- 23 3月, 2018 11 次提交
-
-
由 Faiz Abbas 提交于
With DM enabled in SPL, DM_FLAG_PRE_RELOC is required for the omap_gpio driver to be bound to the gpio devices. Therefore, add DM_FLAG_PRE_RELOC flag to the omap_gpio driver. Signed-off-by: NFaiz Abbas <faiz_abbas@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Luca Ceresoli 提交于
scripts/check-config.sh exits successfully and silently without doing any checks when the 'comm' command is not found. The problem triggers from the command around line 39: comm -23 ${suspects} ${ok} >${new_adhoc} This statement fails when 'comm' is not in $PATH, creating an empty ${new_adhoc} file. But the script continues and the following line, which is supposed to detect an error: if [ -s ${new_adhoc} ]; then will always be false since the file is empty, and the script will exit successfully as if everything were OK. The case where 'comm' in not in $PATH is not theoretical. It used to happen on yocto until a recent fix [0], and still happens on the current stable branch (rocko). Fix by setting the errexit flag to exit with error when a statement fails, so that at least the problem is noticed. For additional safety also set the nounset flag to detect expansion errors. [0] http://git.yoctoproject.org/cgit/cgit.cgi/poky/commit/?id=fe0b4cb5b48580d4a3f3c0eb82bfa6f1b13801e4Signed-off-by: NLuca Ceresoli <luca@lucaceresoli.net> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 David Lechner 提交于
commit 1601dd97 ("davinci: omapl138_lcdk: increase PLL0 frequency") changed the PLL0 frequency to 456MHz, which is needed for the LCDC IP block. However, in doing so, it caused the PLLOUT clock to be outside of the allowable specifications given in the OMAP-L138 data sheet. (It says PLLOUT must be 600MHz max). It also uses a PLLM value outside of the range given in the TRM (it says PLLM must in the range 0 to 0x1f). So here is what we have currently: PLLOUT = 24 / (0 + 1) * (37 + 1) = 912MHz (out of spec) ^ ^ ^ CLKIN PREDIV PLLM (out of spec) input to PLLDIVn = 912 / (1 + 1) = 456MHz (desired result) ^ ^ PLLOUT POSTDIV This changes the PLLM value to 18 and the POSTDIV value to 0 so that PLLOUT is now within specification but we still get the desired result. PLLOUT = 24 / (0 + 1) * (18 + 1) = 456MHz (within spec) ^ ^ ^ CLKIN PREDIV PLLM input to PLLDIVn = 456 / (0 + 1) = 456MHz (desired result) ^ ^ PLLOUT POSTDIV Fixes: 1601dd97 ("davinci: omapl138_lcdk: increase PLL0 frequency") Signed-off-by: NDavid Lechner <david@lechnology.com> Reported-by: NSekhar Nori <nsekhar@ti.com> Tested-by: NSekhar Nori <nsekhar@ti.com>
-
由 Liam Beguin 提交于
Add basic tests for the spi_flash subsystem. Signed-off-by: NLiam Beguin <liambeguin@gmail.com> Reviewed-by: NStephen Warren <swarren@nvidia.com>
-
由 Liam Beguin 提交于
Add a generic function which can be used to compute the CRC32 value of a region of RAM. Signed-off-by: NLiam Beguin <liambeguin@gmail.com> Reviewed-by: NStephen Warren <swarren@nvidia.com>
-
由 Liam Beguin 提交于
Signed-off-by: NLiam Beguin <liambeguin@gmail.com> Reviewed-by: NStephen Warren <swarren@nvidia.com>
-
由 Liam Beguin 提交于
As opposed to PATH, HOSTNAME is not appended to PYTHONPATH automatically. Lets add it to the examples to make it more obvious to new users. Signed-off-by: NLiam Beguin <liambeguin@gmail.com> Reviewed-by: NStephen Warren <swarren@nvidia.com>
-
由 Liam Beguin 提交于
Fix a minor typo causing vim (and possibly other) to get confused with coloring. Signed-off-by: NLiam Beguin <liambeguin@gmail.com> Reviewed-by: NStephen Warren <swarren@nvidia.com>
-
由 Liam Beguin 提交于
Make sure 0x00 is a valid address to read to. If `addr` is 0x00 then map_physmem() will return 0 which should be a valid address. Signed-off-by: NLiam Beguin <liambeguin@gmail.com> Reviewed-by: NStephen Warren <swarren@nvidia.com>
