- 24 9月, 2020 7 次提交
-
-
由 Priyanka Jain 提交于
Remove NXP powerpc P5020DS board support as it is no longer maintained. Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Priyanka Jain 提交于
Remove NXP powerpc P1024RDB board support as it is no longer maintained. Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Priyanka Jain 提交于
Remove NXP powerpc P1021RDB board support as it is no longer maintained. Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Priyanka Jain 提交于
Remove NXP powerpc P1020MBG board support as it is no longer maintained. Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Priyanka Jain 提交于
Remove NXP powerpc P1020UTM board support as it is no longer maintained. Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Priyanka Jain 提交于
Remove NXP powerpc P1025RDB board support as it is no longer maintained. Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Priyanka Jain 提交于
Remove NXP powerpc p1023rdb board support as it is no longer maintained. Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
- 19 6月, 2020 10 次提交
-
-
由 Jagan Teki 提交于
DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Patch-cc: Xiaobo Xie <xiaobo.xie@nxp.com> Signed-off-by: NJagan Teki <jagan@amarulasolutions.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Jagan Teki 提交于
DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Patch-cc: Ruchika Gupta <ruchika.gupta@nxp.com> Signed-off-by: NJagan Teki <jagan@amarulasolutions.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Jagan Teki 提交于
DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Patch-cc: Poonam Aggrwal <poonam.aggrwal@nxp.com> Patch-cc: Ruchika Gupta <ruchika.gupta@nxp.com> Signed-off-by: NJagan Teki <jagan@amarulasolutions.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Jagan Teki 提交于
DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>
-
由 Jagan Teki 提交于
DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Patch-cc: Timur Tabi <timur@tabi.org> Signed-off-by: NJagan Teki <jagan@amarulasolutions.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Jagan Teki 提交于
DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Patch-cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: NJagan Teki <jagan@amarulasolutions.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Jagan Teki 提交于
DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Patch-cc: Po Liu <po.liu@nxp.com> Signed-off-by: NJagan Teki <jagan@amarulasolutions.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Jagan Teki 提交于
DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Patch-cc: Naveen Burmi <naveen.burmi@nxp.com> Patch-cc: Ruchika Gupta <ruchika.gupta@nxp.com> Signed-off-by: NJagan Teki <jagan@amarulasolutions.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Jagan Teki 提交于
DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Patch-cc: Poonam Aggrwal <poonam.aggrwal@nxp.com> Signed-off-by: NJagan Teki <jagan@amarulasolutions.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Jagan Teki 提交于
DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Patch-cc: Ashish Kumar <ashish.kumar@nxp.com> Patch-cc: Ruchika Gupta <ruchika.gupta@nxp.com> Signed-off-by: NJagan Teki <jagan@amarulasolutions.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
- 04 6月, 2020 2 次提交
-
-
由 Jaiprakash Singh 提交于
Move errata A008109, A008378, 009942 workaround implementation from compute_fsl_memctl_config_regs() to fsl_ddr_set_memctl_regs() and add register write after each workaround implementation. Signed-off-by: NJaiprakash Singh <Jaiprakash.singh@nxp.com> Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Joakim Tjernlund 提交于
Impl. erratum as descibed in errata doc. Enable A008109 for T1040 and T1024 Signed-off-by: NJoakim Tjernlund <joakim.tjernlund@infinera.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
- 25 2月, 2020 1 次提交
-
-
由 Peng Ma 提交于
This reverts commit 856b9cdb. Commit 856b9cdb ("powerpc: mpc85xx: delete FSL_SATA for T2080QDS board.") is to fit support sata DM mode, Now the driver will be reverted, So revert it. Signed-off-by: NPeng Ma <peng.ma@nxp.com> Reviewed-by: NStefan Roese <sr@denx.de> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
- 08 11月, 2019 1 次提交
-
-
由 Udit Agarwal 提交于
Rename the CONFIG_SECURE_BOOT name to CONFIG_NXP_ESBC to avoid conflicts with UEFI secure boot. Signed-off-by: NUdit Agarwal <udit.agarwal@nxp.com> Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
- 11 7月, 2019 1 次提交
-
-
由 Pascal Linder 提交于
As preparation for the upcoming transferring of configurations from header files to Kconfig, a common Kconfig file for all KM boards was created. For the moment, it only sources the other three, more specific, Kconfig files. Therefore, the architecture Kconfig files now include the common Kconfig file. Also, the configuration selection for KM boards was moved from the architecture Kconfig files to the board specific Kconfig files. Signed-off-by: NPascal Linder <pascal.linder@edu.hefr.ch> Signed-off-by: NHolger Brunck <holger.brunck@ch.abb.com> Cc: Mario Six <mario.six@gdsys.cc> Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
