- 07 10月, 2019 3 次提交
-
-
由 Maxime Ripard 提交于
I'm not at bootlin anymore, and my mail address doesn't work any longer. Signed-off-by: NMaxime Ripard <mripard@kernel.org>
-
由 Simon Goldschmidt 提交于
These boards don't have a watchdog enabled in SPL, so make sure CONFIG_SPL_WDT is not enabled. Fixes: commit 6874cb72 ("watchdog: Split WDT from SPL_WDT") Signed-off-by: NSimon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
-
由 Heinrich Schuchardt 提交于
%s/plaforms/platforms/g Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
- 06 10月, 2019 1 次提交
-
-
git://git.denx.de/u-boot-sh由 Tom Rini 提交于
- ARM: dts: rmobile: Restore increase off-on delay on the SD Vcc regulator
-
- 05 10月, 2019 15 次提交
-
-
由 Tom Rini 提交于
- Assorted TI platform fixes - Revert the change that broke environment flag validation - Assorted typo fixes - Assorted Kconfig dependency fixes - Other minor bug fixes
-
https://gitlab.denx.de/u-boot/custodians/u-boot-x86由 Tom Rini 提交于
- dm: core: Correct low cell in ofnode_read_pci_addr() - dm: core: Correct bad cast in ofnode_get_addr_size_index()
-
由 Tom Rini 提交于
This reverts commit 7d477654. The changes here break environment validation and furthermore do not seem to be required. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Adam Ford 提交于
The SPL device tree is missing the entires for gpio1, uart1, usdhc1 and usdhc2. This creates the missing imx6q-logicpd-u-boot.dtsi file which will enable these functions so SPL can properly setup UART, detect microSD card, and startup. Fixes: 8f4691e3 ("ARM: imx6q_logic: With SPL_OF_CONTROL enabled, remove MMC init") Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Ovidiu Panait 提交于
Existing debug output is mixed with the function name: initcall_run_list() initcall: 25263initcall_run_list() (relocated to 425263) Turn it to: initcall_run_list() initcall: 25263 (relocated to 425263) Signed-off-by: NOvidiu Panait <ovpanait@gmail.com>
-
由 Andrius Štikonas 提交于
Signed-off-by: NAndrius Štikonas <andrius@stikonas.eu>
-
由 Tom Rini 提交于
Migrate all of the existing OS support options that are under CONFIG_BOOTM_* to Kconfig. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Roman Stratiienko 提交于
At this point we are using part number sub-command to retrieve UUID of the partition using it's name. e.g.: part number mmc $mmcdev system_a system_a_index part uuid mmc $mmcdev:${system_a_index} system_a_uuid Since 'part uuid' sub-command expects partition index in hex format and 'part number' returns decimal value, 'part uuid' command will provide wrong UUID or fail. Fixes: be683756 ("cmd: part: Add 'number' sub-command") Cc: Dirk Behme <dirk.behme@de.bosch.com> Reported-by: NPontus Fuchs <pontus.fuchs@se.bosch.com> Signed-off-by: NRoman Stratiienko <roman.stratiienko@globallogic.com> Signed-off-by: NEugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by: NTom Rini <trini@konsulko.com> Reviewed-by: NIgor Opaniuk <igor.opaniuk@gmail.com>
-
由 Jean-Jacques Hiblot 提交于
To accommodate the growth of u-boot, we need to shift the location of the secure monitor. Moving it 64kB further. Signed-off-by: NJean-Jacques Hiblot <jjhiblot@ti.com>
-
由 Andrew F. Davis 提交于
On HS devices the access to TRNG is restricted on the non-secure ARM side, disable the node in DT to prevent firewall violations. Signed-off-by: NAndrew F. Davis <afd@ti.com> Reviewed-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 AKASHI Takahiro 提交于
Otherwise, menu_show() will be undefined in bootdelay_process(). Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>
-
由 Ley Foon Tan 提交于
This updates MAINTAINERS and git-mailrc to add me as maintainer for socfpga. Signed-off-by: NLey Foon Tan <ley.foon.tan@intel.com> Acked-by: NMarek Vasut <marex@denx.de>
-
由 Heinrich Schuchardt 提交于
*.pyc files contain compiled Python bytecode. 'make mrproper' should remove them. Removing *.pyc files helps for instance sometimes when running into an error "binman: Unknown entry type 'blob' in node '/binman/blob'". Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Michal Simek 提交于
Trivial fix. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Andrew F. Davis 提交于
The memory allocated to store the FIT image containing SYSFW and board configuration data is statically defined to the largest size expected. This was 269000 bytes but now needs to be grown to 276000 to make room for the signatures attached to the board configuration data on High Security devices. Signed-off-by: NAndrew F. Davis <afd@ti.com>
-
- 03 10月, 2019 2 次提交
-
-
由 Simon Glass 提交于
At present this code passes an fdt_addr_t pointer as a u64 pointer which is not safe, since sizeof(fdt_addr_t) may be 4, e.g. with sandbox. Correct this to avoid a stack corruption problem. Fixes: e679d03b (core: ofnode: Add ofnode_get_addr_size_index) Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> [bmeng: correct one typo in the commit message] Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Simon Glass 提交于
