- 09 7月, 2020 28 次提交
-
-
由 Simon Glass 提交于
At present these functions fail silently even when debugging, which is not very helpful. Add a way to print a message to the serial output when an error is detected. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NAnatolij Gustschin <agust@denx.de> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Simon Glass 提交于
In the video drivers it is useful to print errors while debugging but doing so risks an infinite loop as the debugging info itself may go through the video drivers. Add a new console function that prints information only to the serial device, thus making it safe for use in debugging. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Simon Glass 提交于
The APL FSP appears to leave the FPU in a bad state in that it has registers in use. This causes an error when the next FPU operation is performed. Work around this by re-resetting the FPU after calling FSP-M. This allows the freetype console to work correctly. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Tom Rini 提交于
- mem cmd improvements - TPM fixes - SPL/NAND/FIT fixes - RSA improvements
-
由 Heiko Stuebner 提交于
rsa_verify() expects a memory region and wants to do the hashing itself, but there may be cases where the hashing is done via other means, like hashing a squashfs rootfs. So add rsa_verify_hash() to allow verifiying a signature against an existing hash. As this entails the same verification routines we can just move the relevant code over from rsa_verify() and also call rsa_verify_hash() from there. Signed-off-by: NHeiko Stuebner <heiko.stuebner@theobroma-systems.com>
-
由 Simon Glass 提交于
It is useful to be able to find hex values and strings in a memory range. Add a command to support this. cmd: Fix 'md' and add a memory-search command At present 'md.q' is broken. This series provides a fix for this. It also implements a new memory-search command called 'ms'. It allows searching memory for hex and string data. END Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This is defined only when __lp64__ is defined. That means that ulong is 64 bits long. Therefore we don't need to use a separate u64 type on those architectures. Fix up the code to take advantage of that, removing the preprocessor conditions. Also include the header file that defines MEM_SUPPORT_64BIT_DATA. It is included by env.h in this file, but that might not last forever. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This is defined only when __lp64__ is defined. That means that ulong is 64 bits long. Therefore we don't need to use a separate u64 type on those architectures. Fix up the code to take advantage of that, removing the preprocessor conditions. Also include the missing header file that defines MEM_SUPPORT_64BIT_DATA Fixes: 09140113 ("command: Remove the cmd_tbl_t typedef") Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This is defined only when __lp64__ is defined. That means that ulong is 64 bits long. Therefore we don't need to use a separate u64 type on those architectures. Fix up the code to take advantage of that, removing the preprocessor conditions. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NStefan Roese <sr@denx.de>
-
由 Simon Glass 提交于
It is a bit painful to have #ifdefs in the middle of the help for each command. Add a macro to avoid this. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NStefan Roese <sr@denx.de>
-
由 Simon Glass 提交于
Define this macro always so we don't need the preprocessor to check it. Convert the users to #if instead of #ifdef. Note that '#if MEM_SUPPORT_64BIT_DATA' does not give an error if the macro is not define. It just assumes zero. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NStefan Roese <sr@denx.de>
-
由 Dario Binacchi 提交于
Replacing the ret variable with err and handling first the error condition about the value returned by the spl_nand_fit_read routine, improves the code readability. Furthermore, the 'else' int the 'else return ret' instruction was useless. cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: NDario Binacchi <dariobin@libero.it>
-
由 Dario Binacchi 提交于
The offset at which the image to be loaded from NAND is located is retrieved from the itb header. The presence of bad blocks in the area of the NAND where the itb image is located could invalidate the offset which must therefore be adjusted taking into account the state of the sectors concerned. cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: NDario Binacchi <dariobin@libero.it> Reviewed-by: NMichael Trimarchi <michael@amarulasolutions.com>
-
由 Dario Binacchi 提交于
If uboot does not embed its device tree and the FIT loading function returns error in case of failure in the FDT append, the redundant itb image could be loaded. cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: NDario Binacchi <dariobin@libero.it> Reviewed-by: NMichael Trimarchi <michael@amarulasolutions.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Dario Binacchi 提交于
