This patch prepares the MXS I2C driver for the conversion to the
new I2C driver framework by pulling out the hard-coded I2C0 address
from all the places.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Heiko Schocher <hs@denx.de>

The following bard configurations have been without active maintenance
for a long time, and the board maintainer agrees to have them removed:

MPC5200:	TOP5200, MINI5200, EVAL5200
MPC860:		TOP860
at91sam9xeXXX:	top9000eval_xe, top9000su_xe
Signed-off-by: NWolfgang Denk <wd@denx.de>
Cc: Reinhard Meyer <reinhard.meyer@emk-elektronik.de>
[trini: Add missing Kconfig removals]
Signed-off-by: NTom Rini <trini@ti.com>

Signed-off-by: NWolfgang Denk <wd@denx.de>

The logic of the return statement in sata_port_status() calls for a
bitwise 'AND' operator, not logical 'AND'. Fix the typo.
Reported-by: NJeroen Hofstee <jeroen@myspectrum.nl>
Cc: Jeroen Hofstee <jeroen@myspectrum.nl>
Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il>

This patch adds support for i211 as well as unprogrammed aka tools only
i210/i211 chip support.
Signed-off-by: NMarcel Ziswiler <marcel@ziswiler.com>

Odroid is based on Exynos4412.
Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com>
Acked-by: NSimon Glass <sjg@chromium.org>

There is no gaps in exynos gpio enum after rework, so the gpio
numbers should be adjusted to the new numbering.
Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com>
Acked-by: NSimon Glass <sjg@chromium.org>

There is no gaps in exynos gpio enum after rework, so the gpio
numbers should be adjusted to the new numbering.
Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com>
Acked-by: NSimon Glass <sjg@chromium.org>

There is no gaps in exynos gpio enum after rework, so the gpio
numbers should be adjusted to the new numbering.
Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com>
Acked-by: NSimon Glass <sjg@chromium.org>

There is no gaps in exynos gpio enum after rework, so the gpio
numbers should be adjusted to the new numbering.
Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com>
Acked-by: NSimon Glass <sjg@chromium.org>

Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com>
Acked-by: NSimon Glass <sjg@chromium.org>

The gpy0 don't need any additional register offset,
but the gpx0 does, so now it is fixed.
Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com>
Acked-by: NSimon Glass <sjg@chromium.org>

The gpf0 offset was bad and it's now fixed.
After fix gpio order in *pinctrl.dts , the gpy0 offset is not required now.
Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com>
Acked-by: NSimon Glass <sjg@chromium.org>

The pinctrl dts was imported from the kernel, but the order
of GPM and GPY is wrong. The gpio enum in: asm/arch/gpio.h
is proper.
Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com>
Acked-by: NSimon Glass <sjg@chromium.org>

This config is required by Odroid, and could be also useful for the other
boards.
Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com>
Acked-by: NSimon Glass <sjg@chromium.org>

The SD Card slot detection pin should be configured as input.
Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com>
Acked-by: NSimon Glass <sjg@chromium.org>

This adds custodian to the pmic subsystem.
Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com>
Cc: Tom Rini <trini@ti.com>

Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>

Commit ae83d882 moved the fixed size mentioned
in the comment but missed the comment.
Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>

Some boards still use xstr(). Replace remaining occurrences
of xstr() by commonly used __stringify().
Signed-off-by: NAnatolij Gustschin <agust@denx.de>

- switch to GENERIC_BOARD
- fix env support from eeprom
Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd.eu>

This patch makes the following changes:
- Set kernel entry point correctly
- Append bootargs from image to global bootargs instead
        of replacing them
- Return end address instead of size from android_image_get_end()
- Give correct parameter to genimg_get_format() in boot_get_ramdisk()
- Move ramdisk message printing from android_image_get_kernel() to
	android_image_get_ramdisk()
Signed-off-by: NAhmad Draidi <ar2000jp@gmail.com>
Cc: Tom Rini <trini@ti.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

This file should contain the bin_hdr generated by the original Marvell
U-Boot implementation. As this is currently not included in this
U-Boot version, we have added this placeholder, so that the U-Boot
image can be generated without errors.

