- 23 4月, 2015 1 次提交
-
-
由 Eric Nelson 提交于
Initial filesystem images are generally highly compressible. Add a routine gzwrite that allows gzip-compressed images to be written to block devices. Signed-off-by: NEric Nelson <eric.nelson@boundarydevices.com> Reviewed-by: NTom Rini <trini@ti.com>
-
- 21 4月, 2015 22 次提交
-
-
由 Linus Walleij 提交于
commit aed2fbef "dm: serial: Tidy up the pl01x driver" caused a regression on (real hardware) PL010 by omitting to update the line control register when switching baudrate. Fix this by inlining the missing write to the baud control register. Also renaming the set_line_control() function to pl011_set_line_control() since this function is clearly PL011-specific, and it won't suffice to call that to set up line control. Tested on the Integrator/AP hardware. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Andrey Skvortsov 提交于
two CMD_DNS options were added by commit 60296a83 ("commands: add more command entries in Kconfig") Signed-off-by: NAndrey Skvortsov <andrej.skvortzov@gmail.com> Acked-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
-
由 Bin Meng 提交于
The name "pch_gbe.%x" exceeds the limit of the name in the 'struct eth_device'. Rename it as just "pch_gbe". Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Michal Simek 提交于
Use phys_addr_t which is used in function prototype in system.h. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Shengzhou Liu 提交于
commit 3c6928fd "net: phy: fix warnings with W=1" caused some PHYs(e.g. CS4315/CS4340) not working. This patch fixes the warning and make those special PHYs working as well. Signed-off-by: NShengzhou Liu <Shengzhou.Liu@freescale.com>
-
由 Luca Ellero 提交于
This patch adds a support for KSZ8081MNX in MII mode. Signed-off-by: NLuca Ellero <luca.ellero@brickedbrain.com> Acked-by: NPavel Machek <pavel@denx.de>
-
由 Tim James 提交于
When accessing PHY registers it is often desirable to only update selected bits, so it is necessary to first read the current value before writing back an modified value with the relevant bits updated. To simplify this and to allow such operations to be incorporated into simple shell scripts propose adding a 'modify' option to the existing mii command, which takes a mask indicating the bits to be updated in addition to a data value containing the new bits, ie, <updated> = (<data> & <mask>) | (<current> & ~<mask>). Signed-off-by: NTim <tim.james@macltd.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Joe Hershberger <joe.hershberger@gmail.com> Cc: Jeroen Hofstee <jeroen@myspectrum.nl> Cc: Tom Rini <trini@konsulko.com> Cc: Tim <tim.james@macltd.com>
-
由 Joe Hershberger 提交于
Update to my corporate email and make the supported filter and aliases more accurate. Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Thierry Reding 提交于
Turn ioaddr into an unsigned long rather than a sized 32-bit variable. While at it, fix a couple of pointer to integer cast size mismatch warnings by casting through unsigned long going from pointers to integers and vice versa. Cc: Joe Hershberger <joe.hershberger@gmail.com> Signed-off-by: NThierry Reding <treding@nvidia.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Codrin Ciubotariu 提交于
Some Realtek Ethernet PHYs, like RTL8211D(G/N) and RTL8211E(G), have interrupts enabled by default. If the interrupt is not treated later by the OS and the PHY's interrupt line is enabled and shared with other interrupts, the system will get an interrupt storm. This patch disables the interrupt for PHY devices that use one of the current Realtek Ethernet PHY drivers. Some of Realtek Ethernet PHYs, such as RTL8211B(L) have the interrupt masked. In this case, the functionality of the PHY should not be afected since this patch brings INER and INSR registers to their default values. Signed-off-by: NCodrin Ciubotariu <codrin.ciubotariu@freescale.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
-
由 Scott Wood 提交于
U-Boot on this board grew a long time ago past the 384 KiB that it reserves for the U-Boot image, before the environment. Thus, saveenv overwrites the U-Boot image and bricks the board. I tried to find out when U-Boot grew beyond this point, but there is a long stretch in the history where this board did not build -- and AFAICT when it did fit in 384 KiB, it was missing vital features such as fdt support. Turning off CONFIG_VIDEO was not enough to make it fit. Thus, I don't think we have any choice other than to move the environment. Signed-off-by: NScott Wood <scottwood@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
