- 23 8月, 2016 12 次提交
-
-
由 Joe Hershberger 提交于
Instead of always allocating a huge temporary buffer on the stack and then memcpy()ing the result into the transmit buffer, simply figure out where in the transmit buffer the bytes will belong and write them there directly as each message is built. Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Joe Hershberger 提交于
Much of the information is verbose and derived directly from the environment. Only output in debug mode. This also saves about 300 bytes from the code size. Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Joe Hershberger 提交于
Use the same name throughout the nfs code and use the same member of the union to avoid casts. Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Joe Hershberger 提交于
The buffer is of 32-bit elements, not bytes. Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Joe Hershberger 提交于
Instead of repeating the same large snippet for dealing with attributes it should be shared with a helper function. Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Joe Hershberger 提交于
Fix complaints from checkpatch.pl. Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Joe Hershberger 提交于
The type of the buffer is uint32_t, but the parameter used to size it is referring to bytes. Divide by the size of the array elements. Strictly speaking, this shouldn't be needed at all... It could just be 1 just like the request. Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Joe Hershberger 提交于
The v3 handles can be larger than v2, but that doesn't mean we need a separate buffer. Reuse the same (larger) buffer for both. Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Guillaume GARDET 提交于
This patch enables NFSv3 support. If NFSv2 is available use it as usual. If NFSv2 is not available, but NFSv3 is available, use NFSv3. If NFSv2 and NFSv3 are not available, print an error message since NFSv4 is not supported. Tested on iMX6 sabrelite with 4 Linux NFS servers: * NFSv2 + NFSv3 + NFSv4 server: use NFSv2 protocol * NFSv2 + NFSv3 server: use NFSv2 protocol * NFSv3 + NFSv4 server: use NFSv3 protocol * NFSv3 server: use NFSv3 protocol Signed-off-by: NGuillaume GARDET <guillaume.gardet@free.fr> Cc: Tom Rini <trini@konsulko.com> Cc: joe.hershberger@ni.com Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Joe Hershberger 提交于
Unreferenced, so remove the noise. Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Joe Hershberger 提交于
There is no reason to store the default filename in a separate buffer only to immediately copy it to the main name buffer. Just write it there directly and remove the other buffer. Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Joe Hershberger 提交于
At least on bfin, this "specimen" is actually allocated in the BSS and wastes lots of memory in already tight memory conditions. Also, with the introduction of NFSv3 support, this waste got substantially larger. Just remove it. If a board needs a specific different defragment size, that board can override this setting. Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
-
- 21 8月, 2016 12 次提交
-
-
git://git.denx.de/u-boot-sh由 Tom Rini 提交于
[trini: Drop CMD_BOOTI as it's now on by default on ARM64] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Masahiro Yamada 提交于
'-' is never used in function names. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Alexander Graf 提交于
We were truncating the image offset within the target image to 16 bits which again meant that we were potentially overwriting random memory in the lower 16 bits of the image. This patch casts the offset to a more reasonable 32bits. With this applied, I can successfully see Shell.efi assert because it can't find a protocol it expects to be available. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Vignesh R 提交于
make tags creates a symbolic link called tags to ctags. Remove this file on make mrproper or make distclean. Signed-off-by: NVignesh R <vigneshr@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Andreas Fenkart 提交于
addon 183923d3 MMC/SATA have no erase blocks, only blocks. Hence the warning about erase block alignment might be confusing in such environment. Signed-off-by: NAndreas Fenkart <andreas.fenkart@digitalstrom.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Andreas Fenkart 提交于
For double buffering to work, the target buffer must always be big enough to hold all data. This can only be ensured if buffers are of equal size, otherwise one must be smaller and we risk data loss when copying from the bigger to the smaller buffer. Reviewed-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NAndreas Fenkart <andreas.fenkart@digitalstrom.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Lokesh Vutla 提交于
There is no reason to duplicate code for DRA7xx platforms as there can be Rail grouping. The maximum voltage detection algorithm can still be run on other platforms with no Rail grouping and does not harm as it gives the same result. Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Lokesh Vutla 提交于
gpio_en field is introduced to detect if pmic is controlled by GPIO. Make this field 0 on all TPS659* pmics available on DRA7/OMAP5 based platforms and remove the #ifndefs. Reviewed-by: NKeerthy <j-keerthy@ti.com> Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Stephen Warren 提交于
This prevents capture of command output from terminating early on boards that use a simple prompt (e.g. "=> ") that appears in the middle of command output (e.g. crc32's "... ==> 2fa737e0"). Reported-by: NTom Rini <trini@konsulko.com> Signed-off-by: NStephen Warren <swarren@wwwdotorg.org> Tested-by: NTom Rini <trini@konsulko.com> Reviewed-by: NHeiko Schocher <hs@denx.de>
-
由 James Byrne 提交于
This improves the cread_line() function so that it will correctly process the 'Home', 'End', 'Delete' and arrow key escape sequences produced by various terminal emulators. This makes command line editing a more pleasant experience. The previous code only supported the cursor keys and the 'Home' key, and only for certain terminal emulator configurations. This adds support for the 'End and 'Delete' keys, and recognises a wider range of escape sequences. For example, the left arrow key can be 'ESC O D' instead of 'ESC [ D', and the 'Home' key can be 'ESC [ H', 'ESC O H', 'ESC 1 ~' or 'ESC 7 ~', depending on what terminal emulator you use and how it is configured. Signed-off-by: NJames Byrne <james.byrne@origamienergy.com> Changes for v2 - Explicitly initialize variable to avoid spurious compiler warning. Changes for v3 - Remove unnecessary setting of 'act' to ESC_REJECT (now its default value).
