- 23 3月, 2015 1 次提交
-
-
由 Boris BREZILLON 提交于
Freescale boards are currently all defined in arch/arm/Kconfig, which makes them hard to detect. Moreover the MX6 SoC variant (Q, D, DL, S, SL) selection is currently done via the SYS_EXTRA_OPTIONS option which marked as deprecated. Move to a more standard way to select sub-architecture and board by creating a Kconfig under arch/arm/cpu/armv7/mx6 and a new ARCH_MX6 option. Existing MX6 board definitions should be moved in this new Kconfig in choice menu, and new boards should be directly declared in this menu. Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
-
- 09 3月, 2015 1 次提交
-
-
由 Linus Walleij 提交于
While the Freescale ARMv8 board LS2085A will enter U-Boot both on a master and a secondary (slave) CPU, this is not the common behaviour on ARMv8 platforms. The norm is that U-Boot is entered from the master CPU only, while the other CPUs are kept in WFI (wait for interrupt) state. The code determining which CPU we are running on is using the MPIDR register, but the definition of that register varies with platform to some extent, and handling multi-cluster platforms (such as the Juno) will become cumbersome. It is better to only enable the multiple entry code on machines that actually need it and disable it by default. Make the single entry default and add a special ARMV8_MULTIENTRY KConfig option to be used by the platforms that need multientry and set it for the LS2085A. Delete all use of the CPU_RELEASE_ADDR from the Vexpress64 boards as it is just totally unused and misleading, and make it conditional in the generic start.S code. This makes the Juno platform start U-Boot properly. Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
- 06 3月, 2015 1 次提交
-
-
由 Gilles Gameiro 提交于
-
- 05 3月, 2015 1 次提交
-
-
由 Marek Vasut 提交于
Add support for the Altera Arria V development kit. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@opensource.altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Pavel Machek <pavel@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Vince Bridgers <vbridger@opensource.altera.com>
-
- 03 3月, 2015 1 次提交
-
-
由 Michal Simek 提交于
Add basic Xilinx ZynqMP arm64 support. Serial and SD is supported. It supports emulation platfrom ep108 and QEMU. Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
- 28 2月, 2015 1 次提交
-
-
由 Masahiro Yamada 提交于
Move arch/arm/cpu/armv7/uniphier/* -> arch/arm/mach-uniphier/* Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
- 25 2月, 2015 6 次提交
-
-
由 Masahiro Yamada 提交于
This is still a non-generic board. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Chan-Taek Park <c-park@ti.com> Acked-by: NMarek Vasut <marex@denx.de>
-
由 Masahiro Yamada 提交于
This is still a non-generic board. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Po-Yu Chuang <ratbert@faraday-tech.com> Acked-by: NMarek Vasut <marex@denx.de>
-
由 Masahiro Yamada 提交于
These are still non-generic boards. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Greg Ungerer <greg.ungerer@opengear.com> Acked-by: NMarek Vasut <marex@denx.de>
-
由 Masahiro Yamada 提交于
This is still a non-generic board. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Lei Wen <leiwen@marvell.com> Acked-by: NMarek Vasut <marex@denx.de>
-
由 Masahiro Yamada 提交于
This is still a non-generic board. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Matthias Weisser <weisserm@arcor.de> Acked-by: NMarek Vasut <marex@denx.de>
-
由 Masahiro Yamada 提交于
Now CONFIG_SPL_BUILD is not defined in Kconfig, so "!depends on SPL_BUILD" and "if !SPL_BUILD" are redundant. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
- 23 2月, 2015 1 次提交
-
-
由 Otavio Salvador 提交于
The WaRP Board is a Wearable Reference Plaform. The board features: - Freescale i.MX6 SoloLite processor with 512MB of RAM - Freescale FXOS8700CQ 6-axis Xtrinsic sensor - Freescale Kinetis KL16 MCU - Freescale Xtrinsic MMA955xL intelligent motion sensing platform The board implements a hybrid architecture to address the evolving needs of the wearables market. The platform consists of a main board and an example daughtercard with the ability to add additional daughtercards for different usage models. For more information about the project, visit: http://www.warpboard.org/Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br> Reviewed-by: NMarek Vasut <marex@denx.de> Acked-by: NStefano Babic <sbabic@denx.de>
