- 18 1月, 2020 1 次提交
-
-
由 Simon Glass 提交于
Move this function out of common.h and into a relevant header file. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 07 1月, 2020 1 次提交
-
-
由 Igor Opaniuk 提交于
Migrate to DM_ETH and remove hardcoded pinmux configuration. Signed-off-by: NIgor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: NOleksandr Suvorov <oleksandr.suvorov@toradex.com>
-
- 03 12月, 2019 1 次提交
-
-
由 Simon Glass 提交于
A number of board function belong in init.h with the others. Move them. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NTom Rini <trini@konsulko.com>
-
- 08 10月, 2019 2 次提交
-
-
由 Ricardo Salveti 提交于
Commit e37ac717 ("Convert to use fsl_esdhc_imx for i.MX platforms") converted FSL_ESDHC to FSL_ESDHC_IMX, but the config check for apalis_imx6 wasn't updated accordantly. Signed-off-by: NRicardo Salveti <ricardo@foundries.io> Reviewed-by: NPeng Fan <peng.fan@nxp.com> Acked-by: NMax Krummenacher <max.krummenacher@toradex.com>
-
由 Ricardo Salveti 提交于
Only one dtb is currently supported, so match with imx6-apalis. Signed-off-by: NRicardo Salveti <ricardo@foundries.io> Reviewed-by: NPeng Fan <peng.fan@nxp.com> Acked-by: NMax Krummenacher <max.krummenacher@toradex.com>
-
- 12 8月, 2019 2 次提交
-
-
由 Simon Glass 提交于
This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: NJoe Hershberger <joe.hershberger@ni.com> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Move env_set() over to the new header file. Acked-by: NJoe Hershberger <joe.hershberger@ni.com> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 23 6月, 2019 1 次提交
-
-
由 Yangbo Lu 提交于
Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: NYangbo Lu <yangbo.lu@nxp.com> Tested-by: NSteffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: NPeng Fan <peng.fan@nxp.com> Reviewed-by: NLukasz Majewski <lukma@denx.de> Reviewed-by: NMartyn Welch <martyn.welch@collabora.com> Acked-by: NJason Liu <Jason.hui.liu@nxp.com>
-
- 11 6月, 2019 1 次提交
-
-
由 Marek Vasut 提交于
Drop the ad-hoc AHCI binding code, this is superseded by CONFIG_DWC_AHSATA_AHCI=y resp. drivers/ata/dwc_ahsata.c Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Max Krummenacher <max.krummenacher@toradex.com> Cc: Stefan Agner <stefan.agner@toradex.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com>
-
- 14 4月, 2019 8 次提交
-
-
由 Stefan Agner 提交于
In case USB serial downloader has been used to load U-Boot start the serial download protocol (SDP) emulation. This allows to download complete images such as Toradex Easy Installer over USB SDP as well. This code uses the boot ROM provided boot information to reliably detect USB serial downloader. Signed-off-by: NStefan Agner <stefan.agner@toradex.com> Acked-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com>
-
由 Max Krummenacher 提交于
If the UART is used in DTE mode the RI and DCD bits in UCR3 become irq enable bits. Both are set to enabled after reset and both likely are pending. Disable the bits also on UARTs not used in the boot loader to prevent an interrupt storm when Linux enables the UART interrupts. Signed-off-by: NMax Krummenacher <max.krummenacher@toradex.com> Acked-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com>
-
由 Max Krummenacher 提交于
In the Linux device tree we use 40Ohm drive strength. So use the same value in U-Boot. Signed-off-by: NMax Krummenacher <max.krummenacher@toradex.com> Acked-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com>
-
由 Marcel Ziswiler 提交于
This doesn't do anything anymore, probably never did. Signed-off-by: NMax Krummenacher <max.krummenacher@toradex.com> Acked-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com>
-
由 Marcel Ziswiler 提交于
Migrate USB to using driver model. Signed-off-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com>
-
由 Marcel Ziswiler 提交于
Migrate MMC and SATA to using driver model. While at it also enable SCSI driver model. Signed-off-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com>
-
由 Marcel Ziswiler 提交于
Migrate I2C to using driver model. Signed-off-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com>
-
由 Marcel Ziswiler 提交于