由 Shengzhou Liu 提交于
CONFIG_PHY_AQ1202 is no longer needed, use CONFIG_PHY_AQUANTIA. Signed-off-by: NShengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
由 Scott Wood 提交于
U-Boot does not have system calls (the services it exposes to standalone commands use a different mechanism), so the syscall handler is dead code. It's also broken code, as it assumes it is located at 0xc00 -- while even before the patch to stop relocating exception vectors to 0, U-Boot had the syscall at 0x900. The critical and machine check return paths are never called -- the regular exception return path is used instead, which works because xSRR0/1 have already been saved and can be restored via the regular SRR0/1 (we don't care too much in U-Boot about taking a critical/mcheck inside another exception prolog/epilog). Also remove a few other small unused functions. Signed-off-by: NScott Wood <scottwood@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
由 Scott Wood 提交于
Booke does not require exception vectors to be located at address zero. U-Boot was doing so anyway, simply because that's how it had been done on other PPC. The downside of this is that once the OS is loaded to address zero, the exception vectors have been overwritten -- which makes it difficult to diagnose a crash that happens after that point. The IVOR setup and trap entry code is simplified somewhat as a result. Also, there is no longer a need to align individual exceptions on 0x100 byte boundaries. Signed-off-by: NScott Wood <scottwood@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
由 Shengzhou Liu 提交于
Support SODIMM D3XP12081XL10AA 1866MT/s on T2080RDB. Enable CONFIG_CMD_MEMTEST as well. Signed-off-by: NShengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
由 Chunhe Lan 提交于
Now cortina driver uses macro CONFIG_SYS_CORTINA_FW_IN_NOR to define that firmware of cortina driver is stored in the nor flash. Signed-off-by: NChunhe Lan <Chunhe.Lan@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
由 Ying Zhang 提交于
The fuse status register provides the values from on-chip voltage ID efuses programmed at the factory. These values define the voltage requirements for the chip. u-boot reads FUSESR and translates the values into the appropriate commands to set the voltage output value of an external voltage regulator. Signed-off-by: NYing Zhang <b40530@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
由 Shengzhou Liu 提交于
T2080 rev1.1 also needs erratum a007186. Signed-off-by: NShengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
由 Alexander Graf 提交于
QEMU 2.3 changes the address layout of the CCSR map in the PV ppce500 machine to reside in higher address space. Unfortunately, this exposed a glitch in u-boot for ppce500: While providing a function to dynamically evaluate the CCSR region's position in physical address space, we never used it. Plus we forgot to support 64bit physical addresses. This patch fixes that mishap, making u-boot work fine with latest QEMU again. Signed-off-by: NAlexander Graf <agraf@suse.de> Reviewed-by: NScott Wood <scottwood@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
由 Curt Brune 提交于
According to the MPC8555/MPC8541 reference manual the SS_EN (source synchronous enable) bit in the DDR_SDRAM_CLK_CNLT register must be set during initialization. >From section 9.4.1.8 of that manual: Source synchronous enable. This bit field must be set during initialization. See Section 9.6.1, "DDR SDRAM Initialization Sequence," details. 0 - Reserved 1 - The address and command are sent to the DDR SDRAMs source synchronously. In addition, Freescale application note AN2805 is also very clear that this bit must be set. This patch reverts a change introduced by commit 457caecd. Testing Done: Compiled targets CONFIG_TARGET_MPC8555CDS and CONFIG_TARGET_MPC8541CDS and inspected the generated assembly code to verify the SS_EN bit was being set. There is one extra instruction emitted: fff9b774: 65 29 80 00 oris r9,r9,32768 Compiled the CONFIG_TARGET_MPC8548CDS target and verified that no additional instructions were emitted related to this patch. Booted an image on a MPC8541 based board successfully. Signed-off-by: NCurt Brune <curt@cumulusnetworks.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
- 20 4月, 2015 13 次提交
-
-
-
