http://www.denx.de/wiki/DULG/UBootCmdGroupFlash#UBootCmdFlMtdparts
provides a flexible way to create and maintain u-boot mtd
partitions. This allows commands such as "nand erase fs"
to work and the user no longer needs to decode the absolute
nand offsets. This patch enables this function for beagleboard
Signed-off-by: NNishanth Menon <nm@ti.com>
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>

On the pcm030 the environment is located in the onboard EEPROM. But we want
to handle flash sector protection in a safe manner. So we must read the
unlock environment variable from EEPROM instead from flash.

This patch is required as long the evironment is saved into the EEPROM.

Stefan: Additional change as suggested by Wolfgang, use bigger char array
(instead of 4).
Signed-off-by: NEric Schumann <E.Schumann@phytec.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Acked-by: NWolfgang Denk <wd@denx.de>
Signed-off-by: NStefan Roese <sr@denx.de>

Signed-off-by: NJon Smirl <jonsmirl@gmail.com>

Update CHANGELOG
Signed-off-by: NWolfgang Denk <wd@denx.de>

Signed-off-by: NVivek Kutal <vivek.kutal@azingo.com>
Signed-off-by: NRemy Bohmer <linux@bohmer.net>

On systems where U-Boot is linked to another address than it really lays
(e.g. backup image), calls via function pointers must be fixed with a
'+= gd->reloc_off'.
This was not done for none_compr in ubifs_compressors_init() what leads
to system crash on ubifsmount command.
Signed-off-by: NMichael Lawnick <ml.lawnick@gmx.de>
Acked-by: NStefan Roese <sr@denx.de>

This patchset adds these UBIFS related commands:

- ubifsmount
  Mount an UBIFS volume

- ubifsls
  List a directory of the mounted UBIFS volume

- ubifsload
  Load a file from the mounted UBIFS volume to memory
Signed-off-by: NStefan Roese <sr@denx.de>

The U-Boot UBIFS implementation is largely a direct copy from the current
Linux version (2.6.29-rc6). As already done in the UBI version we have an
"abstraction layer" to redefine or remove some OS calls (e.g. mutex_lock()
...). This makes it possible to use the original Linux code with very
little changes. And by this we can better update to later Linux versions.

I removed some of the Linux features that are not used in the U-Boot
version (e.g. garbage-collection, write support).
Signed-off-by: NStefan Roese <sr@denx.de>
CC: Artem Bityutskiy <dedekind@infradead.org>
CC: Adrian Hunter <ext-Adrian.Hunter@nokia.com>

This patch adds LZO decompression support to U-Boot. It is needed for
the upcoming UBIFS support, since UBIFS uses LZO as default compressor/
decompressor. Since we only support read-only in UBIFS, only the
decompressor is needed.

All this is copied with minor changes from the current Linux kernel
version (2.6.28-rc8).

This patch only implements this LZO decompressor support for PPC.
Other platforms using UBIFS will have to add the required
"include/asm/unaligned.h" as well. It should be fairly easy to copy this
from the Linux source tree as I have done it for PPC in this patch.
Signed-off-by: NStefan Roese <sr@denx.de>

Currently the mtdparts commands are included in the jffs2 command support.
This doesn't make sense anymore since other commands (e.g. UBI) use this
infrastructure as well now. This patch separates the mtdparts commands from
the jffs2 commands making it possible to only select mtdparts when no JFFS2
support is needed.
Signed-off-by: NStefan Roese <sr@denx.de>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

Signed-off-by: NStefan Roese <sr@denx.de>

This is the InterControl custom device based on the MPC5200B chip.
Signed-off-by: NGrzegorz Bernacki <gjb@semihalf.com>

Fix this warning:

board.c: In function 'board_init_r':
board.c:653: warning: unused variable 'i'
board.c:651: warning: unused variable 'e'
Signed-off-by: NStefan Roese <sr@denx.de>

Remove this code. It's not needed. The 4xx EMAC driver stores the MAC
addresses into the SoC registers instead.
Signed-off-by: NStefan Roese <sr@denx.de>

This patch replaces in/out8/16/32 macros by in/out_8/_be16/_be32
macros. Also volatile pointer references are replaced by the
new accessors.
Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: NStefan Roese <sr@denx.de>

This patch replaces in/out8/16/32 macros by in/out_8/_be16/_be32
macros. Also volatile pointer references are replaced by the
new accessors.
Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: NStefan Roese <sr@denx.de>

Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: NStefan Roese <sr@denx.de>

Fix building DASA_SIM boards by increasing U-Boot's size in flash.
Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: NStefan Roese <sr@denx.de>

-strip unused features
-fix resetting phy
Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: NStefan Roese <sr@denx.de>

Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd-electronics.com>
Signed-off-by: NStefan Roese <sr@denx.de>

Signed-off-by: NGraeme Russ <graeme.russ@gmail.com>

Signed-off-by: Graeme Russ <graeme.russ at gmail.com>

Moved sub-features of the SC520 code which is currently selectively compiled
using #ifdef out of sc520.c into individual files selectively compiled via
the makefile

Signed-off-by: Graeme Russ <graeme.russ at gmail.com>

Rewrite interrupt handling functionality for the i386 port. Separated
functionality into separate CPU and Architecture components.

