Instead of referenceing the source webpage (which can change) include
the license in the source file.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
Reported-by: NIgor Grinberg <grinberg@compulab.co.il>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Acked-by: NWolfgang Denk <wd@denx.de>

Due to grown code sizes the TQM85xx boards don't build any more with
some older tool chains (like ELDK 4.2).  As these boards have long
reached EOL it seems a waste of effort trying to fix them.  The vendor
has agreed to drop support for them, too.  So let's get rid of them.
Signed-off-by: NWolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
cc: Kim Phillips <kim.phillips@freescale.com>
Acked-by: NStefan Roese <sr@denx.de>

The wrong value was set as value of column of DDR memory for ap_sh4a_4a.
10 is the right value. This fixed this problem.
Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>

Add minimal support for Altera's SOCFPGA Cyclone 5 hardware.
Signed-off-by: NDinh Nguyen <dinguyen@altera.com>
Signed-off-by: NChin Liang See <clsee@altera.com>
Signed-off-by: NPavel Machek <pavel@denx.de>
Reviewed-by: NMarek Vasut <marex@denx.de>
Acked-by: NTom Trini <trini@ti.com>
Cc: Wolfgang Denx <wd@denx.de>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Stefan Roese <sr@denx.de>
----
v8: Remove no_return attribute for reset_cpu

Based on v2012.10-rc2

Without usb-serial cable plugged at this stage, some
garbage is seen in UART RX FIFO, which blocks autoboot
progress. The fix makes sure to empty the RX FIFO,
before we wait for user input to interrupt autoboot.
Signed-off-by: NRamesh Chandrasekaran <ramesh.chandrasekaran@stericsson.com>

Add support for Xilinx Zynq board.
Signed-off-by: NMichal Simek <monstr@monstr.eu>
Acked-by: NMarek Vasut <marex@denx.de>
CC: Joe Hershberger <joe.hershberger@gmail.com>

Add timer driver.
Signed-off-by: NMichal Simek <monstr@monstr.eu>
CC: Joe Hershberger <joe.hershberger@gmail.com>
CC: Marek Vasut <marex@denx.de>
Acked-by: NMarek Vasut <marex@denx.de>

The driver is used on Xilinx Zynq platform.
Signed-off-by: NMichal Simek <monstr@monstr.eu>
CC: Joe Hershberger <joe.hershberger@gmail.com>
CC: Marek Vasut <marex@denx.de>
Acked-by: NMarek Vasut <marex@denx.de>

When the u-boot address of destination equal to  __start,
no relocation. relocation offset(r9) = 0.
Signed-off-by: NZhong Hongbo <bocui107@gmail.com>
Tested-by: NStefano Babic <sbabic@denx.de>

ARM boards need to change device tree settings as well
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>

These options are just duplicated from arch/arm/cpu/armv7/config.mk
Signed-off-by: NMichal Simek <monstr@monstr.eu>

We don't need to return to cpu_init_crit after calling lowlevel_init, so
lowlevel_init can directly return to the caller of cpu_init_crit.
Signed-off-by: NBenoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>

Disable sibling call optimization based on binutils version.  This is
to work around a bug in the assember in binutils versions < 2.22.
Branches to weak symbols can be incorrectly optimized in thumb mode to
a short branch (b.n instruction) that won't reach when the symbol gets
preempted.

http://sourceware.org/bugzilla/show_bug.cgi?id=12532Signed-off-by: NAllen Martin <amartin@nvidia.com>
Acked-by: NTom Rini <trini@ti.com>

Modeled after gcc-version, add function to get binutils version.
Signed-off-by: NAllen Martin <amartin@nvidia.com>
Acked-by: NWolfgang Denk <wd@denx.de>

The bootm initrd image copy to ram can collide with the stack in cases
where the print buffer size is large (i.e. 1K). The result is intermittent
initrd decompression errors depending on the initrd size MOD 4KB since
the initrd start address is 4KB aligned.

Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Signed-off-by: NRob Herring <rob.herring@calxeda.com>

This patch adds support for the X600 SPEAr600 based board. Its also
the first SPEAr600 board that uses the newly introduced SPEAr600
SPL support. Xloader is not necessary any more. By using the new
"u-boot.spr" make target, one image will generated containing both,
U-Boot SPL (with mkimage header as needed by the SPEAr BootROM, and
the main U-Boot with mkimage header.
Signed-off-by: NStefan Roese <sr@denx.de>
Cc: Amit Virdi <amit.virdi@st.com>
Cc: Vipin Kumar <vipin.kumar@st.com>

On x86 machines gd is unfortunately a #define, so we should avoid using
gd for anything. This patch changes uses of gd to bgd so that ext4fs
can be used on x86.