If you have a known to be working bin_hdr for your board, then you
just need to replace this text file here with the binary header
and recompile U-Boot.

In a few weeks, mainline U-Boot will get support to generate the
bin_hdr with the DDR training code itself. By implementing this code
as SPL U-Boot. Then this file will not be needed any more and will
get removed.
Signed-off-by: NStefan Roese <sr@denx.de>

Actually, unmap_sysmem() does nothing.  Just in case.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Simon Glass <sjg@chromium.org>
Acked-by: NSimon Glass <sjg@chromium.org>

- Do not insert a whitespace between a function name and
   an open paranthesis
 - Fix comment style
 - Do not split an error message into multiple lines
   even if it exceeds 80 columns
 - Do not split "for" statement where it fits in 80 columns
 - Do not use assignment in if condition
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: NSimon Glass <sjg@chromium.org>

Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>

Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>

Since commit fe1378a9 (ARM: use r9 for gd), r9 register
is used on ARM to hold global_data.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: NJeroen Hofstee <jeroen@myspectrum.nl>

I finally had a look at the datasheet and spotted an additional
register address difference between regular E1000 and i210/i211 chips.
This patch fixes this and now successfully works on programmed
i210/i211 as well as unprogrammed i211.
Signed-off-by: NMarcel Ziswiler <marcel@ziswiler.com>

Fix typo in defconfig file format description.
Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>

CONFIG_TPL should not be enabled for boards that do not have TPL.
CONFIG_SUPPORT_TPL introduced by this commit should be "select"ed
by boards with TPL support and CONFIG_TPL should depend on it.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>

CONFIG_SPL should not be enabled for boards that do not have SPL.
CONFIG_SUPPORT_SPL introduced by this commit should be "select"ed
by boards with SPL support and CONFIG_SPL should depend on it.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: NSimon Glass <sjg@chromium.org>

Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
Acked-by: NSimon Glass <sjg@chromium.org>

Commit 95186063 may have changed
the logic unintentially from "if (!(swfw_sync & (fwmask | swmask)))"
to "if ((swfw_sync & swmask) && !(swfw_sync & fwmask))". This change
breaks some e1000 NIC with a message "ERROR: Unable to read EEPROM!".
Signed-off-by: NYork Sun <yorksun@freescale.com>
CC: Marek Vasut <marex@denx.de>
CC: Tim Harvey <tharvey@gateworks.com>
Acked-by: NMarcel Ziswiler <marcel@ziswiler.com>

CHUNK_TYPE_DONT_CARE should skip over the specified number of blocks, but
currently fails to increment the device block address. This results in
filesystem images getting written incorrectly. Add the missing block
address incrementing.

Cc: Steve Rae <srae@broadcom.com>
Signed-off-by: NRob Herring <robh@kernel.org>
Reviewed-by: NSteve Rae <srae@broadcom.com>

Enable EXT support in SPL for OMAP4 boards.
Build tested for duovero, omap4_sdp4430 and omap4_panda.
Run time tested on omap4_panda.
Signed-off-by: NGuillaume GARDET <guillaume.gardet@free.fr>
Cc: Tom Rini <trini@ti.com>

spl: do not hang in spl_register_fat_device but return error value. It allows to use both CONFIG_SPL_FAT_SUPPORT and CONFIG_SPL_EXT_SUPPORT.

Do not hang in spl_register_fat_device but return an error value.
It allows to use both CONFIG_SPL_FAT_SUPPORT and CONFIG_SPL_EXT_SUPPORT.
If FAT load fails, then EXT load is tried.
Signed-off-by: NGuillaume GARDET <guillaume.gardet@free.fr>
Cc: Tom Rini <trini@ti.com>

Update documentation according to the EXT SPL support patch set.
Signed-off-by: NGuillaume GARDET <guillaume.gardet@free.fr>
Cc: Tom Rini <trini@ti.com>

Add EXT filesystem support to SPL.
Signed-off-by: NGuillaume GARDET <guillaume.gardet@free.fr>
[trini: Fix a warning and checkpatch problems]
Signed-off-by: NTom Rini <trini@ti.com>