- 16 1月, 2012 3 次提交
-
-
由 Peter Barada 提交于
This patch adds basic support for OMAP35x/DM37x SOM LV/Torpedo reference boards. It assumes U-boot is loaded to SDRAM with the help of another small bootloader (x-load) running from SRAM. Signed-off-by: NPeter Barada <peter.barada@logicpd.com> Cc: Tom Rini <tom.rini@gmail.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Wolfgang Denk <wd@denx.de> Acked-by: NIgor Grinberg <grinberg@compulab.co.il>
-
由 Jason Liu 提交于
Add the initial support for Freescale i.MX6Q Sabre Lite board Signed-off-by: NDirk Behme <dirk.behme@de.bosch.com> Signed-off-by: NJason Liu <jason.hui@linaro.org> CC: Eric Nelson <eric.nelson@boundarydevices.com>
-
由 Fabio Estevam 提交于
Add initial support for Freescale MX28EVK board. Tested boot via SD card and by loading a kernel via TFTP through the FEC interface. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Acked-by: NMarek Vasut <marek.vasut@gmail.com> Acked-by: NStefano Babic <sbabic@denx.de>
-
- 14 1月, 2012 1 次提交
-
-
由 Stefan Kristiansson 提交于
Signed-off-by: NStefan Kristiansson <stefan.kristiansson@saunalahti.fi>
-
- 10 1月, 2012 2 次提交
-
-
由 Holger Brunck 提交于
This board is similar to our tuxx1 target. But on this board there is only one application specific chip select configured. Signed-off-by: NHolger Brunck <holger.brunck@keymile.com> cc: Valentin Longchamp <valentin.longchamp@keymile.com> Acked-by: NHeiko Schocher <hs@denx.de> Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
由 Holger Brunck 提交于
These boards are from a u-boot point of view identical. So collect the two headerfiles to one, to decrease maintenance. Signed-off-by: NHolger Brunck <holger.brunck@keymile.com> cc: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Heiko Schocher <hs@denx.de> Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
- 24 12月, 2011 3 次提交
-
-
由 Thierry Reding 提交于
The Medcom is a 16:9 15" terminal that is used for patient infotainment in hospitals. Changes in v3: * Remove unused implementation of gpio_config_uart(). * Implement MMC/SD card detection. * Drop board_mmc_getcd() which is now implemented by common Tegra2 code. * Add MAINTAINERS entry. Changes in v2: * No longer override the default CONFIG_SYS_TEXT_BASE setting. Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de> Acked-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Thierry Reding 提交于
The Plutux is a set-top box device based on the Tamonten processor module. It can be connected to a display via an HDMI output. Changes in v3: * Remove unused implementation of gpio_config_uart(). * Implement MMC/SD card detection. * Drop board_mmc_getcd() which is now implemented by common Tegra2 code. * Add MAINTAINERS entry. Changes in v2: * No longer override the default CONFIG_SYS_TEXT_BASE setting. Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de> Acked-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Stefano Babic 提交于
The twister board is a development board using the TAM3517 SOM. Support for NAND, 2 Ethernet (EMAC and SMC911), USB (EHCI_OMAP). Signed-off-by: NStefano Babic <sbabic@denx.de> CC: Tapani Utrianen <tapani@technexion.com> CC: Tom Rini <tom.rini@gmail.com> CC: Sandeep Paulraj <s-paulraj@ti.com>
-
- 10 12月, 2011 3 次提交
-
-
由 Jason Liu 提交于
Add the initial support for Freescale i.MX6Q Armadillo2 board Support: MMC boot from slot 0/1, debug UART(UART4), usdhc. There is two MMC slots on the boards: mmc dev 0 -> connect USDHC3 -> the lower slot on the board, mmc dev 1 -> connect USDHC4 -> the upper slot on the board, Signed-off-by: NJason Liu <jason.hui@linaro.org> Cc: Stefano Babic <sbabic@denx.de> Tested-by: NDirk Behme <dirk.behme@de.bosch.com>
-
由 Chander Kashyap 提交于
As per new naming convention for Samsung SoC's, all Cortex-A9 and Cortex-A15 based SoC's will be classified under the name Exynos. Cortex-A9 and Cortex-A15 based SoC's will be sub-classified as Exynos4 and Exynos5 respectively. In order to better adapt and reuse code across various upcoming Samsung Exynos based boards, all uses of s5pc210 prefix/suffix/directory-names are renamed in this patch. s5pc210 is renamed as exynos4210 and S5PC210/s5pc210 suffix/prefix are renamed as exynos4/EXYNOS4. Signed-off-by: NChander Kashyap <chander.kashyap@linaro.org> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Stephen Warren 提交于