U-Boot adopted the kernel-doc annotation style. cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: NDario Binacchi <dariobin@libero.it> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Heiko Stuebner 提交于
Verifying FIT images obviously needs the rsa parts of crypto support and while main uboot always compiles crypto support, it's optional for SPL and we should thus select the necessary option to not end up in compile errors like: u-boot/lib/rsa/rsa-verify.c:328: undefined reference to `rsa_mod_exp' So select SPL_CRYPTO_SUPPORT in SPL_FIT_SIGNATURE. Signed-off-by: NHeiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Heiko Stuebner 提交于
rsa-checsum needs support for hash functions or else will run into compile errors like: u-boot/lib/rsa/rsa-checksum.c:28: undefined reference to `hash_progressive_lookup_algo' So similar to the main FIT_SIGNATURE entry selects HASH, select SPL_HASH_SUPPORT for SPL_FIT_SIGNATURE. Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NHeiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Heiko Stuebner 提交于
padding_pss_verify only works with the default pss salt setting of -2 (length to be automatically determined based on the PSS block structure) not -1 (salt length set to the maximum permissible value), which makes verifications of signatures with that saltlen fail. Until this gets implemented at least document this behaviour. Signed-off-by: NHeiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Heiko Stuebner 提交于
n, rr and rrtmp are used for internal calculations, but in the end the results are copied into separately allocated elements of the actual key_prop, so the n, rr and rrtmp elements are not used anymore when returning from the function and should of course be freed. Signed-off-by: NHeiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Heiko Stuebner 提交于
When calculating rrtmp/rr rsa_gen_key_prop() tries to make (((rlen + 31) >> 5) + 1) steps in the rr uint32_t array and (((rlen + 7) >> 3) + 1) / 4 steps in uint32_t rrtmp[] with rlen being num_bits * 2 On a 4096bit key this comes down to to 257 uint32_t elements in rr and 256 elements in rrtmp but with the current allocation rr and rrtmp only have 129 uint32_t elements. On 2048bit keys this works by chance as the defined max_rsa_size=4096 allocates a suitable number of elements, but with an actual 4096bit key this results in other memory parts getting overwritten. So as suggested by Heinrich Schuchardt just use the actual bit-size of the key as base for the size calculation, in turn making the code compatible to any future keysizes. Suggested-by: NHeinrich Schuchardt <xypron.debian@gmx.de> Signed-off-by: NHeiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: NSimon Glass <sjg@chromium.org> rrtmp needs 2 + (((*prop)->num_bits * 2) >> 5) array elements. Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heiko Stuebner 提交于
The exponent field of struct key_prop gets allocated an uint64_t, and the contents are positioned from the back, so an exponent of "0x01 0x00 0x01" becomes 0x0 0x0 0x0 0x0 0x0 0x1 0x0 0x1" Right now rsa_gen_key_prop() allocates a uint64_t but sets exp_len to the size returned from the parser, while on the other hand the when getting the key from the devicetree exp_len always gets set to sizeof(uint64_t). So bring that in line with the established code. Signed-off-by: NHeiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Heiko Stuebner 提交于
Right now in multiple places there are only checks for the full CONFIG_RSA_VERIFY_WITH_PKEY option, not split into main,spl,tpl variants. This breaks when the rsa functions get enabled for SPL, for example to verify u-boot proper from spl. So fix this by using the existing helpers to distinguis between build-steps. Signed-off-by: NHeiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Heiko Stuebner 提交于
While the SPL may want to do signature checking this won't be the case for TPL in all cases, as TPL is mostly used when the amount of initial memory is not enough for a full SPL. So on a system where SPL uses DM but TPL does not we currently end up with a TPL compile error of: lib/rsa/rsa-verify.c:48:25: error: dereferencing pointer to incomplete type ‘struct checksum_algo’ To prevent that change the $(SPL_) to $(SPL_TPL_) to distinguish between both. If someone really needs FIT signature checking in TPL as well, a new TPL_RSA_VERIFY config symbol needs to be added. Signed-off-by: NHeiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Heiko Stuebner 提交于
Even in boot scripts it may be needed to "panic" when all options are exhausted and the device specification specifies hanging instead of resetting the board. So add a new panic command that just wraps around the core panic call in U-Boot and can take an optional message. Signed-off-by: NHeiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Stefan Roese 提交于
