- 22 5月, 2017 2 次提交
-
-
由 Marek Vasut 提交于
Add driver for the Renesas Ethernet AVB block found in RCar H3/M3. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Tom Rini <trini@konsulko.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Based on work of: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Takeshi Kihara <takeshi.kihara.df@renesas.com> Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
-
由 Kouei Abe 提交于
This patch fixes to read the GPIO status after confirming the INOUT setting. Signed-off-by: NKouei Abe <kouei.abe.cp@renesas.com> Signed-off-by: NHiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Tom Rini <trini@konsulko.com>
-
- 19 5月, 2017 5 次提交
-
-
-
-
-
由 Jean-Jacques Hiblot 提交于
SDIO is not supported in u-boot, there is no point in enabling mmc3. For this purpose, add u-boot specific dtsi that this will be included automatically while building the dtb. Signed-off-by: NJean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
The intention of having a -u-boot.dtsi file is to be able to make changes to the provided upstream dts files as well as to be able to add nodes. Change the logic for adding the file from making it the last included file at the top of the dts to being included at the end of the file. Cc: Jean-Jacques Hiblot <jjhiblot@ti.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: NTom Rini <trini@konsulko.com> Tested-by: NJean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 18 5月, 2017 33 次提交
-
-
-
由 Ley Foon Tan 提交于
Update Kconfig and Makefile to enable Arria 10. Clean up Makefile and sorting *.o alphanumerically. Signed-off-by: NTien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: NLey Foon Tan <ley.foon.tan@intel.com>
-
由 Ley Foon Tan 提交于
Add support for the Arria10 SoCDK. Signed-off-by: NTien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: NLey Foon Tan <ley.foon.tan@intel.com>
-
由 Ley Foon Tan 提交于
Add config and defconfig for the Arria10 and update socfpga_common.h. Signed-off-by: NTien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: NLey Foon Tan <ley.foon.tan@intel.com>
-
由 Ley Foon Tan 提交于
Add SPL support for Arria 10. Signed-off-by: NTien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: NLey Foon Tan <ley.foon.tan@intel.com>
-
由 Ley Foon Tan 提交于
Device tree files for Arria 10 Signed-off-by: NTien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: NLey Foon Tan <ley.foon.tan@intel.com>
-
由 Ley Foon Tan 提交于
Add misc support for Arria 10. Signed-off-by: NTien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: NLey Foon Tan <ley.foon.tan@intel.com>
-
由 Ley Foon Tan 提交于
Add pinmux support for Arria 10. Signed-off-by: NTien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: NLey Foon Tan <ley.foon.tan@intel.com>
-
由 Ley Foon Tan 提交于
Add sdram header file for Arria 10. Signed-off-by: NTien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: NLey Foon Tan <ley.foon.tan@intel.com>
-
由 Ley Foon Tan 提交于
Add system manager register struct and macros for Arria 10. Signed-off-by: NTien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: NLey Foon Tan <ley.foon.tan@intel.com>
-
由 Ley Foon Tan 提交于
Add clock driver support for Arria 10. Signed-off-by: NTien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: NLey Foon Tan <ley.foon.tan@intel.com>
-
由 Ley Foon Tan 提交于
Add reset driver support for Arria 10. Signed-off-by: NTien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: NLey Foon Tan <ley.foon.tan@intel.com>
-
由 Ley Foon Tan 提交于
Add i2c, timer and other A10 macros. Signed-off-by: NLey Foon Tan <ley.foon.tan@intel.com>
-
由 Ley Foon Tan 提交于
Restructure misc driver in the preparation to support A10. Move the Gen5 specific code to gen5 file. Change all uint32_t_to u32. Signed-off-by: NLey Foon Tan <ley.foon.tan@intel.com>
