- 02 7月, 2015 1 次提交
-
-
由 Jagan Teki 提交于
This commit moves: - CONFIG_SPI_FLASH_BAR from include/configs/*.h into configs/*_defconfigs Signed-off-by: NJagan Teki <jteki@openedev.com>
-
- 26 6月, 2015 1 次提交
-
-
由 Joe Hershberger 提交于
Some archs/boards specify their own default by pre-defining the config which causes the Kconfig system to mix up the order of the configs in the defconfigs... This will cause merge pain if allowed to proliferate. Remove the configs that behave this way from the archs. A few configs still remain, but that is because they only exist as defaults and do not have a proper Kconfig entry. Those appear to be: SPIFLASH DISPLAY_BOARDINFO Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com> [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates, drop DM_USB from MSI_Primo81 as USB_MUSB_SUNXI isn't converted yet to DM] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 02 6月, 2015 1 次提交
-
-
由 Lars Poeschel 提交于
CONFIG_NET_MULTI is not used anywhere and thus can safely be removed from the configs. Acked-by: NMarek Vasut <marex@denx.de> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NLars Poeschel <poeschel@lemonage.de>
-
- 25 2月, 2015 2 次提交
-
-
由 Vladimir Barinov 提交于
Porter is an entry level development board based on R-Car M2 SoC (R8A7791) This commit supports the following peripherals: - SCIF, I2C, Ethernet, QSPI, SD, USB Host Signed-off-by: NVladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Nobuhiro Iwamatsu 提交于
This adds drivers model support of serial port to Silk board, and migrate serial port to drivers model. Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
- 13 2月, 2015 1 次提交
-
-
由 Vladimir Barinov 提交于
SILK is an entry level development board based on R-Car E2 SoC (R8A7794) This commit supports the following peripherals: - SCIF, I2C, Ethernet, QSPI, MMC, USB Host Signed-off-by: NVladimir Barinov <vladimir.barinov@cogentembedded.com> Reviewed-by: NTom Rini <trini@ti.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
- 10 12月, 2014 1 次提交
-
-
由 Nobuhiro Iwamatsu 提交于
Alt board has been connected to eMMC of 8GB to MMC port. This enables MMC port and MMC command. Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
- 05 12月, 2014 1 次提交
-
-
由 Nobuhiro Iwamatsu 提交于
This stops clock except INTC-RT, MSIF, INTC-SYS, IRQC and SCIF before kernel boots. Signed-off-by: NHisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
- 17 11月, 2014 1 次提交
-
-
由 Nobuhiro Iwamatsu 提交于
Common part of config for lager, koelsch, alt and gose board will be able to replace rcar-gen2-common.h. Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
- 10 11月, 2014 3 次提交
-
-
由 Nobuhiro Iwamatsu 提交于
Change clock of SCIF for Alt board is used to external clock. This changes to using external clock. Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Nobuhiro Iwamatsu 提交于
R-Car SoCs of rmobile have same IP of sh-i2c, and have same address. This moves sh-i2c of the address defined to rcar-base.h as common header of R-Car SoCs, and headers of each SoCs. Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Nobuhiro Iwamatsu 提交于
Alt board does not use board_late_init function. This removes this function and define of BOARD_LATE_INIT from config. Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
- 04 11月, 2014 3 次提交
-
-
由 Nobuhiro Iwamatsu 提交于
Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Nobuhiro Iwamatsu 提交于
This adds support for USB commands and USB storage device. Signed-off-by: NYoshiyuki Ito <yoshiyuki.ito.ub@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Nobuhiro Iwamatsu 提交于
If CONFIG_RMOBILE_EXTRAM_BOOT is enabled, U-Boot is booted from External RAM. The default boot address is 0x70000000. Signed-off-by: NHisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
- 31 8月, 2014 1 次提交
-
-
由 Masahiro Yamada 提交于
Becuase the board select menu in arch/arm/Kconfig is too big, move the Rmobile board select menu to rmobile/Kconfig. Consolidate also common settings (CONFIG_SYS_CPU="armv7" and CONFIG_SYS_SOC="rmobile"). Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
-
- 24 7月, 2014 1 次提交
-
-
由 Nobuhiro Iwamatsu 提交于
The alt board has R8A7794, 1GB DDR3-SDRAM, USB, Ethernet, QSPI, MMC, SDHI and more. This commit supports the following functions: - DDR3-SDRAM - SCIF - I2C - Ethernet - QSPI Signed-off-by: NHisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
-
- 21 5月, 2014 7 次提交
-
-
由 Nobuhiro Iwamatsu 提交于
