- 07 12月, 2012 1 次提交
-
-
由 Gabe Black 提交于
Because calculate_relocation_address now uses the e820 map, it will be able to avoid addresses over 32 bits and regions that are at high addresses but not big enough for U-Boot. It also means we can remove the hack which limitted U-Boot's idea of the size of memory to less than 4GB. Also take into account the space needed for the heap and stack, so we avoid picking a very small region those areas might overlap with something it shouldn't. Signed-off-by: NGabe Black <gabeblack@chromium.org> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 06 12月, 2012 1 次提交
-
-
由 Stefan Roese 提交于
This patch adds support for the a3m071 board based on the MPC5200. Signed-off-by: NStefan Roese <sr@denx.de>
-
- 28 11月, 2012 2 次提交
-
-
由 Timur Tabi 提交于
The P5040DS reference board (a.k.a "Superhydra") is an enhanced version of P3041DS/P5020DS ("Hydra") reference board. Signed-off-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NShaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
由 Wu, Josh 提交于
Signed-off-by: NJosh Wu <josh.wu@atmel.com> Acked-by: NAndreas Bießmann <andreas.devel@googlemail.com> Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
- 14 11月, 2012 1 次提交
-
-
- update clock settings for higher perfomance - change standard baud rate to 115200 - fix flash base address - remove unused defines - add I2C support - switch form board dependent flash to cfi - remove board dependent flash code - use sdram bank 0 instead of bank 1 on boot - enable on board frame buffer instead external - remove fake mac address form config - add watchdog support - add status led support Signed-off-by: NJens Scharsig (BuS Elektronik) <esw@bus-elektronik.de> [agust: fixed small style issues and build warning] Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
- 31 10月, 2012 2 次提交
-
-
由 Raphael Assenat 提交于
Signed-off-by: NRaphael Assenat <raph@8d.com> [trini: Squash boards.cfg / MAINTAINERS change into main patch] Signed-off-by: NTom Rini <trini@ti.com>
-
由 Pali Rohár 提交于
Based on previous work by: Alistair Buxton <a.j.buxton@gmail.com> Signed-off-by: NPali Rohár <pali.rohar@gmail.com> Cc: Ивайло Димитров <freemangordon@abv.bg>
-
- 30 10月, 2012 1 次提交
-
-
由 Lucas Stach 提交于
This adds board support for the Toradex Colibri T20 module. Working functions: - SD card boot - USB boot - Network - NAND environment Signed-off-by: NLucas Stach <dev@lynxeye.de> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
- 29 10月, 2012 1 次提交
-
-
由 Wolfgang Denk 提交于
These boards have long reached EOL, and there has been no indication of any active users of such hardware for years. Get rid of the dead weight. Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Wolfgang Grandegger <wg@denx.de>
-
- 26 10月, 2012 1 次提交
-
-
由 Andrew Bradford 提交于
Add targets of am335x_evm_uart{1,2,3,4,5} to have serial input/output on UART{1,2,3,4,5} for use with the Beaglebone RS232 cape, am335x_evm daughterboard, and other custom configurations. Modify target for am335x_evm to include SERIAL1 and CONS_INDEX=1 options in order to clarify UART selection requirements. Signed-off-by: NAndrew Bradford <andrew@bradfordembedded.com>
-
- 24 10月, 2012 2 次提交
-
-
由 Alison Wang 提交于
Add Freescale MCF54418TWR ColdFire development board support. Signed-off-by: NTsiChung Liew <tsicliew@gmail.com> Signed-off-by: NJason Jin <Jason.jin@freescale.com> Signed-off-by: NAlison Wang <b18965@freescale.com>
-
由 Gerlando Falauto 提交于
Add support for the new kmvect1 board powered by the mpc8309 processor. As this board is very similar to the existing suvd3, instead of adding a new config header file, just add a new config option to suvd3.h Signed-off-by: NGerlando Falauto <gerlando.falauto@keymile.com> Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
