This commit moves:
- CONFIG_SPI_FLASH_BAR

from include/configs/*.h into configs/*_defconfigs
Signed-off-by: NJagan Teki <jteki@openedev.com>

This sets the default commands Kconfig to match
include/config_cmd_default.h commands in the common/Kconfig and removes
them from include/configs.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
[trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates]
Signed-off-by: NTom Rini <trini@konsulko.com>

With the introduction of the Armada 38x support, its necessary to change
the mvneta ethernet driver init call from always 4 times to a
configurable value. Lets make this init call more flexible by moving
the actually used devices to the config header.

Additionally this patch takes care of the slightly different base
addresses for the ethernet controllers on A38x.
Signed-off-by: NStefan Roese <sr@denx.de>
Tested-by: NKevin Smith <kevin.smith@elecsyscorp.com>
Tested-by: NDirk Eibach <dirk.eibach@gdsys.cc>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>

This way, new MVEBU boards don't need to specifiy the common location
for the SPL linker script.
Signed-off-by: NStefan Roese <sr@denx.de>
Tested-by: NKevin Smith <kevin.smith@elecsyscorp.com>
Tested-by: NDirk Eibach <dirk.eibach@gdsys.cc>

Now that the mach-mvebu directory exists and is used by Armada XP we can
move the mvebu-common files into this directory as well.
Signed-off-by: NStefan Roese <sr@denx.de>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: NKevin Smith <kevin.smith@elecsyscorp.com>
Tested-by: NDirk Eibach <dirk.eibach@gdsys.cc>

Orion5x, Kirkwood and Armada XP platforms come with a single TWSI (I2C) MVTWSI
controller. However, other platforms using MVTWSI may come with more: this is
the case on Allwinner (sunxi) platforms, where up to 4 controllers can be found
on the same chip.
Signed-off-by: NPaul Kocialkowski <contact@paulk.fr>
Acked-by: NHeiko Schocher <hs@denx.de>
Acked-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>

This patch fixes the following compilation warning for maxbcm:

Building maxbcm board...
   text    data     bss     dec     hex filename
 160075    6596   38240  204911   3206f ./u-boot
board/maxbcm/maxbcm.c: In function 'reset_phy':
board/maxbcm/maxbcm.c:68:6: warning: unused variable 'reg' [-Wunused-variable]
  u16 reg;
      ^
board/maxbcm/maxbcm.c:66:6: warning: unused variable 'devadr' [-Wunused-variable]
  u16 devadr = CONFIG_PHY_BASE_ADDR;
      ^

Additionally support Spansion SPI NOR flash is added. With larger SPI device
support via the CONFIG_SPI_FLASH_BAR define.
Signed-off-by: NStefan Roese <sr@denx.de>
Reviewed-by: NLuka Perkov <luka.perkov@sartura.hr>

This patch adds SPL support to the maxbcm MV78460 based board. Including
the fixed DDR configuratrion needed for the DDR training code. And the
the serdes PHY init code.
Signed-off-by: NStefan Roese <sr@denx.de>
Reviewed-by: NLuka Perkov <luka.perkov@sartura.hr>

The maxBCM board is equipped with the Marvell Armada-XP MV78460 SoC. It
integrates an SPI NOR flash and an Marvell 88E6185 switch.
Signed-off-by: NStefan Roese <sr@denx.de>

This patch adds basic support for the Marvell DB-MV784MP-GP evaulation
board. This is the first board that uses the recently created
Armada XP 78460 SoC support.
Signed-off-by: NStefan Roese <sr@denx.de>
Tested-by: NLuka Perkov <luka@openwrt.org>