- 13 6月, 2020 1 次提交
-
-
由 Dan Murphy 提交于
ti_phy_init function was allocated to the DP83867 PHY. This function name is to generic for a specific PHY. The function can be moved to a TI specific file that can register all TI PHYs that are defined in the defconfig. The ti_phy_init file will contain all TI PHYs initialization so that only phy_ti_init can be called from the framework. In addition to the above the config flag for the DP83867 needs to be changed in the Kconfig and dependent defconfig files. The config flag that was used for the DP83867 was also generic in nature so a more specific config flag for the DP83867 was created. Acked-by: NMichal Simek <michal.simek@xilinx.com> Signed-off-by: NDan Murphy <dmurphy@ti.com>
-
- 29 4月, 2020 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 09 3月, 2020 1 次提交
-
-
由 Faiz Abbas 提交于
With CONFIG_SUPPORT_EMMC_BOOT moved to Kconfig, move it to defconfig files. Signed-off-by: NFaiz Abbas <faiz_abbas@ti.com> Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
-
- 03 3月, 2020 1 次提交
-
-
由 Vignesh Raghavendra 提交于
Enable OSPI related defconfigs. Also enable SPL_DMA so that DMA is used during OSPI boot Signed-off-by: NVignesh Raghavendra <vigneshr@ti.com>
-
- 29 2月, 2020 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 23 1月, 2020 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 20 1月, 2020 3 次提交
-
-
由 Vignesh Raghavendra 提交于
Enable USB keyboard to be used as input device at U-Boot prompt. Both serial and USB keyboard will be active inputs simultaneously. Signed-off-by: NVignesh Raghavendra <vigneshr@ti.com> Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 Vignesh Raghavendra 提交于
Enable configs related to USB Host mode, Peripheral mode and DFU. Signed-off-by: NVignesh Raghavendra <vigneshr@ti.com> Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 Faiz Abbas 提交于
Add Support for ADMA in a53 and r5 defconfigs. Signed-off-by: NFaiz Abbas <faiz_abbas@ti.com> Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
-
- 05 12月, 2019 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 21 11月, 2019 2 次提交
-
-
由 Tom Rini 提交于
- In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: NTom Rini <trini@konsulko.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com> Reviewed-by: NSimon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
-
由 Tom Rini 提交于
Today in initr_reloc_global_data() we use some non-obvious tests to determine if we need to relocate the env_addr within gd or not. In order to facilitate migration of other symbols to Kconfig we need to introduce a new symbol for this particular use case. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 13 11月, 2019 1 次提交
-
-
由 Tom Rini 提交于
Move this symbol to Kconfig. As part of this we can drop a UBI-specific symbol that was a stop-gap for not having this particular symbol in Kconfig. Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 12 11月, 2019 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 12 10月, 2019 2 次提交
-
-
由 Lokesh Vutla 提交于
Enable CONFIG_DISPLAY_CPUINFO so that cpuinfo is printed during boot. Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 Lokesh Vutla 提交于
AM65x uses TISCI protocol to reset the device and does not support PSCI reset. So disable PSCI reset. Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
-
- 11 10月, 2019 2 次提交
-
-
由 Suman Anna 提交于
The A53 U-boot can support early booting of the MCU R5F remote processor(s) from U-boot prompt to achieve various system usecases before booting the Linux kernel. Update the default BOOTCOMMAND to provide an automatic and easier way to start the MCU R5F cores through added environment variables. Signed-off-by: NSuman Anna <s-anna@ti.com> Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 Suman Anna 提交于
Enable the R5F remoteproc driver for the AM65x GP EVM so that the MCU domain R5F cores can be booted from A53 U-boot. Signed-off-by: NSuman Anna <s-anna@ti.com> Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
-
- 23 9月, 2019 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 14 8月, 2019 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 13 8月, 2019 2 次提交
-
-
由 Sekhar Nori 提交于
Enable support for Intel E1000 based PCIe ethernet cards that can be used to test PCIe RC functionality on AM65x EVM. Signed-off-by: NSekhar Nori <nsekhar@ti.com>
-
由 Sekhar Nori 提交于
Enable support for PCIe and related configurations on AM654 EVM platform. Signed-off-by: NSekhar Nori <nsekhar@ti.com>
-
- 01 8月, 2019 1 次提交
-
-
由 Suman Anna 提交于
