- 26 7月, 2014 32 次提交
-
-
由 Rajendra Nayak 提交于
The errata is applicable on all OMAP4 (4430 and 4460/4470) and OMAP5 ES 1.0 devices. The current revision check erroneously implements this on all DRA7 varients and with DRA722 device (which has only 1 EMIF instance) infact causes an asynchronous abort and ends up masking it in CPSR, only to be uncovered once the kernel switches to userspace. Signed-off-by: NRajendra Nayak <rnayak@ti.com> Signed-off-by: NSricharan R <r.sricharan@ti.com> Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 Hao Zhang 提交于
This patch adds Keystone2 k2e_evm evaluation board support. Signed-off-by: NHao Zhang <hzhang@ti.com> Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>
-
由 Khoronzhuk, Ivan 提交于
Keystone2 K2E SoC has slightly different spl pll settings then K2HK, so correct this. Acked-by: NMurali Karicheri <m-karicheri2@ti.com> Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>
-
由 Khoronzhuk, Ivan 提交于
Use CONFIG_SOC_KEYSTONE in common places instead of defining a lot of "if def .. || if def " for different Keystone2 SoC types. Acked-by: NMurali Karicheri <m-karicheri2@ti.com> Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>
-
由 Hao Zhang 提交于
This patch adds Keystone2 K2E SOC specific code to support MSMC cache coherency. Also create header file for msmc to hold its API. Acked-by: NMurali Karicheri <m-karicheri2@ti.com> Signed-off-by: NHao Zhang <hzhang@ti.com> Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>
-
由 Hao Zhang 提交于
This patch adds clock definitions and commands to support Keystone2 K2E SOC. Signed-off-by: NHao Zhang <hzhang@ti.com> Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>
-
由 Hao Zhang 提交于
This patch adds hardware definitions specific to Keystone II K2E device. It has a lot common definitions with k2hk SoC, so move them to common hardware.h. This is preparation patch for adding K2E SoC support. Acked-by: NMurali Karicheri <m-karicheri2@ti.com> Signed-off-by: NHao Zhang <hzhang@ti.com> Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>
-
由 Hao Zhang 提交于
It's convenient to hold configurations for DDR3 PHY and EMIF in separate common place. This patch moves K2HK DDR3 PHY and EMIF configuration data with different rates and memory size to a common ddr3_cfg.c file. Acked-by: NMurali Karicheri <m-karicheri2@ti.com> Signed-off-by: NHao Zhang <hzhang@ti.com> Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>
-
由 Hao Zhang 提交于
This patch adds a common config header file for all the Keystone II EVM platforms. It combines a lot of general definitions in one file. The common header included in the EVM should be specific configuration header. Acked-by: NMurali Karicheri <m-karicheri2@ti.com> Signed-off-by: NHao Zhang <hzhang@ti.com> Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>
-
由 Khoronzhuk, Ivan 提交于
This patch in general spit SoC type clock dependent code and general clock code. Before adding keystone II Edison k2e SoC which has slightly different dpll set, move k2hk dependent clock code to separate clock-k2hk.c file. Acked-by: NMurali Karicheri <m-karicheri2@ti.com> Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>
-
由 Hao Zhang 提交于
This patch moves K2HK board directory to a common Keystone II board directory. The Board related common functions are moved to a common keystone board file. Acked-by: NMurali Karicheri <m-karicheri2@ti.com> Signed-off-by: NHao Zhang <hzhang@ti.com> Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>
-
由 Murali Karicheri 提交于
With latest v3.13 kernel, unitrd dt fixup is not needed. However for older kernel versions such as v3.8/v3.10, it is needed. So to work with both, add a u-boot env variable that can be set to do dt fixup for older kernels. Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com> Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>
-
由 Khoronzhuk, Ivan 提交于