- 23 10月, 2012 1 次提交
-
-
由 York Sun 提交于
The T4240QDS is a high-performance computing evaluation, development and test platform supporting the T4240 QorIQ Power Architecture™ processor. SERDES Connections 32 lanes grouped into four 8-lane banks Two “front side” banks dedicated to Ethernet Two “back side” banks dedicated to other protocols DDR Controllers Three independant 64-bit DDR3 controllers Supports rates up to 2133 MHz data-rate Supports two DDR3/DDR3LP UDIMM/RDIMMs per controller QIXIS System Logic FPGA Each DDR controller has two DIMM slots. The first slot of each controller has up to 4 chip selects to support single-, dual- and quad-rank DIMMs. The second slot has only 2 chip selects to support single- and dual-rank DIMMs. At any given time, up to total 4 chip selects can be used. Detail information can be found in doc/README.t4qds Signed-off-by: NYork Sun <yorksun@freescale.com> Signed-off-by: NAndy Fleming <afleming@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NPrabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: NShengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: NRoy Zang <tie-fei.zang@freescale.com> Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
- 18 10月, 2012 1 次提交
-
-
由 Paul Gortmaker 提交于
The sbc8548/60 (both similar, just variations in UART hardware) support has been removed from the linux kernel as of v3.6-rc1~132 so lets also now remove it from the u-boot tree as well. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 17 10月, 2012 1 次提交
-
-
由 Stefan Roese 提交于
As the board seems to be unmaintained for some time, lets remove the support in mainline completely. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: James F. Dougherty <jfd@broadcom.com> Cc: Wolfgang Denk <wd@denx.de> Acked-by: NMarek Vasut <marex@denx.de>
-
- 16 10月, 2012 10 次提交
-
-
由 Zhi-zhou Zhang 提交于
Both big-endian and little-endian are tested with below commands: Rom version: (Default, Now we config it as rom version) qemu-system-mips64el -M mips -bios u-boot.bin -cpu MIPS64R2-generic -nographic qemu-system-mips64 -M mips -bios u-boot.bin -cpu MIPS64R2-generic -nographic Ram version: qemu-system-mips64el -M mips -cpu MIPS64R2-generic -kernel u-boot -nographic qemu-system-mips64 -M mips -cpu MIPS64R2-generic -kernel u-boot -nographic Signed-off-by: NZhizhou Zhang <etou.zh@gmail.com> Signed-off-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
由 Łukasz Dałek 提交于
Add basic support for HP iPAQ h2200 palmtop. h2200 palmtop was targeted to general consumers. It has 64 MB of RAM, 32 MB flash. No intergrated Wi-Fi nor Ethernet. Based on Intel PXA255 processor. It was shipped with Windows CE 4.2 operating system. Signed-off-by: NLukasz Dalek <luk0104@gmail.com>
-
由 Fabio Estevam 提交于
mx6qsabreauto is a board based on mx6q SoC with the following features: - 2GB of DDR3 - 2 USB ports - 1 HDMI output port - SPI NOR - 2 LVDS LCD ports - Gigabit Ethernet - Camera - eMMC and SD card slot - Multichannel Audio - CAN - SATA - NAND - PCIE - Video Input Add very basic support for it. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
-
由 Fabio Estevam 提交于
mx6qsabresd is a board based on mx6q SoC with the following features: - 1GB of DDR3 - 1 USB OTG port - 1 HDMI output port - SPI NOR - LVDS panel - Gigabit Ethernet - Camera Connector - eMMC and SD card slot - Audio Add very basic support for it. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
-
由 Fabio Estevam 提交于
