There are a number of platforms that depend on a SATA driver that has
been converted to require AHCI but the platforms themselves are behind
on other migrations that would make it trivial to enable AHCI.  Disable
SATA in these cases.
Signed-off-by: NTom Rini <trini@konsulko.com>

These boards have not been converted to CONFIG_DM_MMC by the deadline.
Remove them.  As the P5020 is the last ARCH_P5020 platform, remove that
support as well.

Cc: Andy Fleming <afleming@gmail.com>
Cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

With the last of the ARCH_P1022 platforms removed, finish removing the
rest of the platform support.

Cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

These boards have not been converted to CONFIG_DM_MMC by the deadline.
Remove them.

Cc: Mario Six <mario.six@gdsys.cc>
Cc: Dirk Eibach <dirk.eibach@gdsys.cc>
Signed-off-by: NTom Rini <trini@konsulko.com>

This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.  It is also the only ARCH_T2081 board so remove that support
as well.

Cc: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Cc: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: NTom Rini <trini@konsulko.com>

board/emulation is the place for other QEMU targets like x86, arm,
riscv. Let's move the qemu-ppce500 board codes there.

List me as a co-maintainer for this board.
Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Moves below via specific defines to Kconfig:

	CONFIG_FSL_VIA
Signed-off-by: NRajesh Bhagat <rajesh.bhagat@nxp.com>
[Rebased]
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.  As this is the last ARCH_MPC8569 board, remove that support
as well.

Cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI.  The
deadline for this conversion was the v2019.07 release.  The use of CONFIG_AHCI
requires CONFIG_DM.  The deadline for this conversion was v2020.01.  Remove
this board.

Cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI.  The
deadline for this conversion was the v2019.07 release.  The use of CONFIG_AHCI
requires CONFIG_DM.  The deadline for this conversion was v2020.01.  Remove
this board.

Cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Add basic support for the Hitachi Power Grids kmcent2 board, based
on the NXP QorIQ T1040 SoC.
Signed-off-by: NValentin Longchamp <valentin.longchamp@hitachi-powergrids.com>
Signed-off-by: NRainer Boschung <rainer.boschung@hitachi-powergrids.com>
Signed-off-by: NNiel Fourie <lusus@denx.de>
Cc: Holger Brunck <holger.brunck@hitachi-powergrids.com>
Cc: Heiko Schocher <hs@denx.de>
Reviewed-by: NStefan Roese <sr@denx.de>
[Fixed blank line at EOF errors]
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

Remove NXP powerpc P5020DS board support as it is no
longer maintained.
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

Remove NXP powerpc P1024RDB board support as it is no
longer maintained.
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

Remove NXP powerpc P1021RDB board support as it is no
longer maintained.
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

Remove NXP powerpc P1020MBG board support as it is no
longer maintained.
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

Remove NXP powerpc P1020UTM board support as it is no
longer maintained.
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

Remove NXP powerpc P1025RDB board support as it is no
longer maintained.
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

Remove NXP powerpc p1023rdb board support as it is no
longer maintained.
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

DM_SPI and other driver model migration deadlines
are expired for this board.

Remove it.

Patch-cc: Xiaobo Xie <xiaobo.xie@nxp.com>
Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

DM_SPI and other driver model migration deadlines
are expired for this board.

Remove it.

Patch-cc: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

DM_SPI and other driver model migration deadlines
are expired for this board.

Remove it.

Patch-cc: Poonam Aggrwal <poonam.aggrwal@nxp.com>
Patch-cc: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

DM_SPI and other driver model migration deadlines
are expired for this board.

Remove it.
Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>

DM_SPI and other driver model migration deadlines
are expired for this board.

Remove it.

Patch-cc: Timur Tabi <timur@tabi.org>
Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

DM_SPI and other driver model migration deadlines
are expired for this board.

Remove it.

Patch-cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

DM_SPI and other driver model migration deadlines
are expired for this board.

Remove it.

