Change my email address, too many mails
gets to my private mail, created specific email
account just for developmement.
Signed-off-by: NRamon Fried <ramon.fried@gmail.com>

Add imx dts files to the MAINTAINERS file list, so that i.MX
devicetree related patches can be properly sent to the i.MX folks.
Reported-by: NAdam Ford <aford173@gmail.com>
Signed-off-by: NFabio Estevam <festevam@gmail.com>
Reviewed-by: NPeng Fan <peng.fan@nxp.com>

Add SPI driver support for STM32MP SoCs family.
Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>

This patch adds IWDG (Independent WatchDoG) support for
STM32MP platform.
Signed-off-by: NChristophe Kerello <christophe.kerello@st.com>
Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
Reviewed-by: NStefan Roese <sr@denx.de>

sp805 is watchdog on some NXP layerscape SoCs, adding
it's driver. Configs CONFIG_WDT_SP805, CONFIG_WDT, CONFIG_CMD_WDT
needs to be enabled to use it.
Signed-off-by: NZhao Qiang <qiang.zhao@nxp.com>
Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

Assign include/charset.h to EFI PAYLOAD.

The functions defined in this include are used by the UEFI sub-system.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

Update device tree for ocelot to add support for ocelot pcb120.
Signed-off-by: NHoratiu Vultur <horatiu.vultur@microchip.com>

Update the mmc maintainer from Jaehoon to me.

Cc: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: NPeng Fan <peng.fan@nxp.com>
Acked-by: NMarek Vasut <marex@denx.de>

This updates MAINTAINERS and git-mailrc to add me as a
co-custodian for rockchip
Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: NJagan Teki <jagan@amarulasolutions.com>
Acked-by: NTom Rini <trini@konsulko.com>

Add new defconfig files for the AM65x High Security EVM.

This defconfigs are the same as for the non-secure part, except for:
    CONFIG_TI_SECURE_DEVICE option set to 'y'
    CONFIG_FIT_IMAGE_POST_PROCESS option set to 'y'
    CONFIG_SPL_FIT_IMAGE_POST_PROCESS option set to 'y'
Signed-off-by: NAndrew F. Davis <afd@ti.com>
Reviewed-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NAndreas Dannenberg <dannenberg@ti.com>

K3 HS devices require signed binaries for boot, use the SECDEV tools
to sign the boot artifacts during build.
Signed-off-by: NAndrew F. Davis <afd@ti.com>
Reviewed-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NAndreas Dannenberg <dannenberg@ti.com>

K3 devices have High Security (HS) variants along with the non-HS already
supported. Like the previous generation devices (OMAP/Keystone2) K3
supports boot chain-of-trust by authenticating and optionally decrypting
images as they are unpacked from FIT images. Add support for this here.
Signed-off-by: NAndrew F. Davis <afd@ti.com>
Reviewed-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NAndreas Dannenberg <dannenberg@ti.com>

This updates MAINTAINERS and git-mailrc to add me as a
co-custodian for socfpga.
Signed-off-by: NSimon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Acked-by: NStefan Roese <sr@denx.de>
Acked-by: NMarek Vasut <marex@denx.de>

In order to support the Amlogic G12A clock controller,
re-architect the clock files into a meson directory.

No functionnal changes.

MAINTAINERS entry is also updated.
Signed-off-by: NJerome Brunet <jbrunet@baylibre.com>
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>

The 'exception' command allows to test exception handling.

This implementation supports ARM, x86, RISC-V and the following exceptions:
* 'breakpoint' - prefetch abort exception (ARM 32bit only)
* 'unaligned'  - data abort exception (ARM only)
* 'undefined'  - undefined instruction exception
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

Add the DM_MMC-compatible DesignWare MMC driver support for Synopsys
ARC devboards. It is created to switch ARC devboards to use DM_MMC.

It required information such as clocks (Bus Interface Unit clock,
Card Interface Unit clock) and SDIO bus width.
Signed-off-by: NEugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: NAlexey Brodkin <abrodkin@synopsys.com>

Alignment with kernel driver name & binding
introduced by https://patchwork.kernel.org/cover/10761943/
to use the final marketing name = STPMIC1.
Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: NLukasz Majewski <lukma@denx.de>

Missed few mails from openedev, since most of the day I look at
amarulasolutions mail so update the same.
Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>

Signed-off-by: NLukasz Majewski <lukma@denx.de>

The EFI PAYLOAD will use git://git.denx.de/u-boot-efi.git in future.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

This patch does the following changes to the u-boot-marvell maintainers
entry:

- Add Armada-7k/8k to the list
- Remove Prafulla and Luka since they have been silent on the list for
  a long time. Please speak up, if you would like to continue or better
  start maintaining.
- Add multiple Marvell / MVEBU related driver directories and files
Signed-off-by: NStefan Roese <sr@denx.de>
Cc: Prafulla Wadaskar <prafulla@marvell.com>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Tom Rini <trini@konsulko.com>
Acked-by: NLuka Perkov <luka.perkov@sartura.hr>
Signed-off-by: NStefan Roese <sr@denx.de>

The MAINTAINERS file was copied from Linux Kernel along with all its
statuses of maintainership.  However tools/genboardscfg.py accepts only
Maintained, Supported and Orphan.  Remove then the Odd Fixes and
Obsolete from MAINTAINERS file to avoid confusion.
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>

Currently, there is no easy way to add or modify UEFI variables.
In particular, bootmgr supports BootOrder/BootXXXX variables, it is
quite hard to define them as u-boot variables because they are represented
in a complicated and encoded format.

The new command, efidebug, helps address these issues and give us
more friendly interfaces:
 * efidebug boot add: add BootXXXX variable
 * efidebug boot rm: remove BootXXXX variable
 * efidebug boot dump: display all BootXXXX variables
 * efidebug boot next: set BootNext variable
 * efidebug boot order: set/display a boot order (BootOrder)
Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

"env [print|set] -e" allows for handling uefi variables without
knowing details about mapping to corresponding u-boot variables.
Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

Heinrich is going to take over maintainership of the efi_loader tree
going forward.

To ensure that I will still receive review mails at least, add me as
reviewer with a stable email address.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: NTom Rini <trini@konsulko.com>

Matthias Brugger agreed to take over maintainership from me for the
Raspberry Pi tree. Add him to the MAINTAINERS file instead.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NTom Rini <trini@konsulko.com>

Add a new defconfig file for the AM57xx High Security EVM. This config
is specific for the case of USB/UART booting.
Signed-off-by: NAndrew F. Davis <afd@ti.com>
Reviewed-by: NTom Rini <trini@konsulko.com>

Add a new defconfig file for the DRA7xx High Security EVM. This config
is specific for the case of USB booting.
Signed-off-by: NAndrew F. Davis <afd@ti.com>
Reviewed-by: NTom Rini <trini@konsulko.com>

Add myself as co-maintainer for U-Boot SPI NOR subsystem.
Signed-off-by: NVignesh R <vigneshr@ti.com>
Reviewed-by: NJagan Teki <jagan@openedev.com>
[jagan: drop mtd/spi file from SPI entry]
Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>

Update Atmel AT91 maintainership
Signed-off-by: NEugen Hristev <eugen.hristev@microchip.com>
Acked-by: NNicolas Ferre <nicolas.ferre@microchip.com>

Change maintainers to Prabhakar Kushwaha for fsl-qoriq, mpc85xx
and mpc86xx.
Signed-off-by: NYork Sun <york.sun@nxp.com>
Reviewed-by: NTom Rini <trini@konsulko.com>
Acked-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

Move file ocelot_switch to mscc_eswitch to prepare to add
new net drivers for other MSCC SoCs.
Signed-off-by: NHoratiu Vultur <horatiu.vultur@microchip.com>

Add entry for Amlogic SoC maintained files and the freshly
created mailing-list.
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>

I prefer to use my personal email address for U-Boot related work.
Signed-off-by: NFabio Estevam <festevam@gmail.com>

Handle correctly directory arch/arm/mach-stm32mp/ :
Add a trailing slash to include all files
and subdirectory files.
Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>

Similar changes was done for Zynq in past and this patch just follow
this pattern to separate cpu code from SoC code.

Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/*
And also fix references to these files.

Based on
"ARM: zynq: move SoC sources to mach-zynq"
(sha1: 0107f240)
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

This patch adds support for the Microsemi Ethernet switch present on
Ocelot SoCs.
Signed-off-by: NGregory CLEMENT <gregory.clement@bootlin.com>
Reviewed-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>

Add myself as the maintainer of CZ.NIC's Turris Omnia and Turris Mox
projects.
Signed-off-by: NMarek Behún <marek.behun@nic.cz>
Reviewed-by: NStefan Roese <sr@denx.de>
Signed-off-by: NStefan Roese <sr@denx.de>

Add device tree based on evaluation board pcb112.
Signed-off-by: NHoratiu Vultur <horatiu.vultur@microchip.com>

Add device tree based on evaluation board pcb110.
Signed-off-by: NHoratiu Vultur <horatiu.vultur@microchip.com>