Migrate GPIOs to using driver model, properly request backlight, Ethernet PHY reset, MMC/SD card detect and USB power GPIOs and also enable SION bit in pin muxing for Apalis, backlight, eMMC reset, Ethernet PHY reset and USB power enable GPIOs. While at it also update copyright year, clean-up/re-order includes, add some comments clarifying ifdef scope and do some White-space clean-up. Signed-off-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com>
-
- 21 2月, 2019 1 次提交
-
-
由 Gerard Salvatella 提交于
U-Boot typically tears down the display controller before handing control over to Linux. On LCD displays disabling pixel clock leads to a fading out effect with vertical/horizontal lines. Make sure to disable back light before booting Linux. Signed-off-by: NGerard Salvatella <gerard.salvatella@toradex.com> Signed-off-by: NPhilippe Schenker <philippe.schenker@toradex.com> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
- 07 5月, 2018 1 次提交
-
-
由 Tom Rini 提交于
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 05 3月, 2018 1 次提交
-
-
由 Masahiro Yamada 提交于
Thomas reported U-Boot failed to build host tools if libfdt-devel package is installed because tools include libfdt headers from /usr/include/ instead of using internal ones. This commit moves the header code: include/libfdt.h -> include/linux/libfdt.h include/libfdt_env.h -> include/linux/libfdt_env.h and replaces include directives: #include <libfdt.h> -> #include <linux/libfdt.h> #include <libfdt_env.h> -> #include <linux/libfdt_env.h> Reported-by: NThomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
- 12 10月, 2017 2 次提交
-
-
由 Diego Dorta 提交于
When building with W=1 errors like the one below is seen: board/freescale/mx6sabresd/mx6sabresd.c:546:5: warning: no previous prototype for ‘overwrite_console’ [-Wmissing-prototypes] int overwrite_console(void) Fix the build warnings by including <input.h>. Signed-off-by: NDiego Dorta <diego.dorta@nxp.com> Reviewed-by: NFabio Estevam <fabio.estevam@nxp.com>
-
由 Fabio Estevam 提交于
There is no need call setup_display() from SPL code, so move it to board_init(), which executes only in U-Boot proper. Reported-by: NStefano Babic <sbabic@denx.de> Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
-
- 20 9月, 2017 1 次提交
-
-
由 Fabio Estevam 提交于
Instead of having every board file to add its own g_dnl_bind_fixup() implementation, move it to the common imx6 SPL code. Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com> Reviewed-by: NŁukasz Majewski <lukma@denx.de>
-
- 28 8月, 2017 1 次提交
-
-
由 Breno Lima 提交于
Since the gpr_init() function is common for boards using MX6S, MX6DL, MX6D, MX6Q and MX6QP processors move it to the soc.c file. Signed-off-by: NBreno Lima <breno.lima@nxp.com> Acked-by: NStefano Babic <sbabic@denx.de> Reviewed-by: NLukasz Majewski <lukma@denx.de> Reviewed-by: NFabio Estevam <fabio.estevam@nxp.com>
-
- 23 8月, 2017 1 次提交
-
-
由 Stefan Agner 提交于
Use a completely independent USB Product ID for SPL. This allows to differentiate a SDP running in SPL and SDP running in a U-Boot which could not read the config block successfully. Signed-off-by: NStefan Agner <stefan.agner@toradex.com> Acked-by: NMax Krummenacher <max.krummenacher@toradex.com> Reviewed-by: NŁukasz Majewski <lukma@denx.de>
-
- 16 8月, 2017 3 次提交
-
-
由 Simon Glass 提交于
We are now using an env_ prefix for environment functions. Rename these two functions for consistency. Also add function comments in common.h. Quite a few places use getenv() in a condition context, provoking a warning from checkpatch. These are fixed up in this patch also. Suggested-by: NWolfgang Denk <wd@denx.de> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
We are now using an env_ prefix for environment functions. Rename setenv() for consistency. Also add function comments in common.h. Suggested-by: NWolfgang Denk <wd@denx.de> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Use the env_save() function directly now that there is only one implementation of saveenv(). Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NWolfgang Denk <wd@denx.de> Reviewed-by: NTom Rini <trini@konsulko.com>
-
- 12 7月, 2017 2 次提交