A better fix would be to remove the #define in x86, but I'm not sure
how to do that.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Change echo to puts characters together where it knows about them
together.  This improves netconsole performance by greatly reducing
the number of packets that are sent.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>

Two sub-commands... start and get.
 * start sets the reference.
 * get prints out the time since the last start (in "<sec>.<msec>" format).
If get is called without start, returns time since boot.
Simple way to benchmark an operation: "timer start;<commands-to-measure>;timer get"
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>

This allows you to read ini-formatted data from anywhere and then
import one of the sections into the environment

This is based on rev 16 at http://code.google.com/p/inih/Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>

Only print when queried, not every time the setting is changed.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>

Old code that is not compliant.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>

Adjustment of Michael Walle's fix patch

Commit 8a0eccb1 breaks netconsole. src_ip
must not be converted to host byte order, because nc_ip is already stored
in network byte order (see string_to_ip(), called by getenv_IPaddr()).
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>

Add a parameter that allows you to store the md5 sum to either a
memory location or a variable.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>

Loosely based on CONFIG_CRC32_VERIFY.

The sum to verify against can be in memory, in a variable, or the last
parameter to the function directly.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>

Add a parameter that allows you to store the SHA1 sum to either a
memory location or a variable.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>

Loosely based on CONFIG_CRC32_VERIFY.

The sum to verify against can be in memory, in a variable, or the last
parameter to the function directly.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>

Improve debug output for test by indicating the number of parameters
and quoting the parameters to make it clear exactly what each contains
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>

Define the new "-2" value for bootdelay to mean autoboot with no delay
and don't check for an abort key (while "0" value means do check).
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>

If while booting the power switch is in OFF position, turn off the fan,
too.
Signed-off-by: NMichael Walle <michael@walle.cc>
Cc: Prafulla Wadaskar <prafulla@marvell.com>

This is required to configure the external 88e6352 switch on nusa.
Signed-off-by: NValentin Longchamp <valentin.longchamp@keymile.com>
cc: Holger Brunck <holger.brunck@keymile.com>
cc: Prafulla Wadaskar <prafulla@marvell.com>
Acked-by: NPrafulla Wadaskar <Prafulla@marvell.com>

The kmnusa board uses a mv88e6352 switch that is connected to the main
eth interface of the kirkwood. Therefore the switch must be configured
so that the kirkwood's egiga eth inferface can be used.
Signed-off-by: NValentin Longchamp <valentin.longchamp@keymile.com>
Cc: Holger Brunck <holger.brunck@keymile.com>
Cc: Prafulla Wadaskar <prafulla@marvell.com>
Acked-By: NPrafulla Wadaskar <prafulla@marvell.com>

Malloc len of 128K caused a warning from
ehci_hcd asking for more.
Signed-off-by: NAlbert ARIBAUD <albert.u.boot@aribaud.net>
Acked-by: NPrafulla Wadaskar <prafulla@marvell.com>

include/common.h has the reset_cpu defined already. No need to
re-define here.
Signed-off-by: NDinh Nguyen <dinguyen@altera.com>
Signed-off-by: NPavel Machek <pavel@denx.de>
Acked-By: NPrafulla Wadaskar <Prafulla@marvell.com>

The hardware design of the IB-NAS62x0 causes the SATA activity
LEDs to be on when idle by default.  Reverse the polarity of the
activity LEDs in early init.
Signed-off-by: NSimon Baatz <gmbnomis@gmail.com>
Cc: Luka Perkov <uboot@lukaperkov.net>
Cc: Prafulla Wadaskar <prafulla@marvell.com>
Acked-by: NLuka Perkov <uboot@lukaperkov.net>

Some boards may differ only in the SDRAM size. This function allows to
fix the size accordingly and we can use the same u-boot binary for both
boards.
Signed-off-by: NHolger Brunck <holger.brunck@keymile.com>
Signed-off-by: NGerlando Falauto <gerlando.falauto@keymile.com>
cc: Prafulla Wadaskar <prafulla@marvell.com>
cc: Valentin Longchamp <valentin.longchamp@keymile.com>

Size of the SDRAM chips might differ between any two (otherwise
identical) instances of the same board.

So add a function kw_sdram_size_adjust() which reads out the current
ram size for a given bank, and adjusts the Kirkwood's SDRAM window size
register accordingly.
Signed-off-by: NGerlando Falauto <gerlando.falauto@keymile.com>
Signed-off-by: NHolger Brunck <holger.brunck@keymile.com>
cc: Prafulla Wadaskar <prafulla@marvell.com>
cc: Valentin Longchamp <valentin.longchamp@keymile.com>

Some boards might be equipped with different SDRAM configurations.
When that is the case, CPU CS Window Size Register (CS[0]n Size)
should be set to the biggest value through board.cfg file; then its
value can be fixed at runtime according to the detected SDRAM size.

Therefore, implement kw_sdram_bs_set().
Signed-off-by: NGerlando Falauto <gerlando.falauto@keymile.com>
Signed-off-by: NHolger Brunck <holger.brunck@keymile.com>
cc: Prafulla Wadaskar <prafulla@marvell.com>
cc: Valentin Longchamp <valentin.longchamp@keymile.com>
cc: Marek Vasut <marex@denx.de>
Acked-by: NPrafulla Wadaskar <Prafulla@marvell.com>