- 12 7月, 2019 38 次提交
-
-
由 Patrice Chotard 提交于
Add git custodians for STMicroelectronics STM32MP entry. Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Patrick Delaunay 提交于
Allow boot from NOR with basic boot. Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
Add support for boot from NAND in generic ditribution command. Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
Update kernel MTD partition in device tree with U-Boot information. Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
Add support of Trusted boot chain with OP-TEE - reserved 32MB at the end of the DDR for OP-TEE Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
Change config not directly linked to CONFIG_DISTRO_DEFAULTS. Allow to deactivate CONFIG_SYS_MTDPARTS_RUNTIME when CONFIG_MTDPARTS_DEFAULT is defined in defconfig. Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
Adds support for SYSRESET_POWER_OFF = PMIC power off used by command power off and introduced by commit 751fed42 ("sysreset: Add a way to find the last reset"). The driver use SYSRESET_POWER for the PMIC-level power cycle, with restart. Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
Synchronize device tree with v5.2-rc4 label and update the associated u-boot dtsi. Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com> Tested-by: NPierre-Jean Texier <pjtexier@koncepto.io>
-
由 Patrick Delaunay 提交于
Prevent USB enumeration and avoid unnecessary delay in bootcmd_pxe as Ethernet device is not attached to USB. Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
For boot from flash, check presence of default environment to force save env. Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com> Tested-by: NPierre-Jean Texier <pjtexier@koncepto.io>
-
由 Patrick Delaunay 提交于
Removes unused device tree property in SPL to reduce the SPL size by 1kB Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
Remove post.h include as it is used in spl.c Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
Add latest information and correct some information. Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
Add dedicated command to register in fuse a public hash key provided by keygen tool. Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
Allow to update board identification in OTP 59. Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
U-Boot should disable nodes in device tree if needed according ETZPC status in ft_system_setup(). ETZPC itself use an array on addresses to do the match between the status bits and the node. Signed-off-by: NBenjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
Prepare update of package information update in Linux device tree. Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
Add "st,package" entry. Possibles values are: -STM32MP_PKG_AA for LFBGA448 (18*18) package -STM32MP_PKG_AB for LFBGA354 (16*16) package -STM32MP_PKG_AC for TFBGA361 (12*12) package -STM32MP_PKG_AD for TFBGA257 (10*10) package see Linux commit 966d9b928f626a54a0c27c0fdae1e3dfe9bab416 for v5.2-rc1 Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
Reduce difference with kernel Linux device tree. Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
Support for ETZPC is removed as this device is not present in Linux kernel device tree. Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
U-Boot activates regulators by reading the "regulator-boot-on" property in DT; it is requested by M4 early Boot feature. Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
Deactivate WATCHDOG by default in u-boot to avoid issue to boot kernel and rootfs without the needed daemon to reload it. Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com> Tested-by: NPierre-Jean Texier <pjtexier@koncepto.io>
-
由 Patrick Delaunay 提交于
The new type sysreset 'POWER_OFF', introduced by commit 751fed42 ("sysreset: Add a way to find the last reset") is only supported for "syscon-poweroff" compatible. For details see Linux binding: ./Documentation/devicetree/bindings/power/reset/syscon-poweroff.txt This patch removes the support of POWER_OFF for "syscon-reboot" and keeps only the COLD reset (for command reset support) and it introduces the compatible "syscon-poweroff" for the POWER_OFF case. Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
Move 2 ENV configuration flags in board Kconfig - CONFIG_ENV_SECT_SIZE - CONFIG_ENV_OFFSET Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Fabien Dessenne 提交于
Add IPCC mailbox support on stm32mp157 eval and disco boards. Signed-off-by: NFabien Dessenne <fabien.dessenne@st.com> Reviewed-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Fabien Dessenne 提交于
Activate the ipcc mailbox for stm32mp15 configs. Signed-off-by: NFabien Dessenne <fabien.dessenne@st.com> Reviewed-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Fabien Dessenne 提交于
Signed-off-by: NFabien Dessenne <fabien.dessenne@st.com> Reviewed-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Fabien Dessenne 提交于
On STM32 family, the IPCC peripheral allows the communication between 2 processors offering doorbells mechanism. Signed-off-by: NFabien Dessenne <fabien.dessenne@st.com> Signed-off-by: NLoic Pallardy <loic.pallardy@st.com> Reviewed-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Tom Rini 提交于
- spear platform improvements - Android BCB support - Cadence PCIe endpoint driver
-
由 Marek Vasut 提交于
Add TI TCA9539 compatible string for yet another I2C GPIO expander. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Mario Six <mario.six@gdsys.cc> Cc: Peng Fan <van.freenix@gmail.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: NPeng Fan <peng.fan@nxp.com>
-
由 Marek Vasut 提交于
The board_early_init_f() inits clock before initing pinmux. However, the clock configuration code might need to adjust PMIC settings of a PMIC on I2C bus (e.g. board/ti/am335x/board.c does that). If the I2C bus pin muxing is not configured before attempting to communicate with the PMIC, the communication will silently fail and the prcm_init() may configure fast enough CPU clock that the default voltage provided by the PMIC would be insufficient and the platform would become unstable. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Jean-Jacques Hiblot <jjhiblot@ti.com> Cc: Tom Rini <trini@konsulko.com>