Add linefeeds before and after the announce string. This makes the output easier to read, especially if some text follows the announce message without a specific additional CR. Signed-off-by: NStefan Roese <sr@denx.de> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Johannes Holland 提交于
tpm_tis_spi.c directly includes tpm_tis.h and tpm-v2.h which both define the same enums (see e.g. TPM_ACCESS_VALID). Add an #ifndef to prevent redeclaration errors. Signed-off-by: NJohannes Holland <johannes.holland@infineon.com>
-
由 Dhananjay Phadke 提交于
Add support for TPM2 GetRandom command Signed-off-by: NDhananjay Phadke <dphadke@linux.microsoft.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Bruno Thomsen 提交于
This solves a compatibility issue with Linux device trees that contain TPMv2.x hardware. So it's easier to import DTS from upstream kernel when migrating board init from C code to DTS. The issue is that fallback binding is different between Linux and u-Boot. Linux: "tcg,tpm_tis-spi" U-Boot: "tis,tpm2-spi" As there are currently no in-tree users of the U-Boot binding, it makes sense to use Linux fallback binding. Signed-off-by: NBruno Thomsen <bruno.thomsen@gmail.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
- 08 7月, 2020 12 次提交
-
-
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic由 Tom Rini 提交于
- Add proper Odroid-N2 board support code - Add support for Odroid-C4 single board computer
-
由 Heiko Schocher 提交于
commit 2bd261dd ("gpio: search for gpio label if gpio is not found through bank name") disabled DM_GPIO_LOOKUP_LABEL which is needed in sandbox defconfigs, as we have tests for this functionality. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Neil Armstrong 提交于
The PHY needs a reset in order to be functionnal for U-Boot, add the old PHY reset bindings for dwmac until we support the new bindings in the PHY node. Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com> Tested-by: NAnand Moon <linux.amoon@gmail.com>
-
由 Christian Hewitt 提交于
Odroid C4 is an Amlogic SM1 device, the board config and board documentation are adapted from the Odroid-N2 support from the same vendor. Signed-off-by: NChristian Hewitt <christianshewitt@gmail.com> [narmstrong: fix odroid-c4.rst typos and structure] Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com> Tested-by: NAnand Moon <linux.amoon@gmail.com>
-
由 Christian Hewitt 提交于
This imports the changes and the new Odroid-C4 board from the Linux commit b3a9e3b9622a ("Linux 5.8-rc1"). Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com> Tested-by: NAnand Moon <linux.amoon@gmail.com>
-
由 Pascal Vizeli 提交于
Add a proper Odroid-N2 board support to handle the Ethernet MAC address stored in the in-SoC eFuses. Signed-off-by: NPascal Vizeli <pvizeli@syshack.ch> Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com> Tested-by: NAnand Moon <linux.amoon@gmail.com>
-
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip由 Tom Rini 提交于
- dts sync from kernel for rk3399 boards; - Add Radxa Rock Pi N8, N10; - Some feature update for Pinebook Pro;
-
由 Tom Rini 提交于
- Improve s700 SoC support - Fix building with clang on ARM. - Juno platform updates - fs/dm cmd improvements - Other assorted improvements / fixes
-
由 Andre Przywara 提交于
The ARM Juno boards (-r1 and -r2) feature a Silicon Image 3132 PCIe SATA controller soldered on the board, providing two SATA ports. Enable the driver and the sata command in the defconfig, to be able to load images from SATA disks. Tested by loading kernels and Grub/EFI from an SSD and successfully booting a Linux system (with and without using UEFI). Signed-off-by: NAndre Przywara <andre.przywara@arm.com> Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Andre Przywara 提交于
The ARM Juno boards in their -r1 and -r2 variants sport a PCIe controller, which we configure already in board specific code to be ECAM compliant. Hence we can just enable the generic ECAM driver to let U-Boot use PCIe devices. Add the respective options to the Juno defconfig to enable the PCI framework and the generic ECAM driver, and initialise the driver upon loading U-Boot. Make some functions in the Juno PCIe init code static on the way. Signed-off-by: NAndre Przywara <andre.przywara@arm.com> Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Andre Przywara 提交于
Even though the sata_sil driver was converted over to the driver model, it still assumed that the PCI controller is using the legacy interface. Allow the "devno" member to be a struct udevice pointer and use DM_PCI_COMPAT to covert the rest of the interface. Signed-off-by: NAndre Przywara <andre.przywara@arm.com> Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Andre Przywara 提交于
The smc911X driver is now DM enabled, so we can switch the Juno board over to use DM_ETH for the on-board Fast Ethernet device. Works out of the box by using the DT. Signed-off-by: NAndre Przywara <andre.przywara@arm.com> Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
-