- 20 6月, 2019 2 次提交
-
-
由 Hou Zhiqiang 提交于
Use the Kconfig option to select the PCIe reset errata. Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
-
由 Hou Zhiqiang 提交于
Use the Kconfig option to select the PCIe ASPM errata. Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
-
- 23 5月, 2019 1 次提交
-
-
由 Peng Ma 提交于
Signed-off-by: NPeng Ma <peng.ma@nxp.com> Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
-
- 03 3月, 2019 1 次提交
-
-
由 Rajesh Bhagat 提交于
Moves below DDR specific defines to Kconfig: CONFIG_FSL_DDR_BIST CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE CONFIG_FSL_DDR_INTERACTIVE CONFIG_FSL_DDR_SYNC_REFRESH Signed-off-by: NRajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com> Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
-
- 30 10月, 2018 1 次提交
-
-
由 Chris Packham 提交于
Workaround makes FS as default mode on all affected socs. Add support to check erratum-A005275 validity for an soc. This info is required to determine whether a given soc is affected by this erratum. Add quirk for this erratum "has_fsl_erratum_a005275" . This quirk is used to enable workaround for the errata Force FS mode as default by: - making EPS as FS - setting PFSC bit to disable HS chirping This workaround can be disabled by mentioning "no_erratum_a005275" in hwconfig string Signed-off-by: NChris Packham <judge.packham@gmail.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
- 28 9月, 2018 1 次提交
-
-
由 Jagdish Gediya 提交于
Below is the sequence to embed dtb inside U-Boot, 1. Remove bootpg and resetvec section if needed 2. Append dtb 3. Append bootpg and resetvec section back if removed in step 1 Above procedure is required only when CONFIG_MPC85xx and CONFIG_OF_SEPARATE are defined. Add new config CONFIG_MPC85XX_HAVE_RESET_VECTOR to indicate that image has resetvec section. Step 1 and step 3 described above are required only if this config is y. Signed-off-by: NJagdish Gediya <jagdish.gediya@nxp.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
- 27 12月, 2017 1 次提交
-
-
由 Masahiro Yamada 提交于
Freescale (NXP) boards have lots of defconfig files per board. I used "imply PANIC_HANG" for them. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
- 13 12月, 2017 2 次提交
-
-
由 Tuomas Tynkkynen 提交于
Use 'imply' here liberally to avoid the combinatorial explosion of defconfig changes in the PowerPC boards. Signed-off-by: NTuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
-
由 Tuomas Tynkkynen 提交于
Use 'imply' here liberally to avoid the combinatorial explosion of defconfig changes in the PowerPC boards. Signed-off-by: NTuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
-
- 16 8月, 2017 1 次提交
-
-
由 Simon Glass 提交于
At present we support multiple environment drivers but there is not way to select between them at run time. Also settings related to the position and size of the environment area are global (i.e. apply to all locations). Until these limitations are removed we cannot really support more than one environment location. Adjust the location to be a choice so that only one can be selected. By default the environment is 'nowhere', meaning that the environment exists only in memory and cannot be saved. Also expand the help for the 'nowhere' option and move it to the top since it is the default. Signed-off-by: NSimon Glass <sjg@chromium.org> [trini: Move all of the imply logic to default X if Y so it works again] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 12 8月, 2017 2 次提交
-
-
由 Christophe Leroy 提交于
This patch converts CONFIG_CMD_REGINFO to Kconfig Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_CMD_PCI Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
- 01 8月, 2017 1 次提交
-
-
由 Tom Rini 提交于
Migrate all remaining instances of CMD_NAND, CMD_NAND_TRIMFFS CMD_NAND_LOCK_UNLOCK and CMD_NAND_TORTURE from the headers into the defconfig files. Tested-by: NAdam Ford <aford173@gmail.com> Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
- 26 7月, 2017 1 次提交
-
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_ENV_IS_IN_FLASH Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 25 7月, 2017 1 次提交
-
-
由 Tom Rini 提交于
The above CONFIG options are in Kconfig, and now have correct depends and inter-dependencies. Migrate these to configs/ from include/configs/. In the case of CMD_UBIFS also change it to be a default y if CMD_UBI. Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 12 7月, 2017 2 次提交
-
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_CMD_SATA Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_SCSI Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
- 13 6月, 2017 1 次提交
-
-
由 York Sun 提交于
Drop support for these two legacy boards. Signed-off-by: NYork Sun <york.sun@nxp.com>
-