-
由 Eugeniu Rosca 提交于
Rename: - doc/{README.avb2 => android/avb2.txt} - doc/{README.android-fastboot => android/fastboot.txt} Add a new file documenting the 'bcb' command: - doc/android/bcb.txt The new directory structure has been reviewed by Simon in https://patchwork.ozlabs.org/patch/1101107/#2176031 . Signed-off-by: NEugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Eugeniu Rosca 提交于
'Bootloader Control Block' (BCB) is a well established term/acronym in the Android namespace which refers to a location in a dedicated raw (i.e. FS-unaware) flash (e.g. eMMC) partition, usually called "misc", which is used as media for exchanging messages between Android userspace (particularly recovery [1]) and an Android-capable bootloader. On higher level, this allows implementing a subset of Android Bootloader Requirements [2], amongst which is the Android-specific bootloader flow [3]. Regardless how the latter is implemented in U-Boot ([3] being the most memorable example), reading/writing/dumping the BCB fields in the development process from inside the U-Boot is a convenient feature. Hence, make it available to the users. Some usage examples of the new command recorded on R-Car H3ULCB-KF ('>>>' is an overlay on top of the original console output): => bcb bcb - Load/set/clear/test/dump/store Android BCB fields Usage: bcb load <dev> <part> - load BCB from mmc <dev>:<part> bcb set <field> <val> - set BCB <field> to <val> bcb clear [<field>] - clear BCB <field> or all fields bcb test <field> <op> <val> - test BCB <field> against <val> bcb dump <field> - dump BCB <field> bcb store - store BCB back to mmc Legend: <dev> - MMC device index containing the BCB partition <part> - MMC partition index or name containing the BCB <field> - one of {command,status,recovery,stage,reserved} <op> - the binary operator used in 'bcb test': '=' returns true if <val> matches the string stored in <field> '~' returns true if <val> matches a subset of <field>'s string <val> - string/text provided as input to bcb {set,test} NOTE: any ':' character in <val> will be replaced by line feed during 'bcb set' and used as separator by upper layers => bcb dump command Error: Please, load BCB first! >>> Users must specify mmc device and partition before any other call => bcb load 1 misc => bcb load 1 1 >>> The two calls are equivalent (assuming "misc" has index 1) => bcb dump command 00000000: 62 6f 6f 74 6f 6e 63 65 2d 73 68 65 6c 6c 00 72 bootonce-shell.r 00000010: 79 00 72 00 00 00 00 00 00 00 00 00 00 00 00 00 y.r............. >>> The output is in binary/string format for convenience >>> The output size matches the size of inspected BCB field >>> (32 bytes in case of 'command') => bcb test command = bootonce-shell && echo true true => bcb test command = bootonce-shell- && echo true => bcb test command = bootonce-shel && echo true >>> The '=' operator returns 'true' on perfect match => bcb test command ~ bootonce-shel && echo true true => bcb test command ~ bootonce-shell && echo true true >>> The '~' operator returns 'true' on substring match => bcb set command recovery => bcb dump command 00000000: 72 65 63 6f 76 65 72 79 00 73 68 65 6c 6c 00 72 recovery.shell.r 00000010: 79 00 72 00 00 00 00 00 00 00 00 00 00 00 00 00 y.r............. >>> The new value is NULL-terminated and stored in the BCB field => bcb set recovery "msg1:msg2:msg3" => bcb dump recovery 00000040: 6d 73 67 31 0a 6d 73 67 32 0a 6d 73 67 33 00 00 msg1.msg2.msg3.. 00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ >>> --- snip --- >>> Every ':' is replaced by line-feed '\n' (0xA). The latter is used >>> as separator between individual commands by Android userspace => bcb store >>> Flush/store the BCB structure to MMC [1] https://android.googlesource.com/platform/bootable/recovery [2] https://source.android.com/devices/bootloader [3] https://patchwork.ozlabs.org/patch/746835/ ("[U-Boot,5/6] Initial support for the Android Bootloader flow") Signed-off-by: NEugeniu Rosca <erosca@de.adit-jv.com>
-
由 Eugeniu Rosca 提交于
Perform the following updates: - Relocate the commit id from the file to the description of U-Boot commit. The AOSP commit is c784ce50e8c10eaf70e1f97e24e8324aef45faf5. This is done to avoid stale references in the file itself. The reasoning is in https://patchwork.ozlabs.org/patch/1098056/#2170209. - Minimize the diff to AOSP, to decrease the effort of the next AOSP backports. The background can be found in: https://patchwork.ozlabs.org/patch/1080394/#2168454. - Guard the static_assert() calls by #ifndef __UBOOT__ ... #endif, to avoid compilation failures of files including the header. Signed-off-by: NEugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by: NSam Protsenko <semen.protsenko@linaro.org> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Tom Rini 提交于
When we have a FIT image being used by SPL by default that means the most common case is that we'll never run into a legacy image. Disable legacy image support by default in that case to reclaim space. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
The name CONFIG_LEGACY_IMAGE_FORMAT reads slightly better along with allowing us to avoid a rather nasty Kbuild/Kconfig issue down the line with CONFIG_IS_ENABLED(IMAGE_FORMAT_LEGACY). In a few places outside of cmd/ switch to using CONFIG_IS_ENABLED() to test what is set. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Roman Kapl 提交于
The TPM specification says that the EXPECT_DATA bit is not valid until the VALID bit is set. Wait for that bit to be set. Fixes problems with Ifineon SPI TPM. Signed-off-by: NRoman Kapl <rka@sysgo.com>
-
- 11 7月, 2019 2 次提交
-
-
由 Miquel Raynal 提交于
Overload the weak function board_boot_order() so that besides choosing the main boot device, we can fallback on USB boot by returning in the BootROM, eg. if the NOR flash is empty while it was the primary boot medium. Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: NStefan Roese <sr@denx.de>
-
由 Miquel Raynal 提交于
The _main call is not supposed to return at all: don't link the branch. Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: NStefan Roese <sr@denx.de>
-