Fixing the get_timer function to return time in miliseconds instead of
ticks. Also fixed PXA boards to use the conventional value of 1000 for
CONFIG_SYS_HZ.
Signed-off-by: NMicha Kalfon <smichak.uv@gmail.com>

omap3_mmc.c was changed to define mmc_legacy_init.
Remove unused functions.

Compile tested on all arm
Runtime tested on Zoom1.
Signed-off-by: NTom Rix <Tom.Rix@windriver.com>

- activate CS4 for accessing the FPGA
- activate Rx buf len > 1 on SMC
- pram activated
- MTDPARTS_DEFAULT defined
- update the size of the flashes in the DTS
  before booting Linux
- MONITOR_LEN updated to 384k
- added CONFIG_HOSTNAME
- added CONFIG_ENV_BUFFER_PRINT
- Environment size reduced to 16k
Signed-off-by: NHeiko Schocher <hs@denx.de>

- activate Rx buf len > 1 on SMC
- pram activated
- MTDPARTS_DEFAULT defined
- update the size of the flash in the DTS
  before booting Linux
- MONITOR_LEN updated to 384k
- added CONFIG_HOSTNAME
- added CONFIG_ENV_BUFFER_PRINT
- Environment size reduced to 16k
Signed-off-by: NHeiko Schocher <hs@denx.de>

Don't use code of new MMC framework in cmd_mmc if CONFIG_GENERIC_MMC
isn't enabled.
Signed-off-by: NDirk Behme <dirk.behme@googlemail.com>

THe TQM8xxL use a ahnd-optimized linker script to efficiently use the
small boot sectors in the flash. This patch makes some room in the
first sector to prepare for a size increase of lib_generic/vsprintf.o
by a future patch.
Signed-off-by: NWolfgang Denk <wd@denx.de>

it's been around since the original commit (2ad6b513) that added two
identical entries.
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>

Signed-off-by: NWolfgang Denk <wd@denx.de>

judging from other printfs in the same file, it seems ata should be
postpended with the interface number, not the address of the global
port variable.  Fixes this for current u-boot-mpc83xx tree:

Configuring for MPC8349ITX board...
sata_sil3114.c: In function 'sata_bus_softreset':
sata_sil3114.c:99: warning: format '%u' expects type 'unsigned int', but argument 2 has type 'struct sata_port *'
sata_sil3114.c:108: warning: format '%u' expects type 'unsigned int', but argument 2 has type 'struct sata_port *'
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>

This patch will create a configuration option for a minimum configuration for
the ns16550 serial driver at drivers/serial/ns16550.c and will apply this new
configuration option to the SIMPC8313.h config file in order to fix the NAND
bootstrap build error.  This option will exclude all functions with exception of
NS16550_putc and NS16550_init.  This will be used primarily to save space and
remove unused code from builds in which space is limited.
Signed-off-by: NRon Madrid <ron_madrid@sbcglobal.net>

swapping the include order suppresses warnings for board configs
that define their own CONFIG_MAX_MEM_MAPPED:

In file included from /home/r1aaha/git/u-boot/include/config.h:5,
                from /home/r1aaha/git/u-boot/include/common.h:35,
                from simpc8313.c:26:
/home/r1aaha/git/u-boot/include/configs/SIMPC8313.h:81:1: warning:
"CONFIG_MAX_MEM_MAPPED" redefined
In file included from /home/r1aaha/git/u-boot/include/config.h:4,
                from /home/r1aaha/git/u-boot/include/common.h:35,
                from simpc8313.c:26:
/home/r1aaha/git/u-boot/include/asm/config.h:28:1: warning: this is
the location of the previous definition
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>

Fix for these build problems:
error: static declaration of 'flash_get_info' follows non-static declaration
Signed-off-by: NWolfgang Denk <wd@denx.de>

This patch fixes a problem recently seen on some 4xx platforms. For
example on Kilauea PCIe slot #0.
Signed-off-by: NStefan Roese <sr@denx.de>

Signed-off-by: NStefan Roese <sr@denx.de>

This patch prepares the good old PMC405 board support for
upcoming PMC405V2 patches.
Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd-electronics.com>
Signed-off-by: NStefan Roese <sr@denx.de>

This patch fixes coding style for PMC405 board support.
Also some unneeded features/code is removed.
Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd-electronics.com>
Signed-off-by: NStefan Roese <sr@denx.de>