Use KS2_ prefix in all definitions, for that replace K2HK_ prefix and add KS2_ prefix where it's needed. It requires to change names also in places where they're used. Align lines and remove redundant definitions in kardware-k2hk.h at the same time. Using common KS2_ prefix helps resolve redundant redefinitions and adds opportunity to use KS2_ definition across a project not thinking about what SoC should be used. It's more convenient and we don't need to worry about the SoC type in common files, hardware.h will think about that. The hardware.h decides definitions of what SoC to use. Acked-by: NMurali Karicheri <m-karicheri2@ti.com> Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>
-
由 Hao Zhang 提交于
By default all DSPs are turned off, for another case option to turn off them is added in this commit. Also add command to turn off itself. Acked-by: NMurali Karicheri <m-maricheri2@ti.com> Signed-off-by: NHao Zhang <hzhang@ti.com> Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>
-
由 Hao Zhang 提交于
The SoC related common functions in board.c should be placed to a common keystone.c arch file. Acked-by: NMurali Karicheri <m-maricheri2@ti.com> Signed-off-by: NHao Zhang <hzhang@ti.com> Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>
-
由 Khoronzhuk, Ivan 提交于
This driver is needed in case if keystone driver is used. Currently only keystone_net driver uses it. So to avoid redundant code compilation make the keystone_nav dependent on keystone net driver. It also leads to compilation errors for boards that does't use it. Acked-by: NMurali Karicheri <m-karicheri2@ti.com> Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>
-
由 Hao Zhang 提交于
Add DDR3 PHY configs updated for PG 2.0 Also add DDR3A PHY reset before init for PG2.0 SoCs. Acked-by: NMurali Karicheri <m-maricheri2@ti.com> Signed-off-by: NHao Zhang <hzhang@ti.com> Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>
-
由 Khoronzhuk, Ivan 提交于
It's convinient to hold ddr3 function definitions in separate file such as ddr3.h. So move this from hardware.h to ddr3.h. Acked-by: NMurali Karicheri <m-karicheri2@ti.com> Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>
-
由 Khoronzhuk, Ivan 提交于
Use common keystone2 Power Sleep controller base address instead of directly deciding which keystone2 SoC is used in psc module. Acked-by: NMurali Karicheri <m-karicheri2@ti.com> Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>
-
由 Stefan Roese 提交于
Use generic board setup functions by defining CONFIG_SYS_GENERIC_BOARD. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Tom Rini <trini@ti.com>
-
由 Stefan Roese 提交于
These functions have been merged into the common GPMC init code with this commit a0a37183 (ARM: omap: merge GPMC initialization code for all platform). The file is not compiled any more. So remove it as well. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Pekon Gupta <pekon@ti.com> Cc: Tom Rini <trini@ti.com> Acked-by: NPekon Gupta <pekon@ti.com>
-
由 Stefan Roese 提交于
Commit a0a37183 (ARM: omap: merge GPMC initialization code for all platform) broke NAND on OMAP3 based platforms. I noticed this while testing the latest 2014.07-rc version on the TAO3530 board. NAND detection did not work with this error message: NAND: nand: error: Unable to find NAND settings in GPMC Configuration - quitting As OMAP3 configs don't set CONFIG_NAND but CONFIG_NAND_CMD. the GPMC was not initialized for NAND at all. This patch now fixes this issue. Tested on TAO3530 board. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Pekon Gupta <pekon@ti.com> Cc: Tom Rini <trini@ti.com> Acked-by: NPekon Gupta <pekon@ti.com>
-
由 Andreas Bießmann 提交于
Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com> Cc: Thomas Weber <thomas.weber@corscience.de>
-
由 Tom Rini 提交于
As noted by clang, we have been shifting certain values out of 32bit range when setting some DDR registers. Upon further inspection these had been touching reserved fields (and having no impact). These came in from historical bring-up code and can be discarded. Similarly, we had been declaring some fields as 0 when they will be initialized that way. Tested on Beaglebone White. Reported-by: NJeroen Hofstee <jeroen@myspectrum.nl> Cc: Ash Charles <ash@gumstix.com> Signed-off-by: NTom Rini <trini@ti.com> Tested-By: NAsh Charles <ashcharles@gmail.com>
-
由 Khoronzhuk, Ivan 提交于
