- 04 6月, 2015 10 次提交
-
-
由 Bin Meng 提交于
It turns out that QEMU x86 emulated graphic card has a built-in option ROM which can be run perfectly with native mode by U-Boot. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
CONFIG_FRAMEBUFFER_SET_VESA_MODE and CONFIG_FRAMEBUFFER_VESA_MODE are not x86-specific, so move them to drivers/video/Kconfig and make them depend on VIDEO_VESA driver. Some cosmetic fixes are applied to the Kconfig help text as well. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
There is no reason to prevent CONFIG_VIDEO_VESA driver working on non-x86 boards, so remove such limitation. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
gd is not referenced in those board files so DECLARE_GLOBAL_DATA_PTR should be removed. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
Document how to build and test U-Boot with QEMU. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
QEMU is much easier for us test booting U-Boot as a coreboot payload than having a real board like chromebook_link. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org> Tested-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
Some x86 boards set CONFIG_NR_DRAM_BANKS to 1, which causes incorrect DRAM size printed when booting from coreboot, like this: CPU: x86, vendor Intel, device 663h DRAM: 636 KiB Using default environment Change it to 8 which should be enough for both coreboot and bare cases, and move it to x86-common.h. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
Now that we have QEMU support, make it the default vendor in the 'make menuconfig' screen. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org> Tested-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
This commit introduces the initial U-Boot support for QEMU x86 targets. U-Boot can boot from coreboot as a payload, or directly without coreboot. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org> Tested-by: NSimon Glass <sjg@chromium.org> Merged in patch 'x86: qemu: Add CMD_NET to qemu-x86_defconfig https://patchwork.ozlabs.org/patch/479745/
-
由 Bin Meng 提交于
pci_hose_phys_to_bus() is needed by several drivers. Move it to pci_common.c to avoid a broken build when CONFIG_DM_PCI is on. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
- 03 6月, 2015 1 次提交
-
-
由 Hannes Schmelzer 提交于
netconsole had become defective over time and cleanups. Because the feature is used very rarely nobody did take notice about this defect. With this patch the resulting syntax error on call will be fixed. Signed-off-by: NHannes Schmelzer <oe5hpm@oevsv.at>
-
- 02 6月, 2015 4 次提交
-
-
由 Lars Poeschel 提交于
CONFIG_NET_MULTI is not used anywhere and thus can safely be removed from the configs. Acked-by: NMarek Vasut <marex@denx.de> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NLars Poeschel <poeschel@lemonage.de>
-
由 Lars Poeschel 提交于
The config for pcm051 still undef'd CONFIG_USE_IRQ. This is not needed any more since it is not defined in the whole include path before. Signed-off-by: NLars Poeschel <poeschel@lemonage.de>
-
git://git.denx.de/u-boot-net由 Tom Rini 提交于
Fixup include/configs/unipher.h to not set CONFIG_LIB_RAND Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Michal Simek 提交于
NET_RANDOM_ETHADDR depends on lib/rand.c. This patch adds dependency to Kconfig to ensure that library is also compiled. Remove the definitions from Blackfin boards' include/configs. Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
- 01 6月, 2015 10 次提交
-
-
由 Joe Hershberger 提交于
This also selects CONFIG_NET for any CONFIG_CMD_NET board. Remove the imx default for CONFIG_NET. This moves the config that was defined by 60296a83 (commands: add more command entries in Kconfig). Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Joe Hershberger 提交于
Another shell scripting command that has not been moved. Moved using tools/moveconfig.py using these settings: CMD_SETEXPR bool n y Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
Commit 76ec988b (net: Remove all calls to net_random_ethaddr()) accidentally deleted CONFIG_TARGET_BCT_BRETTL2=y, and since then bct-brettl2 would not build. Since commit a26cd049 (arch: Make board selection choices optional), Kconfig actually allows such a .config file in which no board is selected, but the build never succeeds. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Masahiro Yamada 提交于
Commit 92ac5208 (net: Remove all references to CONFIG_ETHADDR and friends) accidentally dropped #endif. Since then, gr_ep2s60 could not build. scripts/kconfig/conf --silentoldconfig Kconfig CHK include/config.h GEN include/autoconf.mk In file included from include/config.h:5:0, from ./include/common.h:18: include/configs/gr_ep2s60.h:15:0: error: unterminated #ifndef #ifndef __CONFIG_H__ ^ make[1]: *** [include/autoconf.mk] Error 1 Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
-
由 Nobuhiro Iwamatsu 提交于
This updates r8a7794 QoS to revision 0.31 for ES1 and revision 0.321 for ES2. Signed-off-by: NKouei Abe <kouei.abe.cp@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Nobuhiro Iwamatsu 提交于
This updates r8a7793 QoS to revision 0.311. Signed-off-by: NKouei Abe <kouei.abe.cp@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Nobuhiro Iwamatsu 提交于
This updates r8a7791 QoS to revision 0.411. Signed-off-by: NKouei Abe <kouei.abe.cp@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Nobuhiro Iwamatsu 提交于
This updates r8a7790 QoS to revision 0.973. This commit can changed from KConfig to fit contents of the QoS. Signed-off-by: NKouei Abe <kouei.abe.cp@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Mitsuhiro Kimura 提交于
Ethernet function of Alt board can select normal and B by DIP switch on board. But user need to set not only DIP switch but also pin function. This adds pin function of Ethernet function B. This can select from Kconfig. Signed-off-by: NMitsuhiro Kimura <mitsuhiro.kimura.kc@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
- 31 5月, 2015 13 次提交
-
-
-
-
由 Masahiro Yamada 提交于
The chip select 1 of the NAND controller is available if you want to use, although the pins are shared with UART port 2. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
The register value should be 1, not 4. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
PH1-Pro5 includes a newer version of DDR PHY IP. Some registers have been added to the reserved areas. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
Since commit 92ac5208 (net: Remove all references to CONFIG_ETHADDR and friends), the ethernet device on UniPhier boards is not working because of the incorrect (all-zero) MAC address. Enable CONFIG_NET_RANDOM_ETHADDR to generate the random one. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
One disadvantage of commit a26cd049 (arch: Make board selection choices optional) is that Kconfig could create such an insane .config file that no board is selected. As PH1-Pro4 is the main stream of UniPhier SoC family, rip off the "optional" again in favor of PH1-Pro4 as the default SoC. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
This file is only built for SPL. These ifdef conditionals are unnecessary because UniPhier platform now supports UART on SPL. Show appropriate messages on error. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
Cache coherency for SMP is cared by Linux. In U-Boot, the secondary CPU(s) are just sleeping. Nothing in memory is shared with the primary CPU. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
For the same reason as commit d0c47b3e (serial: UniPhier: use 32 bit register access), use "str" instead of "strb" for the LCR register setting. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
The business for UniPhier Soc family has been transferred from Panasonic Corporation to Socionext Inc. Update the SoC select menu in Kconfig. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
In the Linux coding style, it is recommended to include <linux/io.h> rather than <asm/io.h>. Follow this trend. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
- 29 5月, 2015 2 次提交
-
-
由 Chen-Yu Tsai 提交于
sun8i uses the same PSCI backend as sun6i, without power clamps. Since there is no secure SRAM, the backend is placed at the end of DRAM. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Chen-Yu Tsai 提交于
sun8i can share the PSCI backend with sun6i. Only difference is sun8i does not have CPU power clamp controls. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-