Signed-off-by: NFeng Kan <fkan@amcc.com>
Signed-off-by: NStefan Roese <sr@denx.de>

Signed-off-by: NFeng Kan <fkan@amcc.com>
Signed-off-by: NStefan Roese <sr@denx.de>

Signed-off-by: NWolfgang Denk <wd@denx.de>

Signed-off-by: NKim Phillips <kim.phillips@freescale.com>

This patch fixes a potentially serious issue related to USB which was
discouvered by Martin Krause <martin.krause@tqs.de> and fixed for
ARM920T. Martin wrote:

  Turn off USB to prevent the host controller from writing to the
  SDRAM while Linux is booting. This could happen, because the HCCA
  (Host Controller Communication Area) lies within the SDRAM and the
  host controller writes continously to this area (as busmaster!), for
  example to increase the HccaFrameNumber variable, which happens
  every 1 ms.

This is a slightly modified version of the patch in order to shutdown
USB when booting on all architectures.
Signed-off-by: NMarkus Klotzbuecher <mk@denx.de>

ADS5121 Rev 3 board is now the default config

config targets are now

ads5121_config
    Rev 3 board with
	PCI
	M41T62 on board RTC
	512MB DRAM

ads5121_rev2_config
    Rev 2 board with
	No PCI
	256MB DRAM
Signed-off-by: NMartha Marx <mmarx@silicontkx.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NJohn Rigby <jrigby@freescale.com>

Consolidate ADS5121 IO Pin configuration to one file
board/ads5121/iopin.c.

Remove pin config from cpu/mpc512x/fec.c
Signed-off-by: NMartha Marx <mmarx@silicontkx.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NJohn Rigby <jrigby@freescale.com>

Only print partition for selected device if user supplied the <dev>
arg with the "usb part [dev]" command.
Signed-off-by: NChristian Eggers <ceggers@gmx.de>
Acked-by: NMarkus Klotzbuecher <mk@denx.de>

This patch fixes bugs in usbdcore*.c related to the use of devices
with multiple configurations.

The original code made mistakes about the meaning of configuration value and
configuration index, and the resulting off-by-one errors resulted in:

* SET_CONFIGURATION always selected the first configuration, no matter what
  wValue is being passed.
* GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first
  configuration (index 0).
Signed-off-by: NHarald Welte <laforge@openmoko.org>
Acked-by: NMarkus Klotzbuecher <mk@denx.de>

Signed-off-by: NWolfgang Denk <wd@denx.de>

Only print partition for selected device if user supplied the <dev>
arg with the "usb part [dev]" command.
Signed-off-by: NChristian Eggers <ceggers@gmx.de>
Acked-by: NMarkus Klotzbuecher <mk@denx.de>

This patch fixes bugs in usbdcore*.c related to the use of devices
with multiple configurations.

The original code made mistakes about the meaning of configuration value and
configuration index, and the resulting off-by-one errors resulted in:

* SET_CONFIGURATION always selected the first configuration, no matter what
  wValue is being passed.
* GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first
  configuration (index 0).
Signed-off-by: NHarald Welte <laforge@openmoko.org>
Acked-by: NMarkus Klotzbuecher <mk@denx.de>

This patch fixes NAND related printf format warning. Those warnings are
now visible since patch dc4b0b38
[Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is
really helpful.
Signed-off-by: NStefan Roese <sr@denx.de>

Signed-off-by: NStefan Roese <sr@denx.de>

This patch moves the check, if a device should be skipped in PCI PNP
configuration into the function pci_skip_dev(). This function is defined
as weak so that it can be overwritten by a platform specific one if
needed. The check if the device should get printed in the PCI summary upon
bootup (when CONFIG_PCI_SCAN_SHOW is defined) is moved to the function
pci_print_dev() which is also defined as weak too.
Signed-off-by: NStefan Roese <sr@denx.de>

This patch fixes ppc4xx related printf format warning. Those warnings are
now visible since patch dc4b0b38
[Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is
really helpful.
Signed-off-by: NStefan Roese <sr@denx.de>

Newer PPC's like 440SPe, 460EX/GT can be equipped with more than 2GB of SDRAM.
To support such configurations, we "only" map the first 2GB via the TLB's. We
need some free virtual address space for the remaining peripherals like, SoC
devices, FLASH etc.

Note that ECC is currently not supported on configurations with more than 2GB
SDRAM. This is because we only map the first 2GB on such systems, and therefore
the ECC parity byte of the remaining area can't be written.
Signed-off-by: NStefan Roese <sr@denx.de>

Signed-off-by: NLarry Johnson <lrj@acm.org>
Signed-off-by: NStefan Roese <sr@denx.de>

Signed-off-by: NLarry Johnson <lrj@acm.org>
Signed-off-by: NStefan Roese <sr@denx.de>

Signed-off-by: NWolfgang Denk <wd@denx.de>

This PCI-X e1000 variant works by just adding in the correct
PCI IDs in the appropriate places.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

(introduced by commit 391fd93a)

This patch makes SPARC targets build again. It is caused by
phys_addr_t and phys_size_t being defined in the wrong header
file. include/lmb.h need those typedefs to build.
Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>

Signed-off-by: NMarcel Ziswiler <marcel@ziswiler.com>

Signed-off-by: NMarcel Ziswiler <marcel@ziswiler.com>

Round the serial port clock divisor value returned by
calc_divisor().
Signed-off-by: NHugo Villeneuve <hugo.villeneuve@lyrtech.com>
Signed-off-by: NJohn Roberts <john.roberts@pwav.com>

Some macros such as NAND_CTL_SETALE conflict between current and legacy
NAND, being defined by the subsystem in the former case and the board
config file in the latter.
Signed-off-by: NScott Wood <scottwood@freescale.com>

ARM: Fix for incorrect version of patch applied when
adding support for the Lyrtech SFF-SDR board.
Signed-off-by: NHugo Villeneuve <hugo.villeneuve@lyrtech.com>
Signed-off-by: NPhilip Balister, OpenSDR <philip@opensdr.com>

Remove useless print message at apollon
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

The LMB code now uses phys_addr_t and phys_size_t.  Also, there were a couple
of casting problems in the bootm code that called the LMB functions.
Signed-off-by: NAndy Fleming <afleming@freescale.com>

gcc-4.3.x generates the following:

bootm.c: In function 'do_bootm_linux':
bootm.c:208: warning: cast from pointer to integer of different size
bootm.c:215: warning: cast from pointer to integer of different size
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

common/env_common.c (default_env): new function that resets the environment to
		    the default value
common/env_common.c (env_relocate): use default_env instead of own copy
common/env_nand.c (env_relocate_spec): use default_env instead of own copy
include/environment.h: added default_env prototype
Signed-off-by: NWerner Almesberger <werner@openmoko.org>
Signed-off-by: NHarald Welte <laforge@openmoko.org>

The writeenv() and readenv() calls introduced by the recently added bad block
management for environment variables were missing casts therefore producing
compile time warnings.
While at it fixing some typo in a comment and indentation.
Signed-off-by: NMarcel Ziswiler <marcel@ziswiler.com>
Signed-off-by: NScott Wood <scottwood@freescale.com>

This is particularly problematic now that non-NAND-specific code is
including <nand.h>, and thus all debugging code is being compiled
regardless of whether it was requested, as reported by Scott McNutt
<smcnutt@psyent.com>.
Signed-off-by: NScott Wood <scottwood@freescale.com>