- 18 8月, 2018 3 次提交
-
-
由 Adam Ford 提交于
This converts the following to Kconfig: CONFIG_MISC_INIT_R Signed-off-by: NAdam Ford <aford173@gmail.com> [trini: Update the defaults logic slightly] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Alex Kiernan 提交于
Migrate boards which set bootlimit in the environment to Kconfig. We exclude gurnard_defconfig which includes a bootlimit=, but doesn't set CONFIG_BOOTCOUNT_LIMIT, so we'd fail to include a bootlimit setting if we migrated it. display5_defconfig and display5_factory_defconfig share a SYS_CONFIG_NAME, but only display5_defconfig enables CONFIG_BOOTCOUNT_LIMIT, so we fail to set bootlimit= in display5_factory_defconfig. This is okay because the display5_factory_defconfig doesn't need to have it set, as it is only meant to prepare the board in the factory. Environment changes for all modified configs as seen from buildman: boards.cfg is up to date. Nothing to do. Summary of 3 commits for 32 boards (8 threads, 1 job per thread) 01: Merge git://git.denx.de/u-boot-x86 arm: + draco etamin rastaban pxm2 display5 thuban rut 02: Add BOOTCOUNT_BOOTLIMIT to set reboot limit 03: Migrate bootlimit to Kconfig - display5_factory: bootlimit=3 Signed-off-by: NAlex Kiernan <alex.kiernan@gmail.com> Reviewed-by: NLukasz Majewski <lukma@denx.de>
-
由 Adam Ford 提交于
This converts the following to Kconfig: CONFIG_MII CONFIG_DRIVER_TI_EMAC Signed-off-by: NAdam Ford <aford173@gmail.com> Acked-by: NJagan Teki <jagan@amarulasolutions.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
- 17 8月, 2018 1 次提交
-
-
由 Tom Rini 提交于
We have the following cases: - CONFIG_NR_DRAM_BANKS was defined, migrate normally - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for CONFIG_NR_DRAM_BANKS after a check, just migrate it over now. - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 + 2), set this to 8. Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 14 8月, 2018 10 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Marek Vasut 提交于
Enable DM ethernet framework on Arria10, so that the designware GMAC can be probed from DT as it should be. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Ley Foon Tan <ley.foon.tan@intel.com>
-
由 Derald D. Woods 提交于
This commit enables CONFIG_BLK and removes USB_STORAGE which is awaiting proper implementation for current U-Boot interfaces. Additionally the console selection is now handled by Kconfig and no longer needs to be in the config header. CONFIG_SYS_MALLOC_F_LEN=0x2000 was added to sync with other boards. CONFIG_SPL_BLK and CONFIG_SPL_DM_MMC are disabled because they currently do not allow the OMAP3-EVM (OMAP34XX) to actually boot. Signed-off-by: NDerald D. Woods <woods.technical@gmail.com>
-
由 Ramon Fried 提交于
1. Add FIT support for DB410c defconfig. 2. Don't overwrite bootargs (they're already defined in Linux device tree for DB410c. Signed-off-by: NRamon Fried <ramon.fried@gmail.com>
-
由 Patrice Chotard 提交于
Add DISTRO_DEFAULT support to be able to boot on mmc by default on boot. Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Patrice Chotard 提交于
Add DISTRO_DEFAULT support to be able to boot on mmc by default on boot. Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Patrice Chotard 提交于
Add DISTRO_DEFAULT support to be able to boot on mmc by default on boot. Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Patrice Chotard 提交于
Add DISTRO_DEFAULT support to be able to boot on mmc by default on boot. Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Patrice Chotard 提交于
Remove CONFIG_CMD_CACHE from include/configs/stm32h7xx.h and enable it in stm32h7xx_defconfig Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Patrice Chotard 提交于
Remove CONFIG_CMD_CACHE from include/configs/stm32f746-disco.h and enable it in stm32f746-disco_defconfig Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
-
- 11 8月, 2018 3 次提交
-
-
由 Mario Six 提交于
Add test AXI drivers to the sandbox. Reviewed-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
由 Adam Ford 提交于
For these boards, the GPMC timings are more determined by processor speed/type than the NAND/PoP memory. This code is never invoked, so disable the config option, so it doesn't take the time to compile it in. Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Adam Ford 提交于
The console index for SPL should be 1 not 3 in order to see text during SPL. Fixes: 6f6b7cfa ("Convert all of CONFIG_CONS_INDEX to Kconfig") Signed-off-by: NAdam Ford <aford173@gmail.com>
-
- 10 8月, 2018 1 次提交
-
-
由 Patrick Delaunay 提交于
This patch add the 4 LED available on the ED1 board and activated gpio led driver. Reviewed-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
- 08 8月, 2018 5 次提交
-
-
由 Philippe Reynes 提交于
This add the initial support of the broadcom reference board bcm968380gerg with a bcm68380 SoC. This board has 512 MB of RAM, 128 MB of flash (nand), 2 USB port, 1 UART, 4 ethernet ports and BCM43217 (wifi). Signed-off-by: NPhilippe Reynes <philippe.reynes@softathome.com> Reviewed-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
由 Tom Rini 提交于
