The mvgbe driver supports DM_ETH so switch these boards to using it.
Signed-off-by: NChris Packham <judge.packham@gmail.com>
Reviewed-by: NStefan Roese <sr@denx.de>
Signed-off-by: NStefan Roese <sr@denx.de>

This board is unmaintained and can be removed. This also allows us to
remove kmp204x-common.h and integrate it in kmp204x.h.
Signed-off-by: NValentin Longchamp <valentin.longchamp@ch.abb.com>
Signed-off-by: NHolger Brunck <holger.brunck@ch.abb.com>
Signed-off-by: NStefan Roese <sr@denx.de>

Signed-off-by: NValentin Longchamp <valentin.longchamp@ch.abb.com>
Signed-off-by: NHolger Brunck <holger.brunck@ch.abb.com>
Signed-off-by: NStefan Roese <sr@denx.de>

Remove the PORTL2 board and all its dependencies as it is no longer
supported by the company.
Signed-off-by: NPascal Linder <pascal.linder@edu.hefr.ch>
Signed-off-by: NHolger Brunck <holger.brunck@ch.abb.com>
Signed-off-by: NStefan Roese <sr@denx.de>

Activate the driver model for the Ethernet interface (RGMII) in the KM
Kirkwood Kconfig file. Additionally, raise the auto negotiation timeout
to eight seconds as more time is required for those boards.
Signed-off-by: NPascal Linder <pascal.linder@edu.hefr.ch>
Signed-off-by: NHolger Brunck <holger.brunck@ch.abb.com>
Signed-off-by: NStefan Roese <sr@denx.de>

Activate the driver model for the serial interface in the KM Kirkwood
Kconfig file. The associated preprocessor definitions could be removed
from the header file. However, the clock of 200 MHz needs to be declared
in the device tree.
Signed-off-by: NPascal Linder <pascal.linder@edu.hefr.ch>
Signed-off-by: NHolger Brunck <holger.brunck@ch.abb.com>
Signed-off-by: NStefan Roese <sr@denx.de>

A typo in the km_kirkwood.h header prevented to undefine the initialization
of the Kirkwood PCIe interface.
Signed-off-by: NPascal Linder <pascal.linder@edu.hefr.ch>
Signed-off-by: NHolger Brunck <holger.brunck@ch.abb.com>
Signed-off-by: NStefan Roese <sr@denx.de>

Remove unused preprocessor definitions and comments of already eliminated
code.

The Ethernet driver configuration is already declared in
arch/arm/mach-kirkwood/include/mach/config.h and, therefore, superfluous.
Signed-off-by: NPascal Linder <pascal.linder@edu.hefr.ch>
Signed-off-by: NHolger Brunck <holger.brunck@ch.abb.com>
Signed-off-by: NStefan Roese <sr@denx.de>

After moving the KM specific configurations to Kconfig, the associated
preprocessor definitions can now be removed in the headers. Moreover, the
whitelist has been adapted correspondingly.
Signed-off-by: NPascal Linder <pascal.linder@edu.hefr.ch>
Signed-off-by: NHolger Brunck <holger.brunck@ch.abb.com>
Signed-off-by: NStefan Roese <sr@denx.de>

To execute the conversion away from board specific header files, Kconfig
menus have been implemented for all KM boards and additionally for those
having an ARM architecture.

For the moment, the preprocessor definitions stay in the headers. The
boolean types, however, needed a modification (#define CONFIG_* 1).

The default configuration files of some boards required an update in order
to not change the currently defined values of the configurations.
Signed-off-by: NPascal Linder <pascal.linder@edu.hefr.ch>
Signed-off-by: NHolger Brunck <holger.brunck@ch.abb.com>
Signed-off-by: NStefan Roese <sr@denx.de>

- R8A77980 V3H support

- DaVinci USB updates
- Various OHCI fixes
- Gadget fixes

- Enable SD slot on Intel Edison
- Populate CSRT ACPI table for shared DMA controller on Intel Tangier
- Convert Intel ICH-SPI driver to use new spi-mem ops
- Enable config_distro_bootcmd for QEMU x86
- Support U-Boot as a payload for Intel Slim Bootloader
- Avoid writing temporary asl files into the source tree which fixes the
  parallel build issue occasionally seen

Add board code for the R8A77980 V3H Condor board.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

Add a few bits of platform code to support R8A77980 V3H SoC.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

Import R8A77980 V3H DTs and headers from Linux 5.2.7 , commit 5697a9d3d55f.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

Import R8A77980 V3H clock tables from Linux 5.2.7 , commit 5697a9d3d55f.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

Import R8A77980 V3H PFC tables from Linux 5.2.7 , commit 5697a9d3d55f.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

Fix various type warnings when building this driver for 64bit machine.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

The R8A77980 V3H gether needs a few minor adjustments to the sh_eth
driver, add them to support ethernet on R8A77980.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

Remove obsolete legacy usbboot wrapper, as distroboot can handle
booting from USB drivers.
Signed-off-by: NIgor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: NOleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: NTom Warren <twarren@nvidia.com>

Support the V1.2 hardware revision with the following pin muxing
changes:

Ddc_scl_pv4 and ddc_sda_pv5 previously used as Apalis GPIO3 and GPIO4
are now used as DDC pins.

