- 05 11月, 2020 2 次提交
-
-
由 Simon Glass 提交于
At present there are a lot of dtoc warnings reported when building chromebook_coral, of the form: WARNING: the driver intel_apl_lpc was not found in the driver list Correct these by using driver names that matches their compatible string. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Simon Glass 提交于
Fix the dtoc warning in these file by using a driver name that matches the compatible string. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
- 04 11月, 2020 1 次提交
-
-
由 Michal Simek 提交于
CONFIG_NEEDS_MANUAL_RELOC macro was out of Kconfig. Move it there to be able to use compile-time checks to reduce the number of build paths. Fixes: f9a882438966 ("dm: core: Convert #ifdef to if() in root.c") for Microblaze Reviewed-by: NTom Rini <trini@konsulko.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
- 03 11月, 2020 1 次提交
-
-
由 Heiko Schocher 提交于
Michael wrote: commit 92765f45 ("env: Access Environment in SPI flashes before relocation") at least breaks the Kontron sl28 board. I guess it also breaks others which use a (late) SPI environment. reason is, that env_init() sets the init bit, if there is no init function defined in an environment driver, and use default return value -ENOENT in this case later for setting the default environment. Change: Environment driver can now implement an init function and return, if this function does nothing, simply -ENOENT. env_init() now handles -ENOENT correct by setting the inited bit for the environment driver. And if there is no other environment driver whose init function returns 0, load than the default environment. This prevents that each environment driver needs to set the default environment. Fixes: 92765f45 ("env: Access Environment in SPI flashes before relocation") Reported-by: NMichael Walle <michael@walle.cc> Tested-by: Michael Walle <michael@walle.cc> [For the SF environment] Signed-off-by: NHeiko Schocher <hs@denx.de>
-
- 02 11月, 2020 10 次提交
-
-
https://gitlab.denx.de/u-boot/custodians/u-boot-atmel由 Tom Rini 提交于
First set of u-boot-atmel fixes for 2021.01 cycle: This specific feature set includes the patches for DT required to fix the warnings for newer DTC version (1.6.0+), i2c and spi bus unit address.
-
由 Eugen Hristev 提交于
w+arch/arm/dts/.at91sam9260ek.dtb.pre.tmp:119.21-123.7: Warning (spi_bus_reg): /ahb/apb/spi@fffc8000/mtd_dataflash@0: SPI bus unit address format error, expected "1" Signed-off-by: NEugen Hristev <eugen.hristev@microchip.com>
-
由 Eugen Hristev 提交于
w+arch/arm/dts/.at91sam9260ek.dtb.pre.tmp:119.21-123.7: Warning (spi_bus_reg): /ahb/apb/spi@fffc8000/mtd_dataflash@0: SPI bus unit address format error, expected "1" Signed-off-by: NEugen Hristev <eugen.hristev@microchip.com>
-
由 Eugen Hristev 提交于
w+arch/arm/dts/sama5d3xmb.dtsi:64.25-83.7: Warning (i2c_bus_reg): /ahb/apb/i2c@f0018000/camera@0x30: I2C bus unit address format error, expected "30" Signed-off-by: NEugen Hristev <eugen.hristev@microchip.com>
-
由 Eugen Hristev 提交于
w+arch/arm/dts/.at91sam9g45-gurnard.dtb.pre.tmp:118.21-122.7: Warning (spi_bus_reg): /ahb/apb/spi@fffa4000/mtd_dataflash@0: SPI bus unit address format error, expected "1" Signed-off-by: NEugen Hristev <eugen.hristev@microchip.com>
-
由 Eugen Hristev 提交于
w+arch/arm/dts/.at91sam9g25ek.dtb.pre.tmp:28.25-47.7: Warning (i2c_bus_reg): /ahb/apb/i2c@f8010000/camera@0x30: I2C bus unit address format error, expected "30" Signed-off-by: NEugen Hristev <eugen.hristev@microchip.com>
-
由 Eugen Hristev 提交于
w+arch/arm/dts/at91sam9g20ek_common.dtsi:100.21-104.7: Warning (spi_bus_reg): /ahb/apb/spi@fffc8000/mtd_dataflash@0: SPI bus unit address format error, expected "1" Signed-off-by: NEugen Hristev <eugen.hristev@microchip.com>
-
由 Eugen Hristev 提交于
w+arch/arm/dts/.at91sam9g20-taurus.dtb.pre.tmp:79.18-83.4: Warning (spi_bus_reg): /ahb/apb/spi@fffc8000/mtd_dataflash@0: SPI bus unit address format error, expected "1" Signed-off-by: NEugen Hristev <eugen.hristev@microchip.com>
-
由 Eugen Hristev 提交于
w+arch/arm/dts/.at91sam9261ek.dtb.pre.tmp:124.15-144.7: Warning (spi_bus_reg): /ahb/apb/spi@fffc8000/tsc2046@0: SPI bus unit address format error, expected "2" Signed-off-by: NEugen Hristev <eugen.hristev@microchip.com>
-
由 Eugen Hristev 提交于
w+arch/arm/dts/.at91-vinco.dtb.pre.tmp:131.18-134.7: Warning (i2c_bus_reg): /ahb/apb/i2c@f8024000/rtc@64: I2C bus unit address format error, expected "32" Signed-off-by: NEugen Hristev <eugen.hristev@microchip.com>
-
- 01 11月, 2020 1 次提交
-
-
https://gitlab.denx.de/u-boot/custodians/u-boot-efi由 Tom Rini 提交于
Pull request for UEFI sub-system for efi-2021-01-rc2 (2) The series contains the following enhancements * preparatory patches for UEFI capsule updates * initialization of the emulated RTC using an environment variable and a bug fix * If DisconnectController() is called for a child controller that is the only child of the driver, the driver must be disconnected.