Ventana is a board which is very similar to Seaboard. Support it by re-using board/nvidia/seaboard/seaboard.c with minor run-time conditionals. v5: Makefile: Use cmd_link_o_target, remove unused clean/distclean targets. v6: Make gpio_config_uart_seaboard() static. v7: Add MAINTAINERS entry for Ventana. Tom Warren doesn't have Ventana, so he asked me to add myself for this board. Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
- 09 12月, 2011 3 次提交
-
-
由 Kyle Moffett 提交于
The eXMeritus HWW-1U-1A unit is a DO-160-certified 13lb 1U chassis with 3 independent TEMPEST zones. Two independent P2020 computers may be found inside each zone. Complete hardware support is included. High-level hardware overview: * DO-160 certified for passenger aircraft (noncritical) * TEMPEST ceritified for RED/BLACK separation * 3 zones per chassis, 2 computers per zone (total of 6) * Dual-core 1.066GHz P2020 per computer * One 2GB DDR2 SO-RDIMM module per computer (upgradable to 4GB) * Removable 80GB or 160GB Intel X18-M SSD per computer * Front-accessible dual-port E1000E per computer * Front-accessible serial console per computer * Front-accessible USB port per computer * Internal Gigabit crossover within each TEMPEST zone * Internal unidirectional fiber links across TEMPEST zones * Battery-backed DS1339 I2C RTC on each CPU. Combined, each 13lb 1U chassis contains 12GB RAM, 12 cores @ 1.066GHz, 12 front-accessible Gigabit Ethernet ports and 960GB of solid-state storage with a total power consumption of ~200W. Additional notes: * SPD detection is only known to work with the DO-160-certified DIMMs * CPU reset is a little quirky due to hardware misfeature. Proper support for the hardware reset mechanism has been left for a later patch series to address. Signed-off-by: NKyle Moffett <Kyle.D.Moffett@boeing.com> Cc: Andy Fleming <afleming@gmail.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Wolfgang Denk 提交于
The "rmu" board has long been unmaintained, and is broken. Remove it. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
The BAB7xx boards are almost deceased. They cause build warnings, an it's not worth the effort to fix these. Remove the dead body. Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Frank Gottschling <fgottschling@eltec.de>
-
- 07 12月, 2011 6 次提交
-
-
由 Heiko Schocher 提交于
- booting from NOR Flash with direct boot method - POST support - LOGBUF support Signed-off-by: NHeiko Schocher <hs@denx.de> Cc: Paulraj Sandeep <s-paulraj@ti.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Christian Riesch <christian.riesch@omicron.at>
-
由 Marek Vasut 提交于
The board is unmaintained and maintainer doesn't respond. Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Anatolij Gustschin <agust@denx.de>
-
由 Marek Vasut 提交于
The board is unmaintained and maintainer doesn't respond. Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Anatolij Gustschin <agust@denx.de>
-
由 Tim Schendekehl 提交于
Add support for the Ethernut 5 open hardware design, based on Atmel's AT91SAM9XE512 SoC. V4 - Fix several coding style issues. - Move machine type to config file. - Remove use of CONFIG_ATMEL_LEGACY. Signed-off-by: NTim Schendekehl <tim.schendekehl@egnite.de>
-
由 Simon Guinot 提交于
This patch adds support for the LaCie 2Big Network v2 board, based on the Marvell Kirkwood 6281 SoC. Additional information is available at: http://lacie-nas.org/doku.php?id=2big_network_v2Signed-off-by: NSimon Guinot <simon.guinot@sequanux.org>
-
由 Thomas Weber 提交于
Signed-off-by: NThomas Weber <weber@corscience.de>
-
- 02 12月, 2011 1 次提交
-
-
由 Nobuhiro Iwamatsu 提交于
The ecovec board has SH7724, 256MB DDR2-SDRAM, USB, Ethernet, and more. This patch supports the following functions: - 256MB DDR2-SDRAM - USB - I2C - Ethernet Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
- 01 12月, 2011 1 次提交
-
-
由 Dirk Eibach 提交于
Board support for the Guntermann & Drunck Io64. Signed-off-by: NDirk Eibach <eibach@gdsys.de> Signed-off-by: NStefan Roese <sr@denx.de>
-
- 29 11月, 2011 2 次提交
-
-
由 Ira W. Snyder 提交于
This adds support for the Freescale COM Express P2020 board. This board is similar to the P1_P2_RDB, but has some extra (as well as missing) peripherals. Unlike all other mpc85xx boards, it uses a watchdog timeout to reset. Using the HRESET_REQ register does not work. This board has no NOR flash, and can only be booted via SD or SPI. This procedure is documented in Freescale Document Number AN3659 "Booting from On-Chip ROM (eSDHC or eSPI)." Some alternative documentation is provided in Freescale Document Number P2020RM "P2020 QorIQ Integrated Processor Reference Manual" (section 4.5). Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Stelian Pop 提交于