Add script to automate NAND flash process. As for now the board has two burn scripts - burn to boot from SPI NOR flash and burn to boot from AEMIF NAND flash, rename burn_uboot script to burn_uboot_spi. Also update README to contain NAND burn U-boot process description. Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com> Acked-by: NMurali Karicheri <m-karicheri2@ti.com>
-
由 Khoronzhuk, Ivan 提交于
Add support for NAND gpheader image. TI Keystone2 ROM bootloader expects 8 bytes of trailing zeroes in the nand u-boot image. So add zeros at the end of the nand gph image. Acked-by: NMurali Karicheri <m-karicheri2@ti.com> Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>
-
由 Khoronzhuk, Ivan 提交于
The Keystone SoCs use the same NAND driver as Davinci. This patch adds opportunity to write Keystone U-boot image to NAND device using appropriate RBL ECC layout. This is needed only if RBL boots U-boot from NAND device and that's supposed that raw u-boot partition is used only for writing image. The main problem is that default Davinci ECC layout is different from Keystone RBL layout. To read U-boot image the RBL needs that image was written using RBL ECC layout. The BBT table is written using default Davinci layout and has to be updated using one. The BBT can be updated only while erasing chip or by forced bad block assigning, so erase function has to use native ecc layout in order to be able to write BBT correctly. So if we're writing to NAND U-boot address we use RBL layout for others we use default ECC layout. Also remove definition for CONFIG_CMD_NAND_ECCLAYOUT as there is no reasons to use ECC layout commands. It was added by mistake. Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>
-
由 Tom Rini 提交于
Add in an init function for the drivers/power framework so we can dump and read the registers via i2c. Cc: Łukasz Majewski <l.majewski@samsung.com> Signed-off-by: NTom Rini <trini@ti.com>
-
由 Tom Rini 提交于
As this is a weak function that we may override, provide a prototype for it. Cc: Łukasz Majewski <l.majewski@samsung.com> Signed-off-by: NTom Rini <trini@ti.com>
-
由 Mugunthan V N 提交于
Set the active_slave to 1 as slave 1 is pinned out in dra72x base board Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com>
-
由 Mugunthan V N 提交于
Add cpsw second slave port pinmux to use it as primary ethernet port Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com>
-
由 Mugunthan V N 提交于
Add support for using the second slave port of cpsw to be used as primary ethernet. Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com>
-
- 05 7月, 2014 8 次提交
-
-
由 Chin Liang See 提交于
To move the arch common function away from board folder to arch/arm/cpu/armv7/socfpga folder. Its to avoid code duplication for other non Altera dev kit which is using socfpga device. Signed-off-by: NChin Liang See <clsee@altera.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de> Cc: Pavel Machek <pavel@denx.de> Cc: Dinh Nguyen <dinguyen@altera.com> Acked-by: NDetlev Zundel <dzu@denx.de>
-
由 Linus Walleij 提交于
Turn on generic board for the integrators, as per the request in the startup message. Everything just works, tested on the Integrator/AP and Integrator/CP. Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Stephen Warren 提交于
Serial port, SD card, and LCD all work. Signed-off-by: NStephen Warren <swarren@wwwdotorg.org> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Christian Riesch 提交于
Signed-off-by: NChristian Riesch <christian.riesch@omicron.at>
-
由 Shaibal.Dutta 提交于
Fix following compilation error when CONFIG_ARM64 is defined Error: unknown or missing system register name at operand 2 -- `mrs x0,daifmsr daifset,#3' Signed-off-by: NShaibal.Dutta <shaibal.dutta@broadcom.com> Signed-off-by: NDarwin Rambo <drambo@broadcom.com> Reviewed-by: NDarwin Rambo <drambo@broadcom.com>
-
由 Łukasz Dałek 提交于
Enable 'generic board init' for H2200 palmtop. Signed-off-by: NLukasz Dalek <luk0104@gmail.com> Acked-by: NMarek Vasut <marex@denx.de>
-
由 Jeroen Hofstee 提交于
cc: Tom Rini <trini@ti.com> Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>
-
由 Albert ARIBAUD 提交于
Run tools/reformat.py -i -d '-' -s 8 to reorder boards as header comments suggest
-