Patch-cc: Po Liu <po.liu@nxp.com>
Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

DM_SPI and other driver model migration deadlines
are expired for this board.

Remove it.

Patch-cc: Naveen Burmi <naveen.burmi@nxp.com>
Patch-cc: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

DM_SPI and other driver model migration deadlines
are expired for this board.

Remove it.

Patch-cc: Poonam Aggrwal <poonam.aggrwal@nxp.com>
Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

DM_SPI and other driver model migration deadlines
are expired for this board.

Remove it.

Patch-cc: Ashish Kumar <ashish.kumar@nxp.com>
Patch-cc: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Move errata A008109, A008378, 009942 workaround implementation from
compute_fsl_memctl_config_regs() to  fsl_ddr_set_memctl_regs()
and add register write after each workaround implementation.
Signed-off-by: NJaiprakash Singh <Jaiprakash.singh@nxp.com>
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

Impl. erratum as descibed in errata doc.
Enable A008109 for T1040 and T1024
Signed-off-by: NJoakim Tjernlund <joakim.tjernlund@infinera.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

This reverts commit 856b9cdb.

Commit 856b9cdb ("powerpc: mpc85xx: delete FSL_SATA for T2080QDS
board.") is to fit support sata DM mode, Now the driver will be reverted,
So revert it.
Signed-off-by: NPeng Ma <peng.ma@nxp.com>
Reviewed-by: NStefan Roese <sr@denx.de>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Rename the CONFIG_SECURE_BOOT name to CONFIG_NXP_ESBC to avoid
conflicts with UEFI secure boot.
Signed-off-by: NUdit Agarwal <udit.agarwal@nxp.com>
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

As preparation for the upcoming transferring of configurations from header
files to Kconfig, a common Kconfig file for all KM boards was created. For
the moment, it only sources the other three, more specific, Kconfig files.
Therefore, the architecture Kconfig files now include the common Kconfig
file. Also, the configuration selection for KM boards was moved from the
architecture Kconfig files to the board specific Kconfig files.
Signed-off-by: NPascal Linder <pascal.linder@edu.hefr.ch>
Signed-off-by: NHolger Brunck <holger.brunck@ch.abb.com>
Cc: Mario Six <mario.six@gdsys.cc>
Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Signed-off-by: NStefan Roese <sr@denx.de>

Use the Kconfig option to select the PCIe reset errata.
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

Use the Kconfig option to select the PCIe ASPM errata.
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

Signed-off-by: NPeng Ma <peng.ma@nxp.com>
Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

Moves below DDR specific defines to Kconfig:

CONFIG_FSL_DDR_BIST
CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
CONFIG_FSL_DDR_INTERACTIVE
CONFIG_FSL_DDR_SYNC_REFRESH
Signed-off-by: NRajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>
Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

Workaround makes FS as default mode on all affected socs.

Add support to check erratum-A005275 validity for an soc. This info is
required to determine whether a given soc is affected by this erratum.
Add quirk for this erratum "has_fsl_erratum_a005275" . This quirk is used
to enable workaround for the errata

Force FS mode as default by:
        - making EPS as FS
        - setting PFSC bit to disable HS chirping

This workaround can be disabled by mentioning "no_erratum_a005275" in
hwconfig string
Signed-off-by: NChris Packham <judge.packham@gmail.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>

Below is the sequence to embed dtb inside U-Boot,
1. Remove bootpg and resetvec section if needed
2. Append dtb
3. Append bootpg and resetvec section back if removed in step 1

Above procedure is required only when CONFIG_MPC85xx and
CONFIG_OF_SEPARATE are defined.

Add new config CONFIG_MPC85XX_HAVE_RESET_VECTOR to indicate that
image has resetvec section. Step 1 and step 3 described above are
required only if this config is y.
Signed-off-by: NJagdish Gediya <jagdish.gediya@nxp.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NYork Sun <york.sun@nxp.com>

Freescale (NXP) boards have lots of defconfig files per board.
I used "imply PANIC_HANG" for them.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>