The K3 System Controller driver is used for loading and starting the System Firmware, and is used only on R5 SPL. It need not be enabled and built for the A53 U-Boot and SPL, so disable it from both the GP and HS AM65x A53 defconfigs. While at this, also remove the unneeded CONFIG_SPL_REMOTEPROC and CONFIG_CMD_REMOTEPROC as no remoteprocs are now loaded from A53 SPL. Signed-off-by: NSuman Anna <s-anna@ti.com> Reviewed-by: NLokesh Vutla <lokeshvutla@ti.com>
-
- 27 7月, 2019 1 次提交
-
-
由 Lokesh Vutla 提交于
k3_rproc driver is specifically meant for controlling an arm64 core using TISCI protocol. So rename the driver, Kconfig symbol, compatible and functions accordingly. While at it drop this remoteproc selection for a53 defconfig. Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
-
- 17 7月, 2019 9 次提交
-
-
由 Andreas Dannenberg 提交于
This will allow for downloading and applying overlays from an MMC/SD boot media based on the overlay_files ENV variable containing a list of overlay files. Signed-off-by: NAndreas Dannenberg <dannenberg@ti.com> Reviewed-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 Andreas Dannenberg 提交于
The malloc pool used before relocation is getting tight leading to out of memory errors doing certain DM-related calls. Since we are running the A53 SPL out of DDR let's just go ahead and bump its size as used in U-Boot proper as well as SPL (via Kconfig default value) from 8KB to 32KB. Signed-off-by: NAndreas Dannenberg <dannenberg@ti.com> Reviewed-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 Andreas Dannenberg 提交于
Enable GPIO driver for PCA953X-compatible I2C-based I/O expander which includes support for the TCA9554/PCA9554-type expander found on the AM654 EVM base board. Signed-off-by: NAndreas Dannenberg <dannenberg@ti.com> Reviewed-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 Andreas Dannenberg 提交于
Enable I2C via driver model as well as the associated set of U-Boot commands to allow us interacting with various I2C slave devices. Signed-off-by: NAndreas Dannenberg <dannenberg@ti.com> Signed-off-by: NVignesh R <vigneshr@ti.com> Reviewed-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 Faiz Abbas 提交于
Add configs to support RAW boot mode in eMMC. Signed-off-by: NFaiz Abbas <faiz_abbas@ti.com> Signed-off-by: NAndreas Dannenberg <dannenberg@ti.com>
-
由 Faiz Abbas 提交于
Add Support for creating GPT partitions in U-boot. Signed-off-by: NFaiz Abbas <faiz_abbas@ti.com>
-
由 Faiz Abbas 提交于
Add configs such that U-boot environment is in eMMC by default. Signed-off-by: NFaiz Abbas <faiz_abbas@ti.com>
-
由 Faiz Abbas 提交于
Add Support for CONFIG_REGMAP. Signed-off-by: NFaiz Abbas <faiz_abbas@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Faiz Abbas 提交于
Sync the sdhci0 node from kernel. This changes the compatible that is required to be there in the driver. Change the same for the SD card node which is not yet supported in kernel. This also syncs the main_pmx0 node as a side effect. Also change the name of the driver to match the compatible in kernel. Signed-off-by: NFaiz Abbas <faiz_abbas@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
- 16 7月, 2019 1 次提交
-
-
由 Grygorii Strashko 提交于
Enable TI K3 AM65x CPSW NUSS driver. Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: NKeerthy <j-keerthy@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com> Reviewed-by: NLokesh Vutla <lokeshvutla@ti.com>
-
- 08 5月, 2019 1 次提交
-
-
由 Kever Yang 提交于
SPL/TPL also need use sysreset for some feature like panic callback. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
- 30 4月, 2019 2 次提交
-
-
由 Simon Goldschmidt 提交于
Moved CONFIG_SPL_TEXT_BASE to common/spl/Kconfig and migrate existing values. Signed-off-by: NSimon Goldschmidt <simon.k.r.goldschmidt@gmail.com> [trini: Re-run migration] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 12 4月, 2019 2 次提交
-
-
由 Lokesh Vutla 提交于
Enable CONFIG_OF_BOARD_SETUP so that msmc sram dt nodes are updated correctly. Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 Grygorii Strashko 提交于
Enable TI K3 AM65x PSI-L, Ring Accelerator and UDMA drivers Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: NVignesh R <vigneshr@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
- 01 2月, 2019 1 次提交
-
-
由 Tien Fong Chee 提交于
Replace CONFIG_SPL_FAT_SUPPORT with CONFIG_SPL_FS_FAT so obj-$(CONFIG_$(SPL_)FS_FAT) can be used to control the build in both SPL and U-Boot. Signed-off-by: NTien Fong Chee <tien.fong.chee@intel.com> Reviewed-by: NSimon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-