-
-
由 Stefano Babic 提交于
Change is consistent with other SOCs and it is in preparation for adding SOMs. SOC's related files are moved from cpu/ to mach-imx/<SOC>. This change is also coherent with the structure in kernel. Signed-off-by: NStefano Babic <sbabic@denx.de> CC: Fabio Estevam <fabio.estevam@nxp.com> CC: Akshay Bhat <akshaybhat@timesys.com> CC: Ken Lin <Ken.Lin@advantech.com.tw> CC: Marek Vasut <marek.vasut@gmail.com> CC: Heiko Schocher <hs@denx.de> CC: "Sébastien Szymanski" <sebastien.szymanski@armadeus.com> CC: Christian Gmeiner <christian.gmeiner@gmail.com> CC: Stefan Roese <sr@denx.de> CC: Patrick Bruenn <p.bruenn@beckhoff.com> CC: Troy Kisky <troy.kisky@boundarydevices.com> CC: Nikita Kiryanov <nikita@compulab.co.il> CC: Otavio Salvador <otavio@ossystems.com.br> CC: "Eric Bénard" <eric@eukrea.com> CC: Jagan Teki <jagan@amarulasolutions.com> CC: Ye Li <ye.li@nxp.com> CC: Peng Fan <peng.fan@nxp.com> CC: Adrian Alonso <adrian.alonso@nxp.com> CC: Alison Wang <b18965@freescale.com> CC: Tim Harvey <tharvey@gateworks.com> CC: Martin Donnelly <martin.donnelly@ge.com> CC: Marcin Niestroj <m.niestroj@grinn-global.com> CC: Lukasz Majewski <lukma@denx.de> CC: Adam Ford <aford173@gmail.com> CC: "Albert ARIBAUD (3ADEV)" <albert.aribaud@3adev.fr> CC: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Soeren Moch <smoch@web.de> CC: Richard Hu <richard.hu@technexion.com> CC: Wig Cheng <wig.cheng@technexion.com> CC: Vanessa Maegima <vanessa.maegima@nxp.com> CC: Max Krummenacher <max.krummenacher@toradex.com> CC: Stefan Agner <stefan.agner@toradex.com> CC: Markus Niebel <Markus.Niebel@tq-group.com> CC: Breno Lima <breno.lima@nxp.com> CC: Francesco Montefoschi <francesco.montefoschi@udoo.org> CC: Jaehoon Chung <jh80.chung@samsung.com> CC: Scott Wood <oss@buserror.net> CC: Joe Hershberger <joe.hershberger@ni.com> CC: Anatolij Gustschin <agust@denx.de> CC: Simon Glass <sjg@chromium.org> CC: "Andrew F. Davis" <afd@ti.com> CC: "Łukasz Majewski" <l.majewski@samsung.com> CC: Patrice Chotard <patrice.chotard@st.com> CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> CC: Hans de Goede <hdegoede@redhat.com> CC: Masahiro Yamada <yamada.masahiro@socionext.com> CC: Stephen Warren <swarren@nvidia.com> CC: Andre Przywara <andre.przywara@arm.com> CC: "Álvaro Fernández Rojas" <noltari@gmail.com> CC: York Sun <york.sun@nxp.com> CC: Xiaoliang Yang <xiaoliang.yang@nxp.com> CC: Chen-Yu Tsai <wens@csie.org> CC: George McCollister <george.mccollister@gmail.com> CC: Sven Ebenfeld <sven.ebenfeld@gmail.com> CC: Filip Brozovic <fbrozovic@gmail.com> CC: Petr Kulhavy <brain@jikos.cz> CC: Eric Nelson <eric@nelint.com> CC: Bai Ping <ping.bai@nxp.com> CC: Anson Huang <Anson.Huang@nxp.com> CC: Sanchayan Maity <maitysanchayan@gmail.com> CC: Lokesh Vutla <lokeshvutla@ti.com> CC: Patrick Delaunay <patrick.delaunay@st.com> CC: Gary Bisson <gary.bisson@boundarydevices.com> CC: Alexander Graf <agraf@suse.de> CC: u-boot@lists.denx.de Reviewed-by: NFabio Estevam <fabio.estevam@nxp.com> Reviewed-by: NChristian Gmeiner <christian.gmeiner@gmail.com>
-
由 Simon Glass 提交于
At present CONFIG_CMD_SATA enables the 'sata' command which also brings in SATA support. Some boards may wish to enable SATA without the command. Add a separate CONFIG to permit this. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
- 01 6月, 2017 1 次提交
-
-
由 Simon Glass 提交于
This header includes things that are needed to make driver build. Adjust existing users to include that always, even if other dm/ includes are present Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 12 5月, 2017 1 次提交
-
-
由 Tom Rini 提交于
The variable vga_pads is never referenced, drop. Cc: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: NTom Rini <trini@konsulko.com> Acked-by: NMax Krummenacher <max.krummenacher@toradex.com>
-
- 16 12月, 2016 1 次提交
-
-
由 Max Krummenacher 提交于
This adds board support for the Toradex module family Apalis iMX6. The familiy consists of a module with i.MX6 Dual, i.MX6 Quad with commercial and industrial temperature range. Signed-off-by: NMax Krummenacher <max.krummenacher@toradex.com>
-