The smart spi_nor_adjust_hwcaps() does not respect the SPI flash's
hwcaps, and only looks to the controller on what can be supported.

The flash's hwcaps needs to be AND'ed before checking.

Fixes: 71025f01 ("mtd: spi-nor-core: Rework hwcaps selection")
Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NPratyush Yadav <p.yadav@ti.com>
Reviewed-by: NJagan Teki <jagan@amarulasolutions.com>

When slave drivers don't set the max_read_size, the spi-mem should
directly use data.nbytes and not limit to any size. But current
logic will limit to the max_write_size.

This commit mirrors the same changes in the dm version done in
commit 535b1fdb ("spi: spi-mem: Fix read data size issue").
Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NJagan Teki <jagan@amarulasolutions.com>

This chip has been (briefly) tested on the MediaTek MT7688 based GARDENA
smart gateway.

Datasheet: http://xmcwh.com/Uploads/2020-12-17/XM25QH64C_Ver1.1.pdfSigned-off-by: NReto Schneider <reto.schneider@husqvarnagroup.com>
Reviewed-by: NStefan Roese <sr@denx.de>
Reviewed-by: NJagan Teki <jagan@amarulasolutions.com>

- Merge in a series that cleans up and makes more consistent how we deal
  with numeric input on the CLI.  This saves a few bytes in a lot of
  places.

U-Boot mostly uses hex for value input, largely because addresses are much
easier to understand in hex.

But in some cases a decimal value is requested, such as where the value is
small or hex does not make sense in the context. In these cases it is
sometimes useful to be able to provide a hex value in any case, if only to
resolve any ambiguity.

Add this functionality, for increased flexibility.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Mention the default base of U-Boot in the command-line section. Add
examples for decimal and octal.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Take this part of the README and put it into rST format.
Signed-off-by: NSimon Glass <sjg@chromium.org>

The code to convert a character into a digit is repeated twice in this
file. Factor it out into a separate function. This also makes the code a
little easier to read.
Signed-off-by: NSimon Glass <sjg@chromium.org>

This function support decoding octal but no tests are included yet.
Add some.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Add some tests that check the behaviour of this function. These are the
same as for simple_strtoul() but with a few longer values.
Signed-off-by: NSimon Glass <sjg@chromium.org>

If we see 0x then we can assume this is the start of a hex value. It
does not seem necessary to check for a hex digit after that since it will
happen when parsing the value anyway.

Drop this check to simplify the code and reduce size. Add a few more test
cases for when a 0x prefix is used.
Signed-off-by: NSimon Glass <sjg@chromium.org>

This parameter is not documented properly since it does not cover the
meaning when the base is 0. Update this in both functions.
Signed-off-by: NSimon Glass <sjg@chromium.org>

It is a pain to have to specify the value 10 in each call. Add a new
dectoul() function and update the code to use it.
Signed-off-by: NSimon Glass <sjg@chromium.org>

It is a pain to have to specify the value 16 in each call. Add a new
hextoul() function and update the code to use it.

Add a proper comment to simple_strtoul() while we are here.
Signed-off-by: NSimon Glass <sjg@chromium.org>

This function seems to assume that the chr[] variable contains zeros at
the start, which is not always true. Use strlcpy() to be safe.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Pull request for efi-2021-10-rc2

Documentation:

* handle 'make htmldocs' warnings as errors
* add missing board/ti/index.rst

Bug fixes:

* avoid buffer overrun in TrueType console
* lib: disable CONFIG_SPL_HEXDUMP by default

pl180_mmci update and cleanup
fix rpmb routing memory alignment

%s/cerificate/certificate/
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

'make htmldocs' requires graphviz and imagemagick (at least with Sphinx
3.5.4).
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

Parameter -W for sphinx-build turns build warnings into errors. This helps
us to avoid bad patches passing Gitlab CI.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

Commit 8baeeecb ("doc: board: Move j721e document to doc/board/ti/
directory") introduced 'make htmldocs' build errors due to a missing
file board/ti/index.rst.