-
由 Liam Beguin 提交于
Make sure the user is notified instead of silently returning an error. Signed-off-by: NLiam Beguin <liambeguin@gmail.com> Reviewed-by: NStephen Warren <swarren@nvidia.com>
-
由 Tuomas Tynkkynen 提交于
The kwboot tool for Marvell devices isn't currently being built even if HOST_TOOLS_ALL is set. It doesn't appear to depend on any CONFIG_ options, so it seems appropriate to enable building it here. Signed-off-by: NTuomas Tynkkynen <tuomas@tuxera.com>
-
- 22 3月, 2018 25 次提交
-
-
-
由 Álvaro Fernández Rojas 提交于
Signed-off-by: NÃlvaro Fernández Rojas <noltari@gmail.com>
-
由 Álvaro Fernández Rojas 提交于
Signed-off-by: NÃlvaro Fernández Rojas <noltari@gmail.com>
-
由 Álvaro Fernández Rojas 提交于
Signed-off-by: NÃlvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
由 Álvaro Fernández Rojas 提交于
Signed-off-by: NÃlvaro Fernández Rojas <noltari@gmail.com>
-
由 Álvaro Fernández Rojas 提交于
Signed-off-by: NÃlvaro Fernández Rojas <noltari@gmail.com>
-
由 Álvaro Fernández Rojas 提交于
Signed-off-by: NÃlvaro Fernández Rojas <noltari@gmail.com>
-
由 Álvaro Fernández Rojas 提交于
Signed-off-by: NÃlvaro Fernández Rojas <noltari@gmail.com>
-
由 Álvaro Fernández Rojas 提交于
Signed-off-by: NÃlvaro Fernández Rojas <noltari@gmail.com>
-
由 Álvaro Fernández Rojas 提交于
Signed-off-by: NÃlvaro Fernández Rojas <noltari@gmail.com>
-
由 Álvaro Fernández Rojas 提交于
Signed-off-by: NÃlvaro Fernández Rojas <noltari@gmail.com>
-
由 Álvaro Fernández Rojas 提交于
Signed-off-by: NÃlvaro Fernández Rojas <noltari@gmail.com>
-
由 Álvaro Fernández Rojas 提交于
Signed-off-by: NÃlvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
由 Álvaro Fernández Rojas 提交于
Signed-off-by: NÃlvaro Fernández Rojas <noltari@gmail.com>
-
由 Álvaro Fernández Rojas 提交于
Signed-off-by: NÃlvaro Fernández Rojas <noltari@gmail.com>
-
由 Álvaro Fernández Rojas 提交于
Signed-off-by: NÃlvaro Fernández Rojas <noltari@gmail.com>
-
由 Álvaro Fernández Rojas 提交于
Signed-off-by: NÃlvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
由 Álvaro Fernández Rojas 提交于
Signed-off-by: NÃlvaro Fernández Rojas <noltari@gmail.com>
-
由 Álvaro Fernández Rojas 提交于
Signed-off-by: NÃlvaro Fernández Rojas <noltari@gmail.com>
-
由 Álvaro Fernández Rojas 提交于
Signed-off-by: NÃlvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
由 Heinrich Schuchardt 提交于
If we check an index against array bounds, we should do so before accessing the array and not afterwards. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Álvaro Fernández Rojas 提交于
Signed-off-by: NÁlvaro Fernández Rojas <noltari@gmail.com>
-
由 Álvaro Fernández Rojas 提交于
Signed-off-by: NÁlvaro Fernández Rojas <noltari@gmail.com>
-
由 Álvaro Fernández Rojas 提交于
Signed-off-by: NÁlvaro Fernández Rojas <noltari@gmail.com>
-
由 Álvaro Fernández Rojas 提交于
Signed-off-by: NÁlvaro Fernández Rojas <noltari@gmail.com>
-
- 21 3月, 2018 1 次提交
-
-
- 20 3月, 2018 3 次提交
-
-
由 Vinitha V Pillai 提交于
Fix NOR, SD and QSPI fallback option in case of secure boot failure. Signed-off-by: NVinitha V Pillai <vinitha.pillai@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Ashish Kumar 提交于
IFC-NOR and QSPI-NOR pins are multiplexed on SoC, so they cannot be accessed simultaneously. IFC-NOR can be accessed along with SD-BOOT. Ls1088aqds_sdcard_ifc_defconfig is default config for SD boot and IFC-NOR to be used as flash. This allows writing to IFC-NOR flash. QSPI and DSPI cannot be accessed in this defconfig. IFC-NOR image is generated using ls1088aqds_defconfig. Signed-off-by: NAshish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Ashish Kumar 提交于
This function is required for enabling access to early i2c function for correct usage of QIXIS_READ and QIXIS_WRITE. Signed-off-by: NAshish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-