The only platform left for the AU1x00 SoCs was the pb1x00 platform, an apparent clone of the dbau1x00 platform. As pb1x00 had no listed maintainer I am assuming that it is also orphaned. Remove this platform and then remove the unused SoC support. Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
由 Tom Rini 提交于
This platform has been marked as orphan since June of 2016 and should have been removed some time ago. Do so now. Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Vinitha V Pillai 提交于
Signed-off-by: NVinitha V Pillai <vinitha.pillai@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
- 07 8月, 2018 3 次提交
-
-
由 Chris Packham 提交于
This is a series of line cards for Allied Telesis's SBx8100 chassis switch. The CPU block is common to the SBx81GP24 and SBx81GT24 cards cards collectively referred to as SBx81LIFXCAT in u-boot. Signed-off-by: NChris Packham <judge.packham@gmail.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Chris Packham 提交于
Now that there is DM support in the RTC_MV driver update board configs to use it. Signed-off-by: NChris Packham <judge.packham@gmail.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Chris Packham 提交于
Enable DM_I2C and I2C_MVTSWI for the ds109 board. Signed-off-by: NChris Packham <judge.packham@gmail.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
- 06 8月, 2018 8 次提交
-
-
由 Baruch Siach 提交于
Move the gdsys Controlcenter DC specific build time kwbimage.cfg generation code into the mach-mvebu/ directory to be shared by all 32bit mvebu platforms. Remove board specific kwbimage.cfg files, and use the generated one instead. These files are all identical, with two exceptions. Clearfog and Helios4 use the sdio boot device, whereas all others use spi. Update the defconfigs for the exceptional boards to generate the same kwbimage.cfg as before. Signed-off-by: NBaruch Siach <baruch@tkos.co.il> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Michal Simek 提交于
Avnet Ultra96 is rebranded Xilinx zcu100 revC/D. Add new defconfig files and point to origin internal board name. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Luis Araneda 提交于
The board is manufactured by Digilent Main features: - Soc: XC7Z010 (Z7-10) or XC7Z020 (Z7-20) - RAM: 1 GB DDR3L - FLASH: 16 MB QSPI - 1 Gbps Ethernet - USB 2.0 - microSD slot - Pcam camera connector - HDMI Tx and Rx - Audio codec: stereo out, stereo in, mic - 5 (Z7-10) or 6 (Z7-20) Pmod ports - 6 push-buttons, 4 switches, 5 LEDs - 1 (Z7-10) or 2 (Z7-20) RGB LEDs Signed-off-by: NLuis Araneda <luaraneda@gmail.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
This patch moves the the config SYS_MALLOC_LEN to Kconfig. It will be just for Zynq arch and to do will be for all other archs. Signed-off-by: NSiva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: NVipul Kumar <vipul.kumar@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Enable soft gpio driver for zcu102 and zcu100. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Add ISSI to Kconfig to make it selectable via menuconfig. Also convert all current platforms. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Lukasz Majewski 提交于
This commit enables support for DW_MMC running with driver model. Signed-off-by: NLukasz Majewski <lukma@denx.de> Tested-by: NAnand Moon <linux.amoon@gmail.com> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Lukasz Majewski 提交于
The Exynos5422 is solely using DW MMC IP block to support eMMC/SD devices, hence the SDHCI code doesn't need to be compiled it. Signed-off-by: NLukasz Majewski <lukma@denx.de> Tested-by: NAnand Moon <linux.amoon@gmail.com> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
- 04 8月, 2018 4 次提交
-
-
由 Patrice Chotard 提交于
CONFIG_BLK config flag becomes mandatory, enable it. Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Patrice Chotard 提交于
CONFIG_BLK config flag becomes mandatory, enable it. Signed-off-by: NPatrice Chotard <patrice.chotard@st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Patrice Chotard 提交于
CONFIG_BLK config flag becomes mandatory, enable it. Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Fabrice Gasnier 提交于
Enable ADC on stm32mp15. - CONFIG_CMD_ADC - CONFIG_STM32_ADC Signed-off-by: NFabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 31 7月, 2018 2 次提交
-
-
由 Jagan Teki 提交于
OrangePi One Plus is Allwinner H6 based open-source SBC, which support: - Allwinner H6 Quad-core 64-bit ARM Cortex-A53 - GPU Mali-T720 - 1GB LPDDR3 RAM - AXP805 PMIC - 1Gbps GMAC via RTL8211 - USB 2.0 Host, OTG - HDMI port - 5V/2A DC power supply Signed-off-by: NJagan Teki <jagan@amarulasolutions.com> Acked-by: NMaxime Ripard <maxime.ripard@bootlin.com>
-
由 Icenowy Zheng 提交于
Pine H64 is a SBC with Allwinner H6 SoC produced by Pine64. It features 1GiB/2GiB/4GiB(3GiB usable) DRAM, two USB 2.0 ports, one USB 3.0 port and a mPCIE slot. Add support for it. The device tree is from Linux next-20180720. Signed-off-by: NIcenowy Zheng <icenowy@aosc.io> Acked-by: NMaxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: NJagan Teki <jagan@openedev.com> Tested-by: NJagan Teki <jagan@amarulasolutions.com>
-