It appears as if the i386 interrupt handler functionality was intended
to allow multiple handlers to be installed for a given interrupt.
Unfortunately, this functionality was not fully implemented and also
had the problem that irq_free_handler() does not allow the passing
of the handler function pointer and therefore could never be used to
free specific handlers that had been installed for a given IRQ.

There were also various issues with array bounds not being fully
tested.

I had two objectives in mind for the new implementation:

1) Keep the implementation as similar as possible to existing
   implementations. To that end, I have used the leon2/3
   implementations as the reference

2) Seperate CPU and Architecture specific elements. All specific i386
   interrupt functionality is now in cpu/i386/ with the high level
   API and architecture specific code in lib_i386. Functionality
   specific to the PC/AT architecture (i.e. cascaded i8259 PICs) has
   been further split out into an individual file to allow for the
   implementation of the PIC architecture of the SC520 CPU (supports
   more IRQs)

Signed-off-by: Graeme Russ <graeme.russ at gmail.com>

Moved ali512x.h from include/asm-i386/ic/ to /include

Signed-off-by: Graeme Russ <graeme.russ at gmail.com>

Options are now all uniformly CONFIG_SYS_SC520_<option>

Signed-off-by: Graeme Russ <graeme.russ at gmail.com>

A recent gcc added a new unaligned rodata section called '.rodata.str1.1',
which needs to be added the the linker script.  Instead of just adding this
one section, we use a wildcard ".rodata*" to get all rodata linker section
gcc has now and might add in the future.

However, '*(.rodata*)' by itself will result in sub-optimal section
ordering.  The sections will be sorted by object file, which causes extra
padding between the unaligned rodata.str.1.1 of one object file and the
aligned rodata of the next object file.  This is easy to fix by using the
SORT_BY_ALIGNMENT command.

This patch has not be tested one most of the boards modified.  Some boards
have a linker script that looks something like this:

*(.text)
. = ALIGN(16);
*(.rodata)
*(.rodata.str1.4)
*(.eh_frame)

I change this to:

*(.text)
. = ALIGN(16);
*(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))

This means the start of rodata will no longer be 16 bytes aligned.
However, the boundary between text and rodata/eh_frame is still aligned to
16 bytes, which is what I think the real purpose of the ALIGN call is.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>
CC: Ben Warren <biggerbadderben@gmail.com>
CC: Daniel Hellstrom <daniel@gaisler.com>
CC: Michal Simek <monstr@seznam.cz>
CC: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
CC: Scott McNutt <smcnutt@psyent.com>
CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

The environment is the canonical storage location of the mac address, so
we're killing off the global data location and moving everything to
querying the env directly.

In the ppc case, these things are part of the legacy ABI, so keep them
around but mark them as legacy so no new code will touch them.

Also stop calling load_sernum_ethaddr() since all boards now implement
this as a stub.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
CC: Ben Warren <biggerbadderben@gmail.com>

The environment is the canonical storage location of the mac address, so
we're killing off the global data location and moving everything to
querying the env directly.

Rather than have common ppc code call a board-specific function like
load_sernum_ethaddr(), have each board call it in its own board-specific
misc_init_r() function.

The boards that get converted here are:
	- kup4k/kup4x
	- pcs440ep
	- tqm8xx
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
CC: Ben Warren <biggerbadderben@gmail.com>
CC: Stefan Roese <sr@denx.de>

The environment is the canonical storage location of the mac address, so
we're killing off the global data location and moving everything to
querying the env directly.

Also rename load_sernum_ethaddr() to misc_init_r() so we don't need to
handle this board specially in common ARM code.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
CC: Ben Warren <biggerbadderben@gmail.com>

The environment is the canonical storage location of the mac address, so
we're killing off the global data location and moving everything to
querying the env directly.

Rather than have the common ppc code have board-specific hooks, move the
board_get_enetaddr() function into the board-specific init functions.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
CC: Ben Warren <biggerbadderben@gmail.com>

The environment is the canonical storage location of the mac address, so
we're killing off the global data location and moving everything to
querying the env directly.

Some warts are remaining and should be killed off (by moving the func to
the appropriate board init code):
	- davinci_eth_set_mac_addr
	- cs8900_get_enetaddr
	- smc_set_mac_addr
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
CC: Ben Warren <biggerbadderben@gmail.com>

The environment is the canonical storage location of the mac address, so
we're killing off the global data location and moving everything to
querying the env directly.

For the nx823, the serial number is moved out of load_sernum_ethaddr() and
into misc_init_r() as is the env setup.  This lets us kill off the former
function in the process.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
CC: Ben Warren <biggerbadderben@gmail.com>