Gen2_i2c_scl_pt5 and gen2_i2c_sda_pt6 previously used as DDC pins are
now used as USB power enable signals.

Usb_vbus_en0_pn4 and usb_vbus_en1_pn5 previously used as USB power
enable signals are now used as GPIO3 and GPIO4.

Additionally a new device tree file tegra124-apalis-v1.2-eval.dtb is
loaded on V1.2 and later modules and resp. USB power enable signals
activated.
Signed-off-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: NIgor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: NTom Warren <twarren@nvidia.com>

When mainline kernels reboot TK1 they use SW_RESET,
that reset mode does not reset PMIC. Some rails
need to be off for RAM Re-repair to work correctly.
Reviewed-by: NOleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: NDominik Sliwa <dominik.sliwa@toradex.com>
Signed-off-by: NIgor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: NTom Warren <twarren@nvidia.com>

Remove video=tegrafb0:640x480-16@60 aka VESA VGA mode from vidargs in
order for the panel specification in the device tree to be used. This
causes the default to be the 10.1" LVDS display which will be available
in the Toradex webshop shortly.
Reviewed-by: NOleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: NIgor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: NTom Warren <twarren@nvidia.com>

Display proper reset reason after the SoC info.
Signed-off-by: NDominik Sliwa <dominik.sliwa@toradex.com>
Signed-off-by: NIgor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: NOleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: NTom Warren <twarren@nvidia.com>

Switch to the generic compressed Kernel image type (zImage) instead of
the U-Boot specific uImage format.
Reviewed-by: NOleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: NBhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Signed-off-by: NIgor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: NTom Warren <twarren@nvidia.com>

Disabling ASPM fixes incompatibilities with some PCIe cards
Reviewed-by: NOleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: NDominik Sliwa <dominik.sliwa@toradex.com>
Signed-off-by: NIgor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: NTom Warren <twarren@nvidia.com>

Let the kernel print some debug messages when a user program
crashes due to an exception.
Signed-off-by: NStefan Agner <stefan.agner@toradex.com>
Signed-off-by: NIgor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: NOleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: NTom Warren <twarren@nvidia.com>

Use unified values for USB Product/Vendor numbers
when the config block is missing
Reviewed-by: NOleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: NMax Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: NIgor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: NTom Warren <twarren@nvidia.com>

Make sure the Apalis GPIO 8 aka FAN_EN is on when using Apalis TK1
modules.
Reviewed-by: NOleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: NIgor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: NDominik Sliwa <dominik.sliwa@toradex.com>
Signed-off-by: NTom Warren <twarren@nvidia.com>

By keeping RESET_MOCI_CTRL low we avoid explicitly releasing
RESET_MOCI#.

Please note that module hardware versions up to V1.1A will already
release RESET_MOCI# in hardware coming out of reset.

Please further note that with this change the USB hub on the Apalis
Evaluation board is kept in reset in U-Boot and therefore none of its
ports are operational in U-Boot.
Reviewed-by: NOleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: NIgor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: NTom Warren <twarren@nvidia.com>

We never really added a sensible DFU configuration for platforms
based on eMMC. Most of the things one might want to do can also be done
with UMS or fastboot, so drop the DFU configuration.
Signed-off-by: NIgor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: NPhilippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: NTom Warren <twarren@nvidia.com>

This is a configuration option specific to the tegra controller.

Doing it this way makes it show up directly under the tegra controller
option, indented one level, as "Disable external clock loopback".

The way it is now, it shows up at the end of the controller list, not
indented, as if it's some kind of generic MMC configuration option.

Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Tom Warren <twarren@nvidia.com>
Signed-off-by: NTrent Piepho <tpiepho@impinj.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Acked-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: NTom Warren <twarren@nvidia.com>

For U-Boot we allow a GPIO to be specified to enable the codec. Add this
to the relevant binding files.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NTom Warren <twarren@nvidia.com>

This file was missed when adding the sound driver to U-Boot. Bring it in
from Linux 5.0.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Acked-by: NJon Hunter <jonathanh@nvidia.com>
Signed-off-by: NTom Warren <twarren@nvidia.com>

This file was missed when adding the sound driver to U-Boot. Bring it in
from Linux 5.0.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NTom Warren <twarren@nvidia.com>

The setting up MTRRs have already been done in previous
Slim Bootloader stages.
Signed-off-by: NAiden Park <aiden.park@intel.com>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: NBin Meng <bmeng.cn@gmail.com>

Add slimbootloader board to run U-boot as a Slim Bootloader payload
- Add new board/intel/slimbootloader directory with minimum codes
- Add slimbootloader configuration files
- Add doc/board/intel/slimbootloader.rst
Signed-off-by: NAiden Park <aiden.park@intel.com>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: NBin Meng <bmeng.cn@gmail.com>
[bmeng: add slimbootloader board MAINTAINERS file]
Signed-off-by: NBin Meng <bmeng.cn@gmail.com>

Add a new device tree which has very minimum nodes
- x86 reset
- x86 tsc_timer
- x86 pci
- Slim Bootloader serial
Signed-off-by: NAiden Park <aiden.park@intel.com>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: NBin Meng <bmeng.cn@gmail.com>