由 Heiko Schocher 提交于
Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
the ldb clock can be setup in board code (for example set through PLL5). Update the ldb_clock rate also through board code. This should be removed, if a clock framework is availiable. Signed-off-by: NHeiko Schocher <hs@denx.de> Tested-by: NEric Nelson <eric.nelson@boundarydevices.com>
-
由 Heiko Schocher 提交于
make the ldb_clock configurable through the new define CONFIG_SYS_LDB_CLOCK. This is needed as the ldb clock is not always 650000000, for example on the aristainetos2 board, where the ldb clock derives from PLL5 clock. Signed-off-by: NHeiko Schocher <hs@denx.de> Tested-by: NEric Nelson <eric.nelson@boundarydevices.com>
-
由 Sjoerd Simons 提交于
Make the sandbox setup more generic/examplary by including config_distro_defaults.h and config_distro_bootcmd.h. Among other things this makes it easy to test whether images will boot though with the standard distro bootcmds by running e.g: u-boot -c 'host bind 0 myimage.img ; boot' By default there are 2 target host devices to emulate device with multiple storage devices (e.g. internal ("host 0") and external ("host 1") and verify that the prioritization and fallbacks do work correctly. Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed by: Simon Glass <sjg@chromium.org> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Sjoerd Simons 提交于
Define default PXE client architecture identifiers for IA32 (0x0 aka Intel x86PC) and Intel x86-64 (0x9 aka EFI x86-64). This prepares for usage for config_distro_defaults in the sandbox architecture Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk>
-
由 Sjoerd Simons 提交于
Properly map memory through map_sysmem so that pxe can be used from the sandbox. Tested in sandbox as well as on jetson-tk1, odroid-xu3, snow as peach-pi boards Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Sjoerd Simons 提交于
Define the common shared block environment for the host interface in preperation for the sandbox build to use config_distro_bootcmd. Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: NSimon Glass <sjg@chromium.org> Acked-by: NStephen Warren <swarren@nvidia.com>
-
由 Sjoerd Simons 提交于
A common pattern to check if a certain device exists (e.g. in config_distro_bootcmd) is to use: <interface> dev [device] Implement host dev [device] so this pattern can be used for sandbox host devices. Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Sjoerd Simons 提交于
As suggested by Simon Glass, rename the sb command to host but keep the old sb command as an alias Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Sjoerd Simons 提交于
Add dummy bootz_setup implementation allowing the u-boot sandbox to run bootz. This recognizes both ARM and x86 zImages to validate a valid zImage was loaded. Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Sjoerd Simons 提交于
Follow the convention of other architectures and move the platform specific linux bootm code into sandbox/lib/bootm.c. Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Sjoerd Simons 提交于
Only do sandbox filesystem access when using the hostfs device interface, rather then falling back to it in all cases. This prevents confusion situations due to the fallback being taken rather then an unsupported error being raised. Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: NSimon Glass <sjg@chromium.org> Acked-by: NSimon Glass <sjg@chromium.org>
-
- 19 4月, 2015 4 次提交
-
-
-
由 Wu, Josh 提交于
Make cover letter shows like 0/x, 00/xx and 000/xxx etc. Signed-off-by: NJosh Wu <josh.wu@atmel.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Tom Rini 提交于
The help text for -V says we will pass V=1 but all it really did was not pass in -s. Change the logic to pass make V=1 with given to buildman -V or -s to make otherwise. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: NTom Rini <trini@konsulko.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Tom Rini 提交于
When told to keep outputs, be much more liberal in what files we keep. In addition to adding 'MLO', keep anything that matches u-boot-spl.* (so that we keep the map file as well) and anything we generate about 'u-boot itself. A large number of bootable formats now match this and thus it's easier to build many targets and then boot them afterwards using buildman. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: NTom Rini <trini@konsulko.com> Acked-by: NSimon Glass <sjg@chromium.org>
-