This reads the low cell of the PCI address from the wrong cell. Fix it. Also fix the function that this code came from. Fixes: 9e512045 (dm: core: Add operations on device tree references) Fixes: 4ea5243a (fdt: fix fdtdec_get_pci_addr() for CONFIG_PHYS_64BIT) Signed-off-by: NSimon Glass <sjg@chromium.org> Tested-by: NStephen Warren <swarren@nvidia.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
- 02 10月, 2019 2 次提交
-
-
-
https://gitlab.denx.de/u-boot/custodians/u-boot-x86由 Tom Rini 提交于
- Propagate acpi_rsdp_addr to x86 kernel via boot parameters
-
- 01 10月, 2019 2 次提交
-
-
由 Andy Shevchenko 提交于
This is reincarnation of the U-Boot commit 3469bf42 Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Date: Wed Jan 10 19:40:15 2018 +0200 x86: zImage: Propagate acpi_rsdp_addr to kernel via boot parameters after upstream got eventually the Linux kernel commit e6e094e053af75cbc164e950814d3d084fb1e698 Author: Juergen Gross <jgross@suse.com> Date: Tue Nov 20 08:25:29 2018 +0100 x86/acpi, x86/boot: Take RSDP address from boot params if available Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Matthias Brugger 提交于
When booting through the efi stub, the memory map get's created by reading the dram bank information. Depending on the version of the RPi4 this information changes. Read the device tree to initialize the dram bank data structure. This way the kernel is able to access the whole range of available memory. Signed-off-by: NMatthias Brugger <mbrugger@suse.com>
-
- 30 9月, 2019 5 次提交
-
-
https://gitlab.denx.de/u-boot/custodians/u-boot-atmel由 Tom Rini 提交于
First set of u-boot-atmel fixes for 2019.10 cycle: This includes only tiny cleanups on env changes related to 2019.10 new features: removal of duplicate env settings (otherwise there may be warnings in building..) and a small fix for flashes on Gardena smart gateway (requires nand bad block tables).
-
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip由 Tom Rini 提交于
- Fix efuse read data number for rk3399 - make_fit_atf.py: fix .its generation for a single atf image
-
由 Tudor Ambarus 提交于
'commit a9221f3e ("at91, omap2plus: configs: migrate CONFIG_ENV_ to defconfigs")' migrated CONFIG_ENV_ macros to defconfigs but did not remove the identical redefinition of these macros in include/configs/. Since the duplicated macros have the same value as the ones in defconfigs, no "redefined" warnings were raised. Remove duplicated macros for all sama5 and sam9x5ek boards. While verifying that the removal of the macros from include/configs did not change the same macros in defconfigs, overwrite the old defconfig by saving them with the output from "make arch=ARM savedefconfig". This resulted in the movement of some macros in the defconfig files. Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
-
由 Stefan Roese 提交于
This patch enables the BBT in NAND on the AT91SAM based GARDENA smart Gateway. This is especially important, since the Linux driver also enables this option and uses the BBT table pages. Without setting this option, U-Boot will try to re-use these pages again (e.g. UBI). Signed-off-by: NStefan Roese <sr@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Tom Rini <trini@konsulko.com>
-
由 Marek Vasut 提交于
This patch restores commit c49d0ac3 ("ARM: dts: rmobile: Increase off-on delay on the SD Vcc regulator"), which was accidentally dropped during DT resync in commit 317d13ac ("ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.0"). Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Fixes: 317d13ac ("ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.0")
-
- 28 9月, 2019 2 次提交
-
-
由 Heiko Stuebner 提交于
The commit 619f002d ("rockchip: make_fit_atf.py: fix loadables property set error") fixed the double-loading of the primary atf-image, but didn't take into account that there may be rare atf images with only that main section present. Right now this will result in a broken its due to the loadables section not getting closed correctly, so fix that by adapting the guards around the loop. The guards now protect against 0 segments when the bl31 binary doesn't contain any section and 1 segment when only a core atf section is present. Fixes: 619f002d ("rockchip: make_fit_atf.py: fix loadables property set error") Signed-off-by: NHeiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
-
由 Heiko Stuebner 提交于
Originally the cpuid var the value gets read into was defined as u8 cpuid[RK3399_CPUID_LEN]; hence the sizeof(cpuid) would return the correct the correct number of array elements. With the move to a separate function cpuid becomes a pointer and sizeof(cpuid) hence returns the pointer size - 8 in the arm64 case. We do have the actual id length available as function param so use it for actual amount of bytes to read. Fixes: 04825384 ("rockchip: rk3399: derive ethaddr from cpuid") Signed-off-by: NHeiko Stuebner <heiko@sntech.de> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
-
- 27 9月, 2019 1 次提交
-
-
https://gitlab.denx.de/u-boot/custodians/u-boot-efi由 Tom Rini 提交于
Pull request for UEFI sub-system for v2019.10-rc5 Bug fixes for the SetVariable() boot service.
