Enabling this driver requires some DT changes.
Adding DCC to root or main bus:
dcc: dcc {
	compatible = "arm,dcc";
	u-boot,dm-pre-reloc;
};

Extend alias list to link DCC:
	serial0 = &uart0;
	serial1 = &uart1;
	serial2 = &dcc;

Change stdout-path to point to dcc port.
	stdout-path = "serial2:115200n8";

Also add support for debug uart to help with early debug.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Provide user option to skip SPL signature verification for cases where
u-boot is build with SPL support but full U-Boot is also verified
without SPL.

If you want to support this feature please add env__spl_skipped = True
to your boardenv configuration file.

For example Xilinx Zynq is using this feature where the same U-Boot
binary is checked with SPL and without SPL(with FSBL).
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

A patman series with a 'Series-notes' section causes
buildman to crash with:

    self.series.notes += self.section
    TypeError: cannot concatenate 'str' and 'list' objects

Fix by initializing series.notes as a one-element array
rather than a scalar.
Signed-off-by: NAlbert ARIBAUD <albert.u.boot@aribaud.net>
Acked-by: NSimon Glass <sjg@chromium.org>
Tested-by: NSimon Glass <sjg@chromium.org>

These two properties are necessary for SPL to get clocks from DT.

Note:
For now, only clock look-up by index is supported (clk_get_by_index()
function), so "clock-names" is never parsed in U-Boot.  However, we
may want to support something like clk_get_by_name() in the future,
so let's keep "clock-names" as well as "clocks".
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

fdtgrep requires /chosen node to be specified or at least more nodes which
stays in DTS to generate output.
Error message:
./tools/fdtgrep -b u-boot,dm-pre-reloc -RT dts/dt.dtb -n /chosen -O
dtb | ./tools/fdtgrep -r -O dtb - -o spl/u-boot-spl.dtb -P pinctrl-0 -P
pinctrl-names -P clocks -P clock-names -P interrupt-parent
Error: FDT_ERR_BADMAGIC

This patch add empty chosen node to keep fdtgrep happy and pass
compilation for in tree DTS file.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Fix print message to show full 64bit addresses.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Remove ARM Debug communication channel driver from the list
of not converted drivers to DM.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Scrolling the simple framebuffer is really slow in Raspberry Pi to the
point it delays the boot by a second or two and makes longer output
inconvenient to follow (printenv, md).
Signed-off-by: NLubomir Rintel <lkundrak@v3.sk>
Acked-by: NStephen Warren <swarren@wwwdotorg.org>

Gets propagated into the device tree and then into /proc/cpuinfo where
users often expect it.
Signed-off-by: NLubomir Rintel <lkundrak@v3.sk>
Tested-by: NStephen Warren <swarren@wwwdotorg.org>
Reviewed-by: NStephen Warren <swarren@wwwdotorg.org>

Fix spelling errors in the "booti" help text and bring it more
in line with the bootm/bootz help texts.
Signed-off-by: NKarsten Merker <merker@debian.org>

Since commit 87da2690
"openrisc: updating build tools naming convention", openrisc
kernel.org toolchain is out of date and cannot build U-Boot.
Update buildman and moveconfig tools to refer to the new one.
Signed-off-by: NBin Meng <bmeng.cn@gmail.com>

The following maintainers' email addresses are no longer valid.

vipin.kumar@st.com
martin.krause@tq-systems.de
kim.phillips@freescale.com
fgretief@spaceteq.co.za

Update status of the components they used to maintain to be:
S: Orphaned (Since 2016-02)
Signed-off-by: NBin Meng <bmeng.cn@gmail.com>

Commit 755324 (configs: Use config_distro_defaults.h in ti_armv7_common.h)
made ti_armv7_common.h include config_distro_defaults.h. This breaks the
bootdelay feature in cm_t43 because now the
  - #include ti_armv7_common.h (#define CONFIG_BOOTDELAY 1)
  - #undef CONFIG_BOOTDELAY
  - #include config_distro_defaults.h (#define CONFIG_BOOTDELAY 2)
dance in cm_t43.h is no longer valid and in fact leads to CONFIG_BOOTDELAY
not being defined.

Adapt the config file to the new inclusion hierarchy.

Cc: Tom Rini <trini@konsulko.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: NTom Rini <trini@konsulko.com>

Update U-Boot offset and size for raw mmc boot.

Cc: Tom Rini <trini@konsulko.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: NTom Rini <trini@konsulko.com>

During boot, U-Boot raises the CPU frequency but the CORE and MPU regulators
are not updated. This is not a problem in cold boot since the default values
that the pmic outputs are correct, but if Linux were to switch the module to a
low power OPP, the new voltage values will be retained after a reboot and the
module will likely hang once U-Boot raises the CPU frequency back up.

Set both CORE and MPU regulators to to 1.1V on boot.

Cc: Tom Rini <trini@konsulko.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: NTom Rini <trini@konsulko.com>

CM-T43 does not have a vtt regulator. Remove the function that's supposed
to enable it.

Cc: Tom Rini <trini@konsulko.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: NTom Rini <trini@konsulko.com>

Set TPS65218 FSEAL bit to 1 so that RTC could be powered using on-board
3V battery. This is necessary so that time and date will survive reboots and
power offs.

Cc: Tom Rini <trini@konsulko.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: NTom Rini <trini@konsulko.com>

Add the following functions:
tps65218_reg_read() for accessing redisters
tps65218_toggle_fseal() for toggling the fseal bit
tps65218_lock_fsea() for locking the fseal bit to 1

Add the following defines:
All status register bits

Cc: Tom Rini <trini@konsulko.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: NTom Rini <trini@konsulko.com>

Simplify the board file by splitting it to spl portion and u-boot portion.
Some unnecessary includes were identified and removed. No functional changes.