-
由 Ley Foon Tan 提交于
Restructure system manager in the preparation to support A10. No functional change. Change uint32_t to u32. Signed-off-by: NLey Foon Tan <ley.foon.tan@intel.com>
-
由 Ley Foon Tan 提交于
Restructure reset manager driver in the preparation to support A10. Move the Gen5 specific code to gen5 files. Signed-off-by: NLey Foon Tan <ley.foon.tan@intel.com>
-
由 Ley Foon Tan 提交于
Restructure clock manager driver in the preparation to support A10. Move the Gen5 specific code to _gen5 files. - Change all uint32_t to u32 and change to use macro BIT(n) for bit shift. - Check return value from wait_for_bit(). So change return type to int for cm_write_with_phase() and cm_basic_init(). Signed-off-by: NLey Foon Tan <ley.foon.tan@intel.com>
-
由 Liam Beguin 提交于
Add DM support for i2c functions. Signed-off-by: NLiam Beguin <lbeguin@tycoint.com> Signed-off-by: NSylvain Lemieux <slemieux@tycoint.com> Reviewed-by: NMarek Vasut <marex@denx.de>
-
由 Peng Fan 提交于
Each time set_state is called, a new piece memory will be allocated for pin_data, but not freed, this will incur memory leak. When error, the devm API could not free memory automatically. So need call devm_kfree when error. Issue reported by Coverity Signed-off-by: NPeng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stefan Agner <stefan.agner@toradex.com> Cc: Stefano Babic <sbabic@denx.de>
-
由 Stefano Babic 提交于
mx7dsabresd_secure_defconfig was not updated after moving to DM. Signed-off-by: NStefano Babic <sbabic@denx.de>
-
由 Peng Fan 提交于
Switch to use DM USB. Signed-off-by: NPeng Fan <peng.fan@nxp.com>
-
由 Peng Fan 提交于
Reset ENET_RST_B to make ENET function stable. Since DM_GPIO enabled, we use "gpio_spi@0_5" which corresponds to ENET_RST_B. Signed-off-by: NPeng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
-
由 Peng Fan 提交于
Enable more DM drivers. The imx I2C/MMC DM drivers needs DM_GPIO enabled. The 74x164 drivers needs SOFT_SPI and DM_GPIO enabled. So needs to enable them together. Signed-off-by: NPeng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
-
由 Peng Fan 提交于
Make oe-pins optional because some boards have fixed it to enable. Signed-off-by: NPeng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Peng Fan 提交于
Add the Kconfig entry for SOFT_SPI which uses gpio to simulate the SPI signals. We use it for accessing 74x164 on some i.MX boards. Signed-off-by: NPeng Fan <peng.fan@nxp.com> Cc: Jagan Teki <jagan@openedev.com> Cc: Stefano Babic <sbabic@denx.de>
-
由 Peng Fan 提交于
Add usdhc support Signed-off-by: NPeng Fan <peng.fan@nxp.com>
-
由 Peng Fan 提交于
Add i2c support. Signed-off-by: NPeng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
-
由 Peng Fan 提交于
Add regulator node for usb and mmc. Signed-off-by: NPeng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
-
由 Peng Fan 提交于
Add spi gpio node for 74LV595. Signed-off-by: NPeng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
-
由 Peng Fan 提交于
Add basic dts for i.MX7D-SDB board. Signed-off-by: NPeng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
-
由 Peng Fan 提交于
Sync with Linux commit 308ac756("Merge tag 'gpio-v4.11-3'"). Signed-off-by: NPeng Fan <peng.fan@nxp.com> Cc: Stefan Agner <stefan.agner@toradex.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: NStefano Babic <sbabic@denx.de>
-
由 Tim Harvey 提交于
Early backports of the imx wdog external reset feature occured before the property was accepted upstream and used 'ext-reset-output' instead of 'fsl,ext-reset-output'. In order to support older kernels remove both properties. Signed-off-by: NTim Harvey <tharvey@gateworks.com>
-
由 Tim Harvey 提交于
Signed-off-by: NTim Harvey <tharvey@gateworks.com>
-