-
- 31 10月, 2020 4 次提交
-
-
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip由 Tom Rini 提交于
- New PX30 board: Engicam PX30.Core; - Fix USB HID support for rock960; - Remove host endianness dependency for rockchip mkimage; - dts update for rk3288-tinker; - Enable console MUX for some ROCKPi boards; - Add config-based ddr selection for px30;
-
https://gitlab.denx.de/u-boot/custodians/u-boot-dm由 Tom Rini 提交于
of-platdata and dtoc improvements sandbox SPL tests binman support for compressed sections
-
由 Heinrich Schuchardt 提交于
The name of structure element logl_prev is not matched by the documentation. %s/logl_pref/logl_prev/ Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Tom Rini 提交于
- Additional log improvements - SPI flash environment improvements
-
- 30 10月, 2020 21 次提交
-
-
由 Jagan Teki 提交于
This would be useful and recommended boot flow for new boards which has doesn't have the DDR support yet in mainline. Sometimes it is very useful for debugging mainline DDR support. Documen it for px30 boot flow. Signed-off-by: NJagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
-
由 Jagan Teki 提交于
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam. C.TOUCH 2.0 is a general purpose carrier board with capacitive touch interface support. PX30.Core needs to mount on top of this Carrier board for creating complete PX30.Core C.TOUCH 2.0 board. Add support for it. Signed-off-by: NJagan Teki <jagan@amarulasolutions.com> Signed-off-by: NSuniel Mahesh <sunil@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
-
由 Jagan Teki 提交于
Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose carrier board with capacitive touch interface. Genaral features: - TFT 10.1" industrial, 1280x800 LVDS display - Ethernet 10/100 - Wifi/BT - USB Type A/OTG - Audio Out - CAN - LVDS panel connector SOM's like PX30.Core needs to mount on top of this Carrier board for creating complete PX30.Core C.TOUCH 2.0 board. Add support for it. Signed-off-by: NJagan Teki <jagan@amarulasolutions.com> Signed-off-by: NMichael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
-
由 Jagan Teki 提交于
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam. EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation Board from Engicam. PX30.Core needs to mount on top of this Evaluation board for creating complete PX30.Core EDIMM2.2 Starter Kit. Add support for it. Signed-off-by: NJagan Teki <jagan@amarulasolutions.com> Signed-off-by: NSuniel Mahesh <sunil@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
-
由 Jagan Teki 提交于
The existing common code for Engicam boards uses i.MX6, so attach that into i.MX6 Engicam boards so-that adding new SoC variants of Engicam boards become meaningful. Add support for it. Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: NJagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
-
由 Jagan Teki 提交于
TARGET_EVB_PX30 can be possible to use other px30 boards. Add the help text for existing EVB, so-that the new boards which are resuing this config option can mention their board help text. This would help to track which boards are using EVB_PX30 config. Signed-off-by: NJagan Teki <jagan@amarulasolutions.com> Reviewed-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Michael Trimarchi 提交于
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam. General features: - Rockchip PX30 - Up to 2GB DDR4 - eMMC 4 GB expandible - rest of PX30 features PX30.Core needs to mount on top of Engicam baseboards for creating complete platform boards. Possible baseboards are, - EDIMM2.2 - C.TOUCH 2.0 Add support for it. Signed-off-by: NJagan Teki <jagan@amarulasolutions.com> Signed-off-by: NMichael Trimarchi <michael@amarulasolutions.com> Reviewed-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Jagan Teki 提交于
Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation Board. Genaral features: - LCD 7" C.Touch - microSD slot - Ethernet 1Gb - Wifi/BT - 2x LVDS Full HD interfaces - 3x USB 2.0 - 1x USB 3.0 - HDMI Out - Mini PCIe - MIPI CSI - 2x CAN - Audio Out SOM's like PX30.Core needs to mount on top of this Evaluation board for creating complete PX30.Core EDIMM2.2 Starter Kit. Add support for it. Signed-off-by: NJagan Teki <jagan@amarulasolutions.com> Signed-off-by: NMichael Trimarchi <michael@amarulasolutions.com> Reviewed-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Samuel Holland 提交于
The Rockchip boot ROM expects little-endian values in the image header. When running mkimage on a big-endian machine, these values need to be byteswapped before writing or verifying the header. This change fixes cross-compiling U-Boot SPL for the RK3399 SoC from a big-endian ppc64 host machine. Signed-off-by: NSamuel Holland <samuel@sholland.org> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
