarefreedom.org [1] http://spdx.org/ [2] http://spdx.org/licenses/Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 23 7月, 2013 6 次提交
-
-
由 Dirk Eibach 提交于
Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc> Cc: Heiko Schocher <hs@denx.de> Cc: Stefan Roese <sr@denx.de> Tested-by: NStefan Roese <sr@denx.de>
-
由 Simon Glass 提交于
This enables CONFIG_SYS_I2C on Tegra, updating existing boards and the Tegra i2c driver to support this. Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
CONFIG_I2C_MUX is replaced through the new i2c multibus/multiadapter framework, configured through CONFIG_SYS_I2C. As CONFIG_I2C_MUX is only used on the keymile boards, and they are now completely moved to the new framework, remove CONFIG_I2C_MUX. Signed-off-by: NHeiko Schocher <hs@denx.de> Cc: Holger Brunck <holger.brunck@keymile.com> Tested-By: NHolger Brunck <holger.brunck@keymile.com>
-
由 Heiko Schocher 提交于
- added to fsl_i2c driver new multibus/multiadpater support - adapted all config files, which uses this driver Signed-off-by: NHeiko Schocher <hs@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Stephen Warren <swarren@wwwdotorg.org>
-
由 Heiko Schocher 提交于
- added to soft_i2c driver new multibus/multiadpater support - adapted all config files, which uses this driver Signed-off-by: NHeiko Schocher <hs@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Stephen Warren <swarren@wwwdotorg.org>
-
由 Heiko Schocher 提交于
Signed-off-by: NHeiko Schocher <hs@denx.de> Signed-off-by: NSimon Glass <sjg@chromium.org> Cc: Henrik Nordström <henrik@henriknordstrom.net>
-
- 17 7月, 2013 2 次提交
-
-
由 Dirk Eibach 提交于
Add support for Atmel TPM devices with two wire interface. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: NReinhard Pfau <reinhard.pfau@gdsys.cc> Reviewed-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
由 Reinhard Pfau 提交于
Extend the tpm library with support for single authorized (AUTH1) commands as specified in the TCG Main Specification 1.2. (The internally used helper functions are implemented in a way that they could also be used for double authorized commands if someone needs it.) Provide enums with the return codes from the TCG Main specification. For now only a single OIAP session is supported. OIAP authorized version of the commands TPM_LoadKey2 and TPM_GetPubKey are provided. Both features are available using the 'tpm' command, too. Authorized commands are enabled with CONFIG_TPM_AUTH_SESSIONS. (Note that this also requires CONFIG_SHA1 to be enabled.) Signed-off-by: NReinhard Pfau <reinhard.pfau@gdsys.cc> Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc> Acked-by: NChe-Liang Chiou <clchiou@chromium.org> Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
- 02 7月, 2013 1 次提交
-
-
由 Robert Winkler 提交于
Remove CONFIG_SPLASH_SCREEN_PREPARE from README Add doc/README.splashprepare to document functionality Signed-off-by: NRobert Winkler <robert.winkler@boundarydevices.com> Acked-by: NIgor Grinberg <grinberg@compulab.co.il>
-
- 01 7月, 2013 1 次提交
-
-
由 Heiko Schocher 提交于
Dfu transfer uses a buffer before writing data to the raw storage device. Make the size (in bytes) of this buffer configurable through environment variable "dfu_bufsiz". Defaut value is configurable through CONFIG_SYS_DFU_DATA_BUF_SIZE Signed-off-by: NHeiko Schocher <hs@denx.de> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@ti.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Wolfgang Denk <wd@denx.de> Acked-by: NTom Rini <trini@ti.com>
-
- 26 6月, 2013 1 次提交
-
-
由 Vincent Stehlé 提交于
Align the list of default commands mentioned in the configuration options paragraph of the README with the actual definitions found in include/config_cmd_default.h Signed-off-by: NVincent Stehlé <vincent.stehle@freescale.com>
-