Fixes: 8baeeecb ("doc: board: Move j721e document to doc/board/ti/ directory")
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

sandbox TPM-emulator improvements
rST documentation and fixes for moveconfig
handle empty 'ranges' property in dtoc
patman warning for invalid tag
clean-ups to 'fdt add' command

At present if we see 'ranges' property (with no value) we assume it is a
boolean, as per the devicetree spec.

But another node may define 'ranges' with a value, forcing us to widen it
to an int array. At present this is not supported and causes an error.

Fix this and add some test cases.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reported-by: NTom Rini <trini@konsulko.com>

An int array can hold a single int so we should not need to do anything
in the widening operation. However due to a quirk in the code, an int[3]
widened with an int produced an int[4]. Fix this and add a test.

Fix a comment typo while we are here.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reported-by: NTom Rini <trini@konsulko.com>

The current name is confusing because the logic is actually backwards from
what you might expect. Rename it to needs_widening() and update the
comments.
Signed-off-by: NSimon Glass <sjg@chromium.org>

The autoboot tests are a recent addition to U-Boot, providing much-needed
coverage in this area.

A side effect of the keyed autoboot test is that this feature is enabled
in sandbox always. This changes the autoboot prompt and confuses the
pytests. Some tests become slower, for example the vboot tests take about
27s now instead of 3s.

We don't actually need this feature enabled to be able to run the tests.
Add a switch to allow sandbox to turn it on and off as needed. Use this
in the one test that needs it.

Add a command-line flag in case this is desired in normal use.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Fixes: 25c8b9f2 ("test: add first autoboot unit tests")
Reviewed-by: NSteffen Jaeckel <jaeckel-floss@eyet-services.de>

Some of the more advanced features of this tool don't work anymore since
kconfiglib was update. Update the code accordingly.
Signed-off-by: NSimon Glass <sjg@chromium.org>

The examples here are a bit messed up since the command does not match
the documentation. Use a different example instead.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Move these docs into htmldocs so they can be read there.
Signed-off-by: NSimon Glass <sjg@chromium.org>

This tool has nothing to do with testing. It is for refactoring code
automatically using a 'semantic patch' tool.

Create a new section for 'refactoring' and move it into there. It is
likely that other topics may fall under the same heading, such as
using moveconfig and search/replace tools.
Signed-off-by: NSimon Glass <sjg@chromium.org>

At present this information is hidden away. Make it more visible by
putting it first, in an intro section.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

Add a error in patman tool when the commit message contents an invalid
tag "Serie-.*" instead of "Series-.*".
Signed-off-by: NPatrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

It seems useful to show whether the address of the Control or Working
devicetree is being shown. Add support for this. Drop the confusing 0x
prefix since the command itself only accepts hex.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Clean up the code a little before changing it.
Signed-off-by: NSimon Glass <sjg@chromium.org>

It is fairly easy to handle this case and it makes the emulator more
useful, since PCRs are commonly extended several times.

Add support for this, using U-Boot's sha256 support.

For now sandbox only supports a single PCR, but that is enough for the
tests that currently exist.
Signed-off-by: NSimon Glass <sjg@chromium.org>

This is the number of PCRs, so the current check is off by one. Also the
map itself should not be checked, just the resulting pcr_index, to avoid
confusing people who read the code.

Fix these problems.
Signed-off-by: NSimon Glass <sjg@chromium.org>

At present the tpm2 emulator does not support storing the device state.
Add this so we can handle the normal vboot flow through the sandbox
executables (VPL->SPL etc.) with the TPM contents staying in place.

Note: sandbox has not yet been converted to use livetree for the state
information, since livetree does not yet support writing to the tree.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Add support for this feature in the TPM2 emulator, to support Chromium OS
vboot.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Add checking as to whether the current TPM state is valid, so we can
implement reading/writing the state.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Tidy up the missing comments for this struct.
Signed-off-by: NSimon Glass <sjg@chromium.org>