-
由 Jagan Teki 提交于
Enable Console multiplexing in ROCKPi N8 which would is required to video out the console buffer. Enable it. Signed-off-by: NJagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
-
由 Jagan Teki 提交于
Like, rk3399 the rk3288 also supports 4K resolution. So, enable it for rk3288 with HDMI platforms. Right now, rockchip video drivers are supporting for rk3288, rk3399 SoC families, so mark the 4K resolution by default if it's an HDMI video out. Signed-off-by: NJagan Teki <jagan@amarulasolutions.com> Cc: Anatolij Gustschin <agust@denx.de> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
-
由 Jagan Teki 提交于
Add chosen node in -u-boot.dtsi for ROCK-Pi N8 board. This will help to get serial out messages. Signed-off-by: NJagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
-
由 Jagan Teki 提交于
Enable Console multiplexing in ROCKPi N10 which would is required to video out the console buffer. Enable it. Signed-off-by: NJagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
-
由 Sean Anderson 提交于
This updates logging documentation with some examples of the new commands added in the previous commits. It also removes some items from the to-do list which have been implemented. Signed-off-by: NSean Anderson <seanga2@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Sean Anderson 提交于
The functions in log.h are already mostly documented, so add them to the generated documentation. Signed-off-by: NSean Anderson <seanga2@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Sean Anderson 提交于
This exercises a few success and failure modes of the log filter-* commands. log filter-list is not tested because it's purely informational. I don't think there's a good way to test it except by testing if the output of the command exactly matches a sample run. Signed-off-by: NSean Anderson <seanga2@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Sean Anderson 提交于
This adds several commands to add, list, and remove log filters. Due to the complexity of adding a filter, `log filter-list` uses options instead of positional arguments. These commands have been added as subcommands to log by using a dash to join the subcommand and subsubcommand. This is stylistic, and they could be converted to proper subsubcommands if it is wished. Signed-off-by: NSean Anderson <seanga2@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Sean Anderson 提交于
A few of these tests were inspired by those in glibc. The syntax for invoking test_getopt is a bit funky, but it's necessary so that the CPP can parse the arguments correctly. Signed-off-by: NSean Anderson <seanga2@gmail.com>
-
由 Sean Anderson 提交于
Some commands can get very unweildy if they have too many positional arguments. Adding options makes them easier to read, remember, and understand. This implementation of getopt has been taken from barebox, which has had option support for quite a while. I have made a few modifications to their version, such as the removal of opterr in favor of a separate getopt_silent function. In addition, I have moved all global variables into struct getopt_context. The getopt from barebox also re-orders the arguments passed to it so that non-options are placed last. This allows users to specify options anywhere. For example, `ls -l foo/ -R` would be re-ordered to `ls -l -R foo/` as getopt parsed the options. However, this feature conflicts with the const argv in cmd_tbl->cmd. This was originally added in 54841ab5 ("Make sure that argv[] argument pointers are not modified."). The reason stated in that commit is that hush requires argv to stay unmodified. Has this situation changed? Barebox also uses hush, and does not have this problem. Perhaps we could use their fix? I have assigned maintenance of getopt to Simon Glass, as it is currently only used by the log command. I would also be fine maintaining it. Signed-off-by: NSean Anderson <seanga2@gmail.com>
-
由 Sean Anderson 提交于
This makes the log level command print all valid log levels. The default log level is annotated. This provides an easy way to see which log levels are compiled-in. Signed-off-by: NSean Anderson <seanga2@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Sean Anderson 提交于
This allows users to query which categories and drivers are available on their system. This allows them to construct filter-add commands without (e.g.) adjusting the log format to show categories and drivers. Signed-off-by: NSean Anderson <seanga2@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-