-
- 21 2月, 2015 10 次提交
-
-
由 Stephen Warren 提交于
USB doesn't seem to work yet; the controller detects the on-board Hub/ Ethernet device but can't read the descriptors from it. I haven't investigated yet. Signed-off-by: NStephen Warren <swarren@wwwdotorg.org>
-
由 Masahiro Yamada 提交于
Move arch/arm/cpu/armv7/keystone/* -> arch/arm/mach-keystone/* Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Tom Rini <trini@ti.com>
-
由 Masahiro Yamada 提交于
Move arch/arm/cpu/arm926ejs/versatile/* -> arch/arm/mach-versatile/* Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
Move arch/arm/cpu/arm926ejs/orion5x/* -> arch/arm/mach-orion5x/* Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
-
由 Masahiro Yamada 提交于
Move arch/arm/cpu/armv7/highbank/* -> arch/arm/mach-highbank/* Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Rob Herring <robh@kernel.org>
-
由 Masahiro Yamada 提交于
Move arch/arm/cpu/arm926ejs/nomadik/* -> arch/arm/mach-nomadik/* Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Nomadik Linux Team <STN_WMM_nomadik_linux@list.st.com> Cc: Alessandro Rubini <rubini@unipv.it>
-
由 Masahiro Yamada 提交于
Move arch/arm/cpu/arm926ejs/kirkwood/* -> arch/arm/mach-kirkwood/* Note: Perhaps, can we merge arch/arm/mach-kirkwood and arch/arm/mvebu-common into arch/arm/mach-mvebu, like Linux? Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: NStefan Roese <sr@denx.de> Cc: Prafulla Wadaskar <prafulla@marvell.com> Cc: Luka Perkov <luka.perkov@sartura.hr>
-
由 Masahiro Yamada 提交于
Move arch/arm/cpu/arm926ejs/davinci/* -> arch/arm/mach-davinci/* Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Tom Rini <trini@ti.com>
-
由 Masahiro Yamada 提交于
This commit moves files as follows: arch/arm/cpu/arm720t/tegra20/* -> arch/arm/mach-tegra/tegra20/* arch/arm/cpu/arm720t/tegra30/* -> arch/arm/mach-tegra/tegra30/* arch/arm/cpu/arm720t/tegra114/* -> arch/arm/mach-tegra/tegra114/* arch/arm/cpu/arm720t/tegra124* -> arch/arm/mach-tegra/tegra124/* arch/arm/cpu/arm720t/tegra-common/* -> arch/arm/mach-tegra/* arch/arm/cpu/armv7/tegra20/* -> arch/arm/mach-tegra/tegra20/* arch/arm/cpu/armv7/tegra30/* -> arch/arm/mach-tegra/tegra30/* arch/arm/cpu/armv7/tegra114/* -> arch/arm/mach-tegra/tegra114/* arch/arm/cpu/armv7/tegra124/* -> arch/arm/mach-tegra/tegra124/* arch/arm/cpu/armv7/tegra-common/* -> arch/arm/mach-tegra/* arch/arm/cpu/tegra20-common/* -> arch/arm/mach-tegra/tegra20/* arch/arm/cpu/tegra30-common/* -> arch/arm/mach-tegra/tegra30/* arch/arm/cpu/tegra114-common/* -> arch/arm/mach-tegra/tegra114/* arch/arm/cpu/tegra124-common/* -> arch/arm/mach-tegra/tegra124/* arch/arm/cpu/tegra-common/* -> arch/arm/mach-tegra/* Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Tested-by: Simon Glass <sjg@chromium.org> [ on nyan-big ] Cc: Stephen Warren <swarren@nvidia.com> Cc: Tom Warren <twarren@nvidia.com>
-
由 Masahiro Yamada 提交于
The board select menu in arch/arm/Kconfig is still big. To slim down it, this commit moves AT91 boards to arch/arm/mach-at91/Kconfig. Also, consolidate "config SYS_SOC" in each board Kconfig. The Kconfig files under board/ directory were modified with the following command: find board -name Kconfig | xargs sed -i -e ' /config SYS_SOC/ { N /default "at91"/ { N d } } ' Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: NAndreas Bießmann <andreas.devel@googlemail.co>
-
- 13 2月, 2015 1 次提交
-
-
由 Simon Glass 提交于
Remove driver model CONFIGs from the board config header and use Kconfig instead. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 08 2月, 2015 2 次提交
-
-
由 Bo Shen 提交于
Signed-off-by: NBo Shen <voice.shen@atmel.com>
-
由 Bo Shen 提交于
The sama5d4ek support boot up from NAND flash, SD/MMC card and also the SPI flash. Signed-off-by: NBo Shen <voice.shen@atmel.com>
-
- 07 2月, 2015 2 次提交
-
-
由 Stefan Roese 提交于
This patch adds SPL support to the db-mv784mp-gp eval board. Signed-off-by: NStefan Roese <sr@denx.de> Reviewed-by: NLuka Perkov <luka.perkov@sartura.hr>