1. Changes to the default environment:
  - "bootcmd" defined as "run flash_self"
  - "saveenv" command removed from "update"
  - "uboot" changed to "u-boot" (also in "load")
  - "addmtd" variable defined (and added to all boot commands)
2. CONFIG_CMD_JFFS2 defined to enable "mtdparts" command
3. MTDIDS_DEFAULT and MTDPARTS_DEFAULT defined
4. CONFIG_SYS_CBSIZE changed from 256 to 512. That solves the problem
with truncated "bootargs" environment variable.
Signed-off-by: NIlya Yanok <yanok@emcraft.com>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Move the CONFIG_8xx mpc8xx_pcmcia.c protection out of the C file and
into the Makefile so we avoid pointless compiling of the file.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Move the CONFIG_XXX out of the part_XXX.c file and into Makefile to
avoid pointless compiles.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Because the functions have been defined using macros, grepping for
their definitions is not possible. This patch adds the real function
names in comments.
Signed-off-by: NPetri Lehtinen <petri.lehtinen@inoi.fi>
Acked-by: NMike Frysinger <vapier@gentoo.org>

The CONFIG_CMD_ENV option controls enablement of the `saveenv` command
rather than a generic "env" command, or anything else related to the
environment.  So, let's make sure the define is named accordingly.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Default CONFIG_CMD_IMLS must be disabled when CONFIG_SYS_NO_FLASH is defined
Signed-off-by: NValeriy Glushkov <gvv@lstec.com>

- Extend ub_dev_read() and ub_dev_recv() so they return the length actually
read, which allows for better control and error handling (this introduces
additional error code API_ESYSC returned by the glue mid-layer).

- Clean up definitions naming and usage.

- Other minor cosmetics.

Note these changes do not touch the API proper, so the interface between
U-Boot and standalone applications remains unchanged.
Signed-off-by: NRafal Jaworowski <raj@semihalf.com>

Signed-off-by: NRafal Czubak <rcz@semihalf.com>

Signed-off-by: NRafal Czubak <rcz@semihalf.com>
Acked-by: NRafal Jaworowski <raj@semihalf.com>

De-hardcode range in RAM we search for the API signature. Instead use the stack
pointer as a hint to narrow down the range in which the signature could reside
(it is malloc'ed on the U-Boot heap, and is hoped to remain in some proximity
from stack area). Adjust PowerPC code in API demo to the new scheme.
Signed-off-by: NRafal Czubak <rcz@semihalf.com>
Signed-off-by: NRafal Jaworowski <raj@semihalf.com>

After introducing redundant environment the kernel images was
overlapping with environment.
Signed-off-by: NWolfgang Denk <wd@denx.de>

Signed-off-by: NAndy Fleming <afleming@freescale.com>

Signed-off-by: NAndy Fleming <afleming@freescale.com>

This uses the new MMC framework

Some contributions by Dave Liu <daveliu@freescale.com>
Signed-off-by: NAndy Fleming <afleming@freescale.com>

Here's a new framework (based roughly off the linux one) for managing
MMC controllers.  It handles all of the standard SD/MMC transactions,
leaving the host drivers to implement only what is necessary to
deal with their specific hardware.

This also hooks the infrastructure into the PowerPC board code
(similar to how the ethernet infrastructure now hooks in)

Some of this code was contributed by Dave Liu <daveliu@freescale.com>
Signed-off-by: NAndy Fleming <afleming@freescale.com>

The current MMC infrastructure relies on the existence of an
arch-specific header file.  This isn't necessary, and a couple
drivers were forced to implement dummy files to meet this requirement.
Instead, we move the stuff in those header files into a more appropriate
place, and eliminate the stubs and the #include of asm/arch/mmc.h
Signed-off-by: NAndy Fleming <afleming@freescale.com>

This is to get it out of the way of incoming MMC framework
Signed-off-by: NAndy Fleming <afleming@freescale.com>

MMC cards are not memory, so we stop treating them that way.
Signed-off-by: NAndy Fleming <afleming@freescale.com>

This errata fix is required for 32 bit DDR2 controller on 8572.
May  also be required for P10XX20XX platforms
Signed-off-by: NPoonam_Agarwal-b10812 <b10812@lc1106.zin33.ap.freescale.net>

The ecm variable in sdram.c was being declared for all 8548, but only
used by specific 8548 boards, so we make that variable require those
specific boards, too

The nand code was using an index "i" into a table, and then re-using "i"
to set addresses for each upm.  However, then it relied on the old value
of i still being there to enable things.  Changed the second "i" to "j"
Signed-off-by: NAndy Fleming <afleming@freescale.com>