-
由 Steve Rae 提交于
- move bcm23550_w1d to Kconfig - move bcm28155_ap to Kconfig Signed-off-by: NSteve Rae <steve.rae@raedomain.com>
-
由 Steve Rae 提交于
implement Kconfig for the 'fastboot' feature set Signed-off-by: NSteve Rae <steve.rae@raedomain.com>
-
- 20 8月, 2016 16 次提交
-
-
由 Bin Meng 提交于
When typing 'bootefi' from U-Boot shell, nothing outputs. Like other commands, return CMD_RET_USAGE so that it can print help message. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NAlexander Graf <agraf@suse.de>
-
由 Tom Rini 提交于
The 'bootz' command is really only for ARM32 Linux Kernel 'zImage' files but has also been adapted for testing with sandbox. Given that sandbox is a test platform, don't add that logic under DISTRO_DEFAULTS. Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Masahiro Yamada 提交于
This command is used to boot ARM64 Linux. I made DISTRO_DEFAULTS select this option for ARM64 to respect include/config_distro_defaults.h. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
The bootz and booti commands rely on common functionality that is found in common/bootm.c and common/bootm_os.c. They do not however rely on the rest of cmd/bootm.c to be implemented so split them into their own files. Have various Makefiles include the required infrastructure for CONFIG_CMD_BOOT[IZ] as well as CONFIG_CMD_BOOTM. Move the declaration of 'images' over to common/bootm.c. Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Maxime Ripard 提交于
This adds a bunch of unit tests for the "fdt apply" command. They've all been run successfully in the sandbox. However, as you still require an out-of-tree dtc with overlay support, this is disabled by default. Acked-by: NSimon Glass <sjg@chromium.org> Acked-by: NPantelis Antoniou <pantelis.antoniou@konsulko.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Maxime Ripard 提交于
The device tree overlays are a good way to deal with user-modifyable boards or boards with some kind of an expansion mechanism where we can easily plug new board in (like the BBB or the raspberry pi). However, so far, the usual mechanism to deal with it was to have in Linux some driver detecting the expansion boards plugged in and then request these overlays using the firmware interface. That works in most cases, but in some cases, you might want to have the overlays applied before the userspace comes in. Either because the new board requires some kind of an early initialization, or because your root filesystem is accessed through that expansion board. The easiest solution in such a case is to simply have the component before Linux applying that overlay, removing all these drawbacks. Reviewed-by: NStefan Agner <stefan@agner.ch> Acked-by: NPantelis Antoniou <pantelis.antoniou@konsulko.com> Acked-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Maxime Ripard 提交于
The device tree overlays are a good way to deal with user-modifyable boards or boards with some kind of an expansion mechanism where we can easily plug new board in (like the BBB, the Raspberry Pi or the CHIP). Add a new function to merge overlays with a base device tree. Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Maxime Ripard 提交于
Add a function to modify inplace only a portion of a property.. This is especially useful when the property is an array of values, and you want to update one of them without changing the DT size. Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Maxime Ripard 提交于
Add a function to retrieve a writeable property only by the first characters of its name. Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Maxime Ripard 提交于
Add a namelen variant of fdt_path_offset to retrieve the node offset using only a fixed number of characters. Reviewed-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Maxime Ripard 提交于
The function fdt_path_next_seperator had an obvious mispell. Fix it. Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Maxime Ripard 提交于
Add a function to retrieve the highest phandle in a given device tree. Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: NStefan Agner <stefan@agner.ch> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Maxime Ripard 提交于
Implement a macro based on fdt_first_property_offset and fdt_next_property_offset that provides a convenience to iterate over all the properties of a given node. Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Maxime Ripard 提交于
The libfdt overlay support introduces a bunch of new includes and functions. Make sure we are able to build it by adding the needed glue. Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Maxime Ripard 提交于
vsprintf.h doesn't include the stdarg.h file, which means that it relies on the files that include vsprintf.h to include stdarg.h as well. Add an explicit include to avoid build errors when simply including that file. Acked-by: NSimon Glass <sjg@chromium.org> Acked-by: NPantelis Antoniou <pantelis.antoniou@konsulko.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Maxime Ripard 提交于
Having dashes as a separator in the DTB name is a quite common practice. However, the current code to generate objects from DTBs assumes the separator is an underscore, leading to a compilation error when building a device tree with dashes. Replace all the dashes in the DTB name to generate the symbols name, which should solve this issue. Acked-by: NSimon Glass <sjg@chromium.org> Acked-by: NPantelis Antoniou <pantelis.antoniou@konsulko.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-