Change my old email address which is no longer valid. Signed-off-by: NStelian Pop <stelian@popies.net> Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
- 28 11月, 2011 1 次提交
-
-
由 Stelian Pop 提交于
Change my old email address which is no longer valid. Signed-off-by: NStelian Pop <stelian@popies.net> Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
- 17 11月, 2011 1 次提交
-
-
由 Wolfgang Denk 提交于
The last maintainer (Eran Man) cannot be reached any more. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 16 11月, 2011 2 次提交
-
-
由 Sricharan 提交于
This patch adds the minimal support for OMAP5. The platform and machine specific headers and sources updated for OMAP5430. OMAP5430 is Texas Instrument's SOC based on ARM Cortex-A15 SMP architecture. It's a dual core SOC with GIC used for interrupt handling and SCU for cache coherency. Also moved some part of code from the basic platform support that can be made common for OMAP4/5. Rest is kept out seperately. The same approach is followed for clocks and emif support in the subsequent patches. Signed-off-by: Nsricharan <r.sricharan@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Marek Vasut 提交于
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Cc: Robert Schwebel <robert@schwebel.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
-
- 11 11月, 2011 1 次提交
-
-
由 Marek Vasut 提交于
This contains support for the following components: - DUART - MMC - Both FEC interfaces - NAND - I2C (RTC, EEPROM) - SPI (FLASH) Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de>
-
- 10 11月, 2011 2 次提交
-
-
由 Tom Rini 提交于
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: NTom Rini <trini@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Macpaul Lin 提交于
Add ADP-AG101P into MAINTAINERS list. Add ADP-AG101P into boards.cfg. Signed-off-by: NMacpaul Lin <macpaul@andestech.com>
-
- 05 11月, 2011 1 次提交
-
-
由 Michael Jones 提交于
Add support for the MATRIX VISION mvBlueLYNX-X, an OMAP3-based intelligent camera. Signed-off-by: NMichael Jones <michael.jones@matrix-vision.de> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
- 04 11月, 2011 3 次提交
-
-
由 Heiko Schocher 提交于
- DM368 SOC - booting with spl not with UBL from TI - before loading u-boot from NAND into RAM, test the RAM with the post memory test. If error is found, switch all LEDs on and halt system. - SPI Flash Dataflash Typ: M25PE80 - Ethernet DM9161BI - MMC - USB Signed-off-by: NHeiko Schocher <hs@denx.de> Cc: Sandeep Paulraj <s-paulraj@ti.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Helmut Raiger 提交于
This adds basic board support for TT-01 based on the Bluetechnix i.MX31 SOM. Currently only NOR-Flash boot is implemented. Signed-off-by: NHelmut Raiger <helmut.raiger@hale.at> Acked-by: NStefano Babic <sbabic@denx.de>
-
由 Stefano Babic 提交于
The flea3 board is a custom board by CarMediaLab used in automotive. Network (FEC), NOR, NAND and SPI are supported. Signed-off-by: NStefano Babic <sbabic@denx.de>
-
- 28 10月, 2011 3 次提交
-
-
由 Rob Herring 提交于
Add basic support for Calxeda Highbank platform. Only minimal support with serial and SATA are included. Signed-off-by: NJason Hobbs <jason.hobbs@calxeda.com> Signed-off-by: NRob Herring <rob.herring@calxeda.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
-
由 Chandan Nath 提交于
This patch adds basic support for booting the board. This patch adds support for the UART necessary to get to the u-boot prompt. Signed-off-by: NChandan Nath <chandan.nath@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Jason Cooper 提交于
Copied wholeheartedly from board/Marvell/guruplug and modified to add support for SPI NOR flash. CONFIG_MACH_DREAMPLUG defined in include/configs/dreamplug.h until Linus's kernel.org tree adds it to mach-types.h. Once it trickles down, the definition can be removed from include/configs/dreamplug.h. Signed-off-by: NJason Cooper <u-boot@lakedaemon.net>
-
- 23 10月, 2011 1 次提交
-
-
由 Wolfgang Denk 提交于
The board stopped building some time ago, and the board maintainer agrtees to drop it - see http://article.gmane.org/gmane.comp.boot-loaders.u-boot/112674Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Alex Dubov <oakad@yahoo.com> Cc: Andy Fleming <afleming@gmail.com> Cc: Kumar Gala <galak@kernel.crashing.org>
-