commit 0cfccb54 ("configs: Resync with savedefconfig")
removed CONFIG_USB_STORAGE from some powerpc platforms' defconfig
files, whicih would block the use case of system loading rootfs
from USB drives, add them back.
Signed-off-by: NRan Wang <ran.wang_1@nxp.com>
Reviewed-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Remove NXP powerpc P5040DS secure boot configs as they are
no longer maintained.
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

Remove NXP powerpc P5020DS board support as it is no
longer maintained.
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

Remove NXP powerpc P4080DS secure boot configs as they are
no longer maintained.
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

Remove NXP powerpc P3041DS secure boot configs as they are
no longer maintained.
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

Remove NXP powerpc P1024RDB board support as it is no
longer maintained.
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

Remove NXP powerpc P1021RDB board support as it is no
longer maintained.
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

Remove NXP powerpc P1020MBG board support as it is no
longer maintained.
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

Remove NXP powerpc P1020UTM board support as it is no
longer maintained.
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

Remove NXP powerpc P1025RDB board support as it is no
longer maintained.
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

Remove NXP powerpc P1010RDB secure boot configs as they are
no longer maintained.
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

Remove NXP powerpc p1023rdb board support as it is no
longer maintained.
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

Enable the DM_ETH and DM_MDIO config.

On P2020RDB, the eTSEC1 is connecting with a switch VSC7385,
so also enable the fixed PHY support.
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

P2020RDB implements 3 enhanced three-speed Ethernet controllers,
and the connection is shown below:
    eTSEC1: Connected to RGMII switch VSC7385
    eTSEC2: Connected to SGMII PHY VSC8221
    eTSEC3: Connected to SGMII PHY AR8021
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
[Rebased]
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

Enable the DM_ETH and DM_MDIO config.
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

The board_eth_init() is only used by legacy ethernet driver framework,
so do not compile it when DM_ETH config has been selected.
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com>
[Rebased]
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

P1010RDB implements 3 enhanced three-speed Ethernet controllers,
and the connection is shown below:
    eTSEC1: Connected to RGMII PHY AR8033
    eTSEC2: Connected to SGMII PHY AR8033
    eTSEC3: Connected to SGMII PHY AR8033
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
[Rebased]
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

Enable the DM_ETH and DM_MDIO config.

On P1020RDB, the eTSEC1 is connecting with a switch VSC7385,
so also enable the fixed PHY support.
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

The board_eth_init() is only used by legacy ethernet driver framework,
so do not compile it when DM_ETH config has been selected.
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com>
[Rebased]
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

P1020RDB implements 3 enhanced three-speed Ethernet controllers,
and the connection is shown below:
    eTSEC1: Connected to RGMII switch VSC7385
    eTSEC2: Connected to SGMII PHY VSC8221
    eTSEC3: Connected to SGMII PHY AR8021
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com>
[Rebased]
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

Add the environment 'vscfw_addr' to assign a default address for
vsc7385 firmware uploading.
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Move vsc7835 firmware uploading to board_early_init_r(), so that
the switch also can work in DM eTSEC driver.
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

The cpu_eth_init() is only used by the legacy ethernet driver framework.
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com>
[Rebased]
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

Add compatible string "gianfar" support and update the
device-tree-bindings doc.
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

The info of fixed-link PHY is described in DT node instead of
getting from MII, so detect the fixed-link PHY DT node first,
if it doesn't exist then probe the MII.
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
[Rebased]
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

For the platforms on which the eTSEC driver uses DM_ETH, convert its
MDIO controller code to also use DM_MDIO.

Note that for handling the TBI PHY (the MAC PCS for SGMII), we still
don't register a udevice for it, since we can drive it locally and there
is no point in doing otherwise.
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
[Reworked to fix gazerbeam config]
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

The MII management register block offset is different between
gianfar and etsec2 compatible devices, this patch is to fix
this issue by adding driver data for different compatible
string.

Fixes: 2932c5a8 ("net: tsec: fsl_mdio: add DM MDIO support")
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Use virtual address to access the MII block registers instead
of physical address.
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

The tsec driver now requires DM_MDIO when DM_ETH is enabled. To avoid
build errors, enable DM_MDIO in these boards' configs before we actually
add DM_MDIO support to tsec.
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

It is utterly pointless to require an MDIO bus pointer for a fixed PHY
device. The fixed.c implementation does not require it, only
phy_device_create. Fix that.
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Enable the DM_SPI and DM_SPI_FLASH in P1010RDB defconfigs except
SECBOOT defconfigs.
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Add DT nodes for eSPI slave device SPI flash.
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Add eSPI controller DT node for P1010.
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Enable the DM ESPI driver in T4240RDB defconfig.
Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
[Rebased]
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

Add ESPI slave node for T4240RDB.
Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Add ESPI controller DT node for T4240.
Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Enable the DM ESPI driver in T2080RDB defconfig.
Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
[Rebased]
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

Add ESPI slave node for T2080RDB.
Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Enable the DM ESPI driver in T1042D4RDB defconfig.
Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
[Rebased]
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

Add ESPI slave node for T1042D4RDB.
Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>