Cc: Tom Rini <trini@konsulko.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: NTom Rini <trini@konsulko.com>

Define prompt for cm-t43.

Cc: Tom Rini <trini@konsulko.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: NTom Rini <trini@konsulko.com>

Add full support for SPI flash chips to future-proof U-Boot for cm-t43.

Cc: Tom Rini <trini@konsulko.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: NTom Rini <trini@konsulko.com>

Move CONFIG_DM_SERIAL to cm_t43_defconfig. This forces us to update the
CONFIG_SYS_NS16550_REG_SIZE value for SPL.

Cc: Tom Rini <trini@konsulko.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: NTom Rini <trini@konsulko.com>

spl_board_init() is necessary for boot. Remove the #undef that keeps
it out of the boot sequence.

Cc: Tom Rini <trini@konsulko.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: NTom Rini <trini@konsulko.com>

- fixup typo
- fixup identation
Signed-off-by: NHannes Schmelzer <oe5hpm@oevsv.at>
Reviewed-by: NTom Rini <trini@konsulko.com>

bur_am335x_common.h today holds all common configuration which is shared
over all B&R boards.

In future we want to bring up boards which are not based on AM335x only
but we still want to have common configuration over all B&R boards
independent from their architecture.

To prepare this we introduce a new file "bur_cfg_common.h", where we
move all common things, which are not architecture specific, from
bur_am335x_common.h.

On B&R am335x boards we include from now:

#include <configs/bur_cfg_common.h>
#include <configs/bur_am335x_common.h>

On other B&R boards, we include only
#include <configs/bur_cfg_common.h>
Signed-off-by: NHannes Schmelzer <oe5hpm@oevsv.at>
Reviewed-by: NTom Rini <trini@konsulko.com>

We drop everything possible things from board headerfiles and replace
this functionality with responsible settings in Kconfig (_defconfig).
Signed-off-by: NHannes Schmelzer <oe5hpm@oevsv.at>
Reviewed-by: NTom Rini <trini@konsulko.com>

There is no need to have some specific prompt, so we drop this within
defconfigs.
Signed-off-by: NHannes Schmelzer <oe5hpm@oevsv.at>
Reviewed-by: NTom Rini <trini@konsulko.com>

During very early prototype-phase we did boot the AM335x boards
initially from CPSW-EMAC.

Now we don't need this feature anymore.

So we drop it to save MLO-space and having therefore a more quickly
boot.
Signed-off-by: NHannes Schmelzer <oe5hpm@oevsv.at>
Reviewed-by: NTom Rini <trini@konsulko.com>

Logic PD makes four different system on modules.  This patch will auto
detect the board type and identify the corresponding device tree image.

V2:
Added 'default:' case to switch statement
Since board_late_init() is defined as int, we now return 0
Signed-off-by: NDerald Woods <woods.technical@gmail.com>
Signed-off-by: NAdam Ford <aford173@gmail.com>

check for U-Boot SPL signature only if SPL really has a serial output.
So check if CONFIG_SPL_SERIAL_SUPPORT is active in board config.
Signed-off-by: NHeiko Schocher <hs@denx.de>
Tested-by: NStephen Warren <swarren@nvidia.com>
Reviewed-by: NStephen Warren <swarren@nvidia.com>

Building pci_rom.c with my toolchain complains about may be used uninitialized
rom varaible:

---8<---
+drivers/pci/pci_rom.c:269:25: note: 'rom' was declared here
w+drivers/pci/pci_rom.c: In function 'dm_pci_run_vga_bios':
w+drivers/pci/pci_rom.c:154:14: warning: 'rom' may be used uninitialized in this function [-Wmaybe-uninitialized]
--->8---

Fix this as done in 55616b86 the ram variable.
Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
Acked-by: NAnatolij Gustschin <agust@denx.de>

Compiling the mkorigenspl tool on darwin complains about undefined ulong. Fix
this by using the unified way.
Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>

Since OpenSSL is deprecated on OS X in favour of Common Crypto API disable the
warning for this host OS.

Another solution would be to add some glue layer for crypto stuff, but I think
this is not worth the effort.
Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

To follow the MIPS 32-bit and 64-bit memory map conventions (*) recent
MIPS Linux kernels are using a 64-bit sign extended value
(0xffffffff80010000) for the 32-bit load address (0x80010000) of the
Creator CI20 board kernel.  When this 64-bit argument was passed to
mkimage running on a 32-bit machine such as the Creator CI20 board the
load address was incorrectly formed from the upper 32-bit sign-extend
bits (0xffffffff) by the strtoul instead of from the lower 32-bits
(0x80010000).  The mkimage should be able to tolerate the longer
sign-extended 64-bit version of the 32-bit arguments with the use of
strtoull.  Use of the strtoll in place of the strtol in mkimage.c
resolves the issue of self hosted kernel builds for the Creator CI20
board (+) and (++).

(*) http://techpubs.sgi.com/library/dynaweb_docs/0620/SGI_Developer/books/DevDriver_PG/sgi_html/ch01.html
(+) https://github.com/MIPS/CI20_linux/issues/23
(++) https://github.com/MIPS/CI20_linux/issues/22Signed-off-by: NWilliam Cohen <wcohen@redhat.com>

This patch adds support for stm32f7 family & stm32f746 board.
Signed-off-by: NVikas Manocha <vikas.manocha@st.com>

This patch adds support for stm32f7 family usart peripheral.
Signed-off-by: NVikas Manocha <vikas.manocha@st.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>