Factor out common DDR3 initialization code, allowing easier maintainance of such scripts. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
-
由 Thierry Reding 提交于
Medcom is the marketing name for an older, PXA-based version of the same device. In order to avoid confusion, rename the Tegra-based version to the new marketing name. Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de> Acked-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Stefan Roese 提交于
As the board seems to be unmaintained for some time, lets remove the support in mainline completely. Signed-off-by: NStefan Roese <sr@denx.de> Cc: James MacAulay <james.macaulay@amirix.com> Acked-by: NMarek Vasut <marex@denx.de>
-
由 Stefan Roese 提交于
As the board seems to be unmaintained for some time, lets remove the support in mainline completely. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Peter De Schrijver <p2@mind.be> Acked-by: NMarek Vasut <marex@denx.de>
-
由 Stefan Roese 提交于
Since the IOP480 (PPC401/3 variant from PLX) is only used on 2 boards that are not actively maintained, lets remove support for it completely. This way the ppc4xx code will get a bit cleaner. Signed-off-by: NStefan Roese <sr@denx.de> Acked-by: NMatthias Fuchs <matthias.fuchs@esd.eu> Acked-by: NMarek Vasut <marex@denx.de>
-
由 Tom Rini 提交于
After taking with the former maintainer, delete this platform. The patch is from the former maintainer. Signed-off-by: NTom Rini <trini@ti.com>
-
- 06 10月, 2012 1 次提交
-
-
由 Wolfgang Denk 提交于
Due to grown code sizes the TQM85xx boards don't build any more with some older tool chains (like ELDK 4.2). As these boards have long reached EOL it seems a waste of effort trying to fix them. The vendor has agreed to drop support for them, too. So let's get rid of them. Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Stefan Roese <sr@denx.de> cc: Kim Phillips <kim.phillips@freescale.com> Acked-by: NStefan Roese <sr@denx.de>
-
- 05 10月, 2012 1 次提交
-
-
由 Dinh Nguyen 提交于
Add minimal support for Altera's SOCFPGA Cyclone 5 hardware. Signed-off-by: NDinh Nguyen <dinguyen@altera.com> Signed-off-by: NChin Liang See <clsee@altera.com> Signed-off-by: NPavel Machek <pavel@denx.de> Reviewed-by: NMarek Vasut <marex@denx.de> Acked-by: NTom Trini <trini@ti.com> Cc: Wolfgang Denx <wd@denx.de> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Stefan Roese <sr@denx.de> ---- v8: Remove no_return attribute for reset_cpu Based on v2012.10-rc2
-
- 04 10月, 2012 2 次提交
-
-
由 Michal Simek 提交于
Add support for Xilinx Zynq board. Signed-off-by: NMichal Simek <monstr@monstr.eu> Acked-by: NMarek Vasut <marex@denx.de> CC: Joe Hershberger <joe.hershberger@gmail.com>
-
由 Stefan Roese 提交于
This patch adds support for the X600 SPEAr600 based board. Its also the first SPEAr600 board that uses the newly introduced SPEAr600 SPL support. Xloader is not necessary any more. By using the new "u-boot.spr" make target, one image will generated containing both, U-Boot SPL (with mkimage header as needed by the SPEAr BootROM, and the main U-Boot with mkimage header. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Amit Virdi <amit.virdi@st.com> Cc: Vipin Kumar <vipin.kumar@st.com>
-
- 03 10月, 2012 6 次提交
-
-
由 Luka Perkov 提交于
Add support for new board iConnect from Iomega. More information about the device can be found here: http://go.iomega.com/en/products/network-storage-desktop/wireless-data-station/network-hard-drive-iconnect/?partner=4735Signed-off-by: NLuka Perkov <uboot@lukaperkov.net> Tested-by: NWojciech Dubowik <wojciech.dubowik@neratec.com> Tested-by: NTim Fletcher <tim@night-shade.org.uk>
-
由 Simon Guinot 提交于
