- 21 2月, 2011 11 次提交
-
-
由 Lei Wen 提交于
Pantheon Family processors are highly integrated SoCs based on Sheeva_88SV331x-v5 PJ1 cpu core. Ref: http://www.marvell.com/products/processors/communications/marvell_pantheon_910_920_pb.pdf SoC versions Supported: 1) PANTHEON920 (TD) 2) PANTHEON910 (TTC) Signed-off-by: NLei Wen <leiwen@marvell.com>
-
由 Lei Wen 提交于
Since there are lots of difference between kirkwood and armada series, it is better to seperate them but still keep the most common file shared by all marvell platform in the mv-common configure file. This patch move the kirkwood only driver definitoin in mv-common to the <soc_name>/config.h. This patch is tested with compilation for armada100 and guruplug. Signed-off-by: NLei Wen <leiwen@marvell.com>
-
由 Wolfgang Denk 提交于
Commit 3c0659b5 "ARM: Avoid compiler optimization for readb, writeb and friends." introduced I/O accessors with memory barriers. Unfortunately the new write*() accessors introduced a bug: The problem is that the argument "v" gets evaluated twice. This breaks code like used here (from "drivers/net/dnet.c"): for (i = 0; i < wrsz; i++) writel(*bufp++, &dnet->regs->TX_DATA_FIFO); Use auxiliary variables to avoid such problems. Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Albert Aribaud <albert.aribaud@free.fr> Cc: Alexander Holler <holler@ahsoftware.de> Cc: Dirk Behme <dirk.behme@googlemail.com>
-
由 Alexander Stein 提交于
Signed-off-by: NAlexander Stein <alexander.stein@informatik.tu-chemnitz.de>
-
由 Tom Warren 提交于
Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Tom Warren 提交于
Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Tom Warren 提交于
Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Tom Warren 提交于
Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Fabio Estevam 提交于
Use board_early_init_f so that the full boot log output can be displayed. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
-
由 Fabio Estevam 提交于
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
-
由 Loïc Minier 提交于
Upstream linux moved from MACH_TYPE_MX51_LANGE51 to MACH_TYPE_MX51_EFIKAMX. Signed-off-by: NLoïc Minier <loic.minier@linaro.org>
-
- 20 2月, 2011 10 次提交
-
-
由 Remy Bohmer 提交于
Signed-off-by: NRemy Bohmer <linux@bohmer.net>
-
由 Remy Bohmer 提交于
These variables are only used in case CONFIG_SYS_NO_FLASH is NOT set: struct mtd_device *dev; struct part_info *part; u8 dev_type, dev_num, pnum; Signed-off-by: NRemy Bohmer <linux@bohmer.net>
-
由 Vitaly Kuzmichev 提交于
Add waiting for receiving Ethernet gadget state on the Windows host side before dropping pullup, but keep it for debug. Signed-off-by: NVitaly Kuzmichev <vkuzmichev@mvista.com>
-
由 Vitaly Kuzmichev 提交于
Port USB gadget RNDIS protocol support from linux-2.6.26 (.27 gadget stack actually has composite drivers). Signed-off-by: NVitaly Kuzmichev <vkuzmichev@mvista.com>
-
由 Vitaly Kuzmichev 提交于
Signed-off-by: NVitaly Kuzmichev <vkuzmichev@mvista.com>
-
由 Vitaly Kuzmichev 提交于
Port struct net_device_stats and statistics collecting needed for RNDIS protocol. Signed-off-by: NVitaly Kuzmichev <vkuzmichev@mvista.com>
-
由 Vitaly Kuzmichev 提交于
Disconnecting USB gadget with pending interrupt may cause its wrong handling in the next time when interface will be started again (especially actual for RNDIS). This interrupt may force the gadget to queue unexpected response before setup stage. Despite the fact that such interrupt handled after dropped pullup also may add pending response, this will not bring to any issues due to usb_ep_disable (which clears the queue) called on gadget unregistering. Signed-off-by: NVitaly Kuzmichev <vkuzmichev@mvista.com>
-
由 Simon Glass 提交于
Driver originally written by NVIDIA Corporation, modified to handle odd-length packets. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This adds support for using USB Ethernet dongles in host mode. This is just the framework - drivers will come later. A new config option called CONFIG_USB_HOST_ETHER can be defined in board config files to switch this on. The was originally written by NVIDIA and was cleaned up for release by the Chromium authors. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Changed both to use a common timeout for URB submission, since they were using different values and EHCI's was too short. Also fixed EHCI to actually check if urb submission succeeded, rather than silently continuing into the weeds. Change-Id: I7f71499ffaa05187d8e5618db2419e1606007b82 Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 16 2月, 2011 4 次提交
-
-
由 Yoshihiro Shimoda 提交于
Fix the problem which cannot build the U-boot, if we only set the CONFIG_ENV_IS_IN_SPI_FLASH. Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Nobuhiro Iwamatsu 提交于
Add infomation of RTL-8016AS to hw_info. Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org> CC: Ben Warren <biggerbadderben@gmail.com>
-
由 Wolfgang Denk 提交于
The unzip command did not provide a way for the caller to get any information about the uncompressed size. To make it better usable in scripts, we now store the uncompressed size in the `filesize' variable, like we do when for example loading a file over the network or when reading it from a file system. Following that analogy, it is only consequent to also print the size. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
The implementation of the string compare function of the "itest" command was weird, as only the length of the shortest argument was included in the compare, with the result that something like "itest.s abd == abddef" would return TRUE. Fix this. Signed-off-by: NWolfgang Denk <wd@denx.de> Acked-by: NDetlev Zundel <dzu@denx.de>
-
- 15 2月, 2011 2 次提交
-
-
由 Michal Simek 提交于
Fix ancient code which worked with MSR in a bad way. Use rtid instruction which enable IRQs and jump. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
u-boot BSP generates XILINX_USE_MSR_INSTR macro even for system with MSR=0. That's why explicitly check that MSR=1. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
- 13 2月, 2011 1 次提交
-
-
- 12 2月, 2011 12 次提交
-
-
由 Graeme Russ 提交于
-
由 Graeme Russ 提交于
-
由 Graeme Russ 提交于
-
由 Graeme Russ 提交于
-
由 Graeme Russ 提交于
-
由 Graeme Russ 提交于
x86 has always used relocation offset in the opposite sense to the ELF standard - Fix this
-
由 Graeme Russ 提交于
-
由 Graeme Russ 提交于
-
由 Graeme Russ 提交于
-
由 Graeme Russ 提交于
-
由 Graeme Russ 提交于
-
由 Graeme Russ 提交于
-