-
由 Stefan Roese 提交于
This patch adds SPL support to the maxbcm MV78460 based board. Including the fixed DDR configuratrion needed for the DDR training code. And the the serdes PHY init code. Signed-off-by: NStefan Roese <sr@denx.de> Reviewed-by: NLuka Perkov <luka.perkov@sartura.hr>
-
- 30 1月, 2015 2 次提交
-
-
由 Linus Walleij 提交于
The Juno Development Platform is a physical Versatile Express device with some differences from the emulated semihosting models. The main difference is that the system is split in a SoC and an FPGA where the SoC hosts the serial ports at totally different adresses. Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Linus Walleij 提交于
The Versatile Express ARMv8 semihosted FVP platform is still using the legacy CONFIG_SYS_EXTRA_OPTIONS method to configure some compile-time flags. Get rid of this and create a Kconfig entry for the FVP model, and a selectable bool for the semihosting library. The FVP subboard is now modeled as a target choice so we can eventually choose between different ARMv8 versatile express boards (FVP, base model, Juno...) this way. All dependent symbols are updated to reflect this. The 64bit Versatile Express board symbols are renamed VEXPRESS64 so we have some chance to see what is actually going on. Tested on the FVP fast model. Acked-by: NSteve Rae <srae@broadcom.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
- 22 1月, 2015 2 次提交
-
-
由 Christian Gmeiner 提交于
Signed-off-by: NChristian Gmeiner <christian.gmeiner@gmail.com>
-
由 Peng Fan 提交于
select SUPPORT_SPL for mx6sxsabresd. Signed-off-by: NPeng Fan <Peng.Fan@freescale.com>
-
- 19 1月, 2015 1 次提交
-
-
由 Stefan Roese 提交于
This patch adds the new Barco platinum platform. It currently includes those two boards: platinum-titanium ----------------- This is the same board as the titanium that is already supported in mainline U-Boot. But its now moved to this new platform to support multiple "flavors" of imx6 boards in one directory. Its also moved to support SPL booting. And with this we use the run-time DDR configuration of this SPL support. The board is equipped with the Micron MT41J128M16JT-125 DDR chips. We now can remove the DDR related registers tuples from the imximage.cfg file. As all this is done in the SPL at run-time. platinum-picon -------------- This board is new and based on the MX6DL with 1GiB DDR using the Micron MT41K256M16HA DDR3 chips. Its also equipped with 2 NAND chips (each 512MiB). Signed-off-by: NStefan Roese <sr@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Pieter Ronsijn <pieter.ronsijn@barco.com>
-
- 18 12月, 2014 1 次提交
-
-
由 Masahiro Yamada 提交于
Now UniPhier platform is only supported with SPL. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
- 12 12月, 2014 2 次提交
-
-
由 Alison Wang 提交于
As NOR/NAND/SD boot are all supported on LS1021AQDS/TWR boards, the prompt message "Support ls1021aqds_nor" in Kconfig is not clear. This patch changes it to "Support ls1021aqds". Signed-off-by: NAlison Wang <alison.wang@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
由 Alison Wang 提交于
Add SUPPORT_SPL feature for SD and NAND boot on LS1021AQDS and LS1021ATWR. Signed-off-by: NAlison Wang <alison.wang@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
- 10 12月, 2014 1 次提交
-
-
由 Vikas Manocha 提交于
stv0991 architecture support added. It contains the support for following blocks - Timer - uart Signed-off-by: NVikas Manocha <vikas.manocha@st.com> [trini: Add arch/arm/cpu/armv7/Makefile hunk] Signed-off-by: NTom Rini <trini@ti.com>
-
- 08 12月, 2014 1 次提交
-
-
由 Stephen Warren 提交于
The U-Boot port runs on a variety of RPi models, not just the B. So, rename the port to something slightly more generic. Signed-off-by: NStephen Warren <swarren@wwwdotorg.org> Reviewed-by: NSimon Glass <sjg@chromium.org> Tested-by: NSimon Glass <sjg@chromium.org>
-
- 01 12月, 2014 1 次提交
-
-
由 Soeren Moch 提交于
fix Kconfig for tbs2910 board to prevent crash on relocation Signed-off-by: NSoeren Moch <smoch@web.de>
-
- 28 11月, 2014 1 次提交
-
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-