This patch adds support for the LaCie board d2 Network v2 which share a lot of hardware caracteristics with the 2Big Network v2. - CPU: Marvell 88F6281 1200Mhz - SDRAM memory: 256MB DDR2 400Mhz - 2 SATA ports: internal and eSATA - Gigabit ethernet: PHY Marvell 88E1116R - Flash memory: SPI NOR 512KB (Macronix MX25L4005A) - i2c EEPROM: 512 bytes (24C04 type) - 2 USB2 ports: host and host/device - 1 push button - 1 power switch - 1 SATA LED (bi-color, blue and red) Signed-off-by: NSimon Guinot <simon.guinot@sequanux.org>
-
由 Simon Guinot 提交于
This patch adds support for the LaCie boards Network Space v2 (Lite and Mini). This two boards are derived from the Network Space v2 and a lot of hardware caracteristics are shared. - CPU: Marvell 88F6192 800Mhz - SDRAM memory: 128MB DDR2 200Mhz - 1 SATA port: internal - Gigabit ethernet: PHY Marvell 88E1318 - Flash memory: SPI NOR 512KB (Macronix MX25L4005A) - i2c EEPROM: 512 bytes (24C04 type) - 2 USB2 ports (Lite only): host and host/device - 1 push button - 1 SATA LED (bi-color, blue and red) Signed-off-by: NSimon Guinot <simon.guinot@sequanux.org>
-
由 Gabriel Huau 提交于
Support of the MINI2440 board from FriendlyARM from an old version of u-boot : http://repo.or.cz/r/u-boot-openmoko/mini2440.git Currently, supporting only boot from NOR. Signed-off-by: NGabriel Huau <contact@huau-gabriel.fr>
-
由 Hideyuki Sano 提交于
The Armadillo-800EVA board has Renesas R-Mobile R8A7740, 512MB DDR3-SDRAM, Ethernet, and more. This patch supports the following functions: - 512MB DDR3-SDRAM - Serial console (SCIF) - Ethernet MAC(MII) & PHY(SMSC) Signed-off-by: NHideyuki Sano <hideyuki.sano.dn@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Nobuhiro Iwamatsu 提交于
The KZM-A9-GT board has Renesas R-Mobile SH73A0, 512MB DDR2-SDRAM, USB, Ethernet, and more. This patch supports the following functions: - 512MB DDR2-SDRAM - 16MB NOR Flash memory - Serial console (SCIF) - Ethernet (SMSC) - I2C Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
- 19 9月, 2012 1 次提交
-
-
由 Marek Vasut 提交于
This board is the only board that still sticks to OneNAND IPL. Remove this board, since we have SPL around for a while and OneNAND is well supported in the SPL framework. The board can be revived if necessary. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Tom Rini <trini@ti.com>
-
- 13 9月, 2012 1 次提交
-
-
由 Andreas Bießmann 提交于
This patch is derived from an older patch provided by atmel in its buildroot-avr32-v3.0.0.tar.bz2 Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com> cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: NHans-Christian Egtvedt <egtvedt@samfundet.no>
-
- 05 9月, 2012 1 次提交
-
-
由 Jens Scharsig 提交于
* add ram target for EB+CPUx9k2 board (eb_cpux9k2_ram_config) Signed-off-by: NJens Scharsig <js_at_ng@scharsoft.de> Signed-off-by: NJens Scharsig (BuS Elektronik) <esw@bus-elektronik.de> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
- 01 9月, 2012 2 次提交
-
-
由 Bo Shen 提交于
Add at91sam9x5 series spi flash boot support Using at91sam9x5ek_spiflash to configure, then it can boot from at25df321 serial flash SPI mater work in 30Mhz speed, while not 1Mhz speed. This will base on atmel_spi patch, or else, it will occur receive overrun Signed-off-by: NBo Shen <voice.shen@atmel.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Matt Sealey 提交于
* Move Efika MX Smarttop and Smartbook boards into a "genesi" vendor directory * Rename efikamx -> mx51_efikamx since there is an mx53_efikamx and mx6_efikamx to come Signed-off-by: NMatt Sealey <matt@genesi-usa.com> Acked-by: NStefano Babic <sbabic@denx.de> Acked-by: NStefano Babic <sbabic@denx.de>
-