Signed-off-by: NWolfgang Denk <wd@denx.de>

The commit 04a9e118
cause the 83xx immap broken, so the DMA and PCI will
be failed.

The patch fix the struct spi8xxx and rm struct spi83xx.
Signed-off-by: NDave Liu <daveliu@freescale.com>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>

Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>

Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>

Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>
Signed-off by: John Rigby <jrigby@freescale.com>

Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>

Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>

Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>

Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>
Signed-off by: John Rigby <jrigby@freescale.com>

Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>

Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>

Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>

Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>

Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>

Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>

Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>

Definition update and change from 16bit to 32bit
Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>

Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>

Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>

Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>

Add CF specific modules header files
Signed-off-by: NTsiChung Liew <Tsi-Chung.Liew@freescale.com>
Signed-off-by: NJohn Rigby <jrigby@freescale.com>

..and rm unused CONFIG_FSL_SPI define
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>

- Fix EEPROM_data structure definition according to System EEPROM Data Format.
- Read MAC addresses from EEPROM to ethXaddr before saving ethXaddr to
  bd->bi_ethaddr.
Signed-off-by: NHaiying Wang <Haiying.Wang@freescale.com>

Enable command-line editing for all MPC86xx boards.
Signed-off-by: NTimur Tabi <timur@freescale.com>

This patch implements the fsl_spi driver on the MPC8349EMDS evaluation board.
This board has an ST M25P40 4Mbit EEPROM on its SPI bus
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>

This patch adds support for the SPI controller found on Freescale PowerPC
processors such as the MCP834x family.  Additionally, a new config option,
CONFIG_HARD_SPI, is added for general purpose SPI controller use.
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>

The commit 9e896478
will cause the mpc8315erdb board can't boot up.

The patch fix that bug, and remove the duplicated #ifdef
CFG_SPCR_TSECEP code and clean the SCCR_TSEC2 for
MPC8313E processor.
Signed-off-by: NDave Liu <daveliu@freescale.com>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>

Signed-off-by: NLarry Johnson <lrj@acm.org>

[PATCH] net: add 'ethrotate' environment variable

This patch replaces the buildtime configuration option
CONFIG_NET_DO_NOT_TRY_ANOTHER through the 'ethrotate' runtime
configuration veriable. See README.
Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd-electronics.com>
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

Signed-off-by: NStefan Roese <sr@denx.de>

- Moved some common code to netstal/common/nm_bsp.c.
- sdram initialisation goes go netstal/common/fixed_sdram.c.
- Added support for POST.
- Stylistic cleanups (multi-line comments/ enforce 80 colomn width)
Signed-off-by: NNiklaus Giger <niklaus.giger@netstal.com>

Added some routines used by all Netstal boards:
- nm_bsp.c: - nm_show_print and
        -  common_misc_init_r
        - set_params_for_sw_install. Very specific code to handle our SW
          installation procedure
- fixed_sdram.c: Common routines for HCU4 (and upcoming) MCU25 boards
  to handle sdram initialization.
- nm.h: Common header
Signed-off-by: NNiklaus Giger <niklaus.giger@netstal.com>

- Moved some common code to nestal/common/nm_bsp.c.
- Added support for the vxWorks EDR.
- Enable trace for Lauterbach, if present.
- Added support for POST.
- Stylistic cleanups (multi-line comments/ enforce 80 colomn width)
Signed-off-by: NNiklaus Giger <niklaus.giger@netstal.com>