- 15 6月, 2019 1 次提交
-
-
由 Tom Rini 提交于
In order to migrate this symbol to Kconfig introduce a new symbol to guard it, CONFIG_SYS_CUSTOM_LDSCRIPT. When that is set we can then provide the exact final location o the script. Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 27 5月, 2019 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 18 5月, 2019 2 次提交
-
-
由 Trevor Woerner 提交于
While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances where these configuration items are conditional on SPL. This commit adds SPL variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates the configurations as required. Acked-by: NAlexey Brodkin <abrodkin@synopsys.com> Signed-off-by: NTrevor Woerner <trevor@toganlabs.com> [trini: Make the default depend on the setting for full U-Boot, update more zynq hardware] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Trevor Woerner 提交于
CONFIG_SYS_[DI]CACHE_OFF had been partially converted to Kconfig parameters; only for the ARC architecture. This patch turns these two parameters into Kconfig items everywhere else they are found. All of the include/configs/* and defconfig changes in this patch are for arm machines only. The Kconfig changes for arc, nds32, riscv, and xtensa have been included since these symbols are found in code under arch/{arc,nds32,riscv,xtensa}, however, no currently-defined include/configs/* or defconfigs for these architectures exist which include these symbols. These results have been confirmed with tools/moveconfig.py. Acked-by: NAlexey Brodkin <abrodkin@snopsys.com> Signed-off-by: NTrevor Woerner <trevor@toganlabs.com> [trini: Re-migrate for a few more boards] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 30 4月, 2019 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 08 1月, 2019 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 29 11月, 2018 1 次提交
-
-
由 Michal Simek 提交于
There is no need to waste 6k if none needs it. zynq_cse_nand : all -6486 bss -20 data -136 rodata -606 text -5724 zynq_cse_nor : all -6486 bss -20 data -136 rodata -606 text -5724 Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
- 26 11月, 2018 2 次提交
-
-
由 Michal Simek 提交于
U-Boot is growing that's why not needed features can be disabled: - CMDLINE_EDITING - AUTO_COMPLETE - SYS_LONGHELP Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Intention of CSE targets is not boot anything that's why also bootdelay is not necessary Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
- 20 10月, 2018 1 次提交
-
-
由 Adam Ford 提交于
This converts the following to Kconfig: CONFIG_FLASH_CFI_DRIVER CONFIG_SYS_FLASH_USE_BUFFER_WRITE CONFIG_FLASH_CFI_MTD CONFIG_SYS_FLASH_PROTECTION CONFIG_SYS_FLASH_CFI Signed-off-by: NAdam Ford <aford173@gmail.com> [trini: Re-migrate] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 26 9月, 2018 1 次提交
-
-
由 Michal Simek 提交于
Disable BOARD_LATE_INIT via Kconfig. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
- 04 9月, 2018 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 06 8月, 2018 1 次提交
-
-
This patch moves the the config SYS_MALLOC_LEN to Kconfig. It will be just for Zynq arch and to do will be for all other archs. Signed-off-by: NSiva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: NVipul Kumar <vipul.kumar@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
- 19 7月, 2018 3 次提交
-
-
由 Michal Simek 提交于
Simplify zynq_cse config by setting up ENV_SIZE via Kconfig. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
Add configuration files/dtses for mini u-boot configuration which runs on smaller footprint OCM memory. This configuration only has required parallel nor flash support. Signed-off-by: NSiva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
Add configuration files/dtses for mini u-boot configuration which runs on smaller footprint of memory. This configuration has only required nand flash support. Signed-off-by: NSiva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
- 09 4月, 2018 1 次提交
-
-
由 Mario Six 提交于
Migrate the CONFIG_BOARD_EARLY_INIT_R option to Kconfig. Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
- 23 3月, 2018 1 次提交
-
-
This patch adds new command "zynqmp" to handle zynqmp specific commands like "zynqmp secure". This secure command is used for verifying zynqmp specific secure images. The secure image can either be authenticated or encrypted or both encrypted and authenticated. The secure image is prepared using bootgen and will be in xilinx specific BOOT.BIN format. The optional key can be used for decryption of encrypted image if user key was specified while creation BOOT.BIN. Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
- 28 2月, 2018 1 次提交
-
-
由 Michal Simek 提交于
Enable networking command only when NET is enabled. And remove selecting NET for CMD_NET Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 24 2月, 2018 1 次提交
-
-
由 Adam Ford 提交于
This converts the following to Kconfig: CONFIG_BOOTP_BOOTPATH CONFIG_BOOTP_DNS CONFIG_BOOTP_GATEWAY CONFIG_BOOTP_HOSTNAME CONFIG_BOOTP_PXE CONFIG_BOOTP_SUBNETMASK CONFIG_CMDLINE_EDITING CONFIG_AUTO_COMPLETE CONFIG_SYS_LONGHELP CONFIG_SUPPORT_RAW_INITRD CONFIG_ENV_VARS_UBOOT_CONFIG Signed-off-by: NAdam Ford <aford173@gmail.com> [trini: Re-run the migration] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 11 2月, 2018 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 30 1月, 2018 3 次提交
-
-
This patch adds new target which is called as mini configuration with only nand functionality and other required basic features enabled. This will be used to run in system with small footprint and needs nand support. Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
There are two reasons for doing this change. There is still !DM driver for xilinx soft gpio IP and especially it is saving some space for memory constrained boards like cse (almost ~400B). Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
There is no reason to enable BLK by default for all boards which is just increasing memory footprint for memory contrained boards like cse. zc770s are also saving some space. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
- 15 12月, 2017 1 次提交
-
-
由 Michal Simek 提交于
This patch is fixing two issues: 1. Insufficient stack size for fat fs buffers 2. Insufficient space in malloc area Tested on zc702 and zc706. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
- 28 11月, 2017 1 次提交
-
-
由 Michal Simek 提交于
Add configuration files/dtses for mini u-boot configurations which runs out of OCM. ram top is calculated from 0 that's why +#define CONFIG_SYS_SDRAM_BASE 0xfffc0000 +#define CONFIG_SYS_SDRAM_SIZE 0x40000 was hardcoded. Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-