-
- 25 9月, 2019 4 次提交
-
-
由 Pierre-Jean Texier 提交于
This commit add envtools suppport to CI to verify if there is no build issues. Signed-off-by: NPierre-Jean Texier <pjtexier@koncepto.io> Acked-by: NHeiko Schocher <hs@denx.de> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Pierre-Jean Texier 提交于
Since commit af95f206 ("env: Create a new file for environment functions"), a new header file exists. So, this commit add a missing header file. Fixes: include/env.h:158:1: error: unknown type name ‘ulong’; did you mean ‘long’? ulong env_get_ulong(const char *name, int base, ulong default_val); ^~~~~ long include/env.h:158:49: error: unknown type name ‘ulong’; did you mean ‘long’? ulong env_get_ulong(const char *name, int base, ulong default_val); Signed-off-by: NPierre-Jean Texier <pjtexier@koncepto.io> Tested-by: NJoris Offouga <offougajoris@gmail.com> Tested-by: NHeiko Schocher <hs@denx.de> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Pierre-Jean Texier 提交于
The following error appears: tools/env/fw_env.c:1149:25: error: lvalue required as unary ‘&’ operand rc = write(fd, &ENV_REDUND_OBSOLETE, sizeof(ENV_REDUND_OBSOLETE)); Fixes: d3716dd6 ("env: Rename the redundancy flags") Signed-off-by: NPierre-Jean Texier <pjtexier@koncepto.io> Tested-by: NJoris Offouga <offougajoris@gmail.com> Tested-by: NHeiko Schocher <hs@denx.de> Suggested-by: NHeiko Schocher <hs@denx.de> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Pierre-Jean Texier 提交于
Since commit d3716dd6 ("env: Rename the redundancy flags"), the definitions of ENV_REDUND_OBSOLETE & ENV_REDUND_ACTIVE was moved to env.h. Fixes: tools/env/fw_env.c:122:22: error: ‘ENV_REDUND_ACTIVE’ redeclared as different kind of symbol static unsigned char ENV_REDUND_ACTIVE = 1; ^~~~~~~~~~~~~~~~~ In file included from tools/env/fw_env.c:13: include/env.h:63:2: note: previous definition of ‘ENV_REDUND_ACTIVE’ was here ENV_REDUND_ACTIVE = 1, ^~~~~~~~~~~~~~~~~ tools/env/fw_env.c:127:22: error: ‘ENV_REDUND_OBSOLETE’ redeclared as different kind of symbol static unsigned char ENV_REDUND_OBSOLETE; ^~~~~~~~~~~~~~~~~~~ In file included from tools/env/fw_env.c:13: include/env.h:62:2: note: previous definition of ‘ENV_REDUND_OBSOLETE’ was here ENV_REDUND_OBSOLETE = 0, Signed-off-by: NPierre-Jean Texier <pjtexier@koncepto.io> Tested-by: NJoris Offouga <offougajoris@gmail.com> Tested-by: NHeiko Schocher <hs@denx.de> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
- 24 9月, 2019 3 次提交
-
-
由 Heinrich Schuchardt 提交于
APPEND_WRITE with data length zero is allowable according to the UEFI specification. The EDK2 interpretation of no access attributes is attributes = 0. As the UEFI specification is vague in this respect let's stick to EDK2 here. Fixes: commit 6d2f27c5 ("efi_loader: variable: support APPEND_WRITE") Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
We always have to return via EFI_EXIT() from EFIAPI functions. Coverity reported an unreachable line and a resource leak. Fixes: commit 6d2f27c5 ("efi_loader: variable: support APPEND_WRITE") Reported-by: Coverity Scan CID 253575, CID 184095 Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
Remove outdated TODO for efi_stri_coll(). efi_stri_coll() is already using the Unicode capitalization table. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-