Add CONFIG_SYS_GENERIC_BOARD to use common/board_*.c for koelsch. Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
-
由 Nobuhiro Iwamatsu 提交于
Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
-
由 Nobuhiro Iwamatsu 提交于
Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
-
由 Nobuhiro Iwamatsu 提交于
Koelsch board has USB ports. This add support of USB controller of rmobile. Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
-
由 Nobuhiro Iwamatsu 提交于
This adds CONFIG_SYS_THUMB_BUILD to config, in order to enable optimization of thumb. Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
-
由 Nobuhiro Iwamatsu 提交于
Because do not need these feature to koelsch board, this delete it. Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
-
由 Nobuhiro Iwamatsu 提交于
The define of SCIF register was already defined in rcar-base.h. Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
-
- 28 4月, 2014 2 次提交
-
-
由 Nobuhiro Iwamatsu 提交于
CONFIG_SH_TMU_CLK_FREQ of koelsch is calculated from the external clock. This defines RMOBILE_XTAL_CLK, this updates the calculation of CONFIG_SH_TMU_CLK_FREQ. Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Nobuhiro Iwamatsu 提交于
Koelsch board has NOR-Flash. But user uses SPI-Flash ROM instead of NOR-Flash. This removed the setting of NOR-Flash. Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
- 20 2月, 2014 1 次提交
-
-
由 Masahiro Yamada 提交于
CONFIG_SYS_GBL_DATA_SIZE is not used any more. The size of struct "global_data" is automatically calculated by asm-offsets. (See lib/asm-offsets.c) GENERATED_GBL_DATA_SIZE should be used instead of CONFIG_SYS_GBL_DATA_SIZE. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
- 19 2月, 2014 1 次提交
-
-
由 Masahiro Yamada 提交于
This commit removes platform CONFIG_SYS_HZ definition for the remainders of part1 (commit cdb23792) and part2 (commit f232950f). Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Rob Herring <rob.herring@calxeda.com>
-
- 16 1月, 2014 1 次提交
-
-
由 Nobuhiro Iwamatsu 提交于
This supports SH-QSPI device on koelsch board, and enable booting from SPI flash. Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
- 18 12月, 2013 3 次提交
-
-
由 Nobuhiro Iwamatsu 提交于
Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
-
由 Nobuhiro Iwamatsu 提交于
This supports sh_i2c on koelsch board. Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
-
由 Nobuhiro Iwamatsu 提交于
The koelsch board has one sh-ether device. This supports sh-ether. Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
- 03 12月, 2013 2 次提交
-
-
由 Nobuhiro Iwamatsu 提交于
The koelsch board has R8A7791, 2GB DDR3-SDRAM, USB, Quad SPI, Ethernet, and more. This patch supports the following functions: - DDR3-SDRAM - SCIF Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NHisashi Nakamura <hisashi.nakamura.ak@renesas.com> CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> CC: Albert Aribaud <albert.u.boot@aribaud.net>
-
由 Nobuhiro Iwamatsu 提交于
The lager board has R8A7790, 4GB DDR3-SDRAM, USB, Ethernet, and more. This patch supports the following functions: - DDR3-SDRAM - SCIF Signed-off-by: NKouei Abe <kouei.abe.cp@renesas.com> Signed-off-by: NHisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: NRyo Kataoka <ryo.kataoka.wt@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> CC: Albert Aribaud <albert.u.boot@aribaud.net>
-
- 05 11月, 2013 2 次提交
-
-
由 Rob Herring 提交于
Remove platform CONFIG_SYS_HZ definition for configs a-z*. Signed-off-by: NRob Herring <rob.herring@calxeda.com>
-
由 Rob Herring 提交于
The definitions for CONFIG_SYS_PROMPT are varied with little reason other than to display the board name. Over half the definitions are "==> ", so make this the default. The rest of the boards remain unchanged to avoid breaking any external scripts expecting a certain prompt. Signed-off-by: NRob Herring <rob.herring@calxeda.com> Reviewed-by: NFabio Estevam <fabio.estevam@freescale.com>
-
- 22 10月, 2013 1 次提交
-
-
由 Nobuhiro Iwamatsu 提交于
This changes clock definition of SCIF from CONFIG_SYS_CLK_FREQ to CONFIG_SH_SCIF_CLK_FREQ, and clock definition of TMU from CONFIG_SYS_CLK_FREQ to CONFIG_SH_TMU_CLK_FREQ, Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> CC: Albert Aribaud <albert.u.boot@aribaud.net>
-
- 24 7月, 2013 1 次提交
-
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: NTom Rini <trini@ti.com>
-
- 03 10月, 2012 2 次提交
-
-
由 Nobuhiro Iwamatsu 提交于
armadillo-800eva needs this config. Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Nobuhiro Iwamatsu 提交于
Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-