- 18 12月, 2019 5 次提交
-
-
由 Peter Robinson 提交于
Add gd25q128 128Mbit chip to spi-nor id table. Tested on Pinebook Pro Signed-off-by: NPeter Robinson <pbrobinson@gmail.com> Acked-by: NVignesh Raghavendra <vigneshr@ti.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> # roc-rk3399-pc Reviewed-by: NJagan Teki <jagan@amarulasolutions.com>
-
https://gitlab.denx.de/u-boot/custodians/u-boot-stm由 Tom Rini 提交于
- Fix stm32mp1 crash (bootstage) and warning (cls)
-
由 Patrick Delaunay 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com> Acked-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
This patch is only a temporarily workaround for crash introduced by commit ac9cd480 ("bootstage: Correct relocation algorithm"). The crash occurs because the bootstage struct is not correctly aligned when BOOTSTAGE feature is activated. Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com> Acked-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
Activate by default the command CLS (clear screen); this command used in pxe or sysboot command (DISTRO support) when the "menu background" keyword is present. This patch avoid the warning "Unknown command 'cls'" with extlinux.conf: # Generic Distro Configuration file generated by OpenEmbedded menu title Select the boot mode MENU BACKGROUND /splash.bmp TIMEOUT 20 DEFAULT stm32mp157c-ev1-emmc LABEL stm32mp157c-ev1-emmc KERNEL /uImage FDT /stm32mp157c-ev1.dtb APPEND root=/dev/mmcblk1p4 rootwait rw console=ttySTM0,115200 ... Retrieving file: /mmc0_stm32mp157c-ev1_extlinux/extlinux.conf 614 bytes read in 36 ms (16.6 KiB/s) Retrieving file: /splash.bmp 46180 bytes read in 40 ms (1.1 MiB/s) Unknown command 'cls' - try 'help' Select the boot mode 1: stm32mp157c-ev1-sdcard ... Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com> Acked-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
- 16 12月, 2019 1 次提交
-
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 14 12月, 2019 8 次提交
-
-
由 Tom Rini 提交于
- Assorted minor fixes
-
由 Grygorii Strashko 提交于
Move BOOTP_DNS2 and PHY_TI from dra7xx_evm.h to dra7xx_evm_defconfig. Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 Heinrich Schuchardt 提交于
With commit 37db55b7 ("linux/types.h: fix typo unchar") we have a duplicate typedef for uchar. As linux/types.h is included in common.h we don't need another typedef for uchar there. Fixes: 37db55b7 ("linux/types.h: fix typo unchar") Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Heinrich Schuchardt 提交于
Describe that a signature node can be added to a binary device tree using the mkimage tool. Provide an example device tree node. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
Boris' email address has changed. Copy two entries from the Linux .mailmap file. Boris confirmed the new email address: https://lists.denx.de/pipermail/u-boot/2019-December/393774.html Cc: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Rasmus Villemoes 提交于
Commit 656d8da9 (doc: Remove duplicated documentation directory) got rid of most of Documentation/. But there's still an obviously useless .gitignore left behind. Also, there's a copy of the linux kernel's net/ethernet.txt binding imported from v5.0, while the existing one in doc/ is from 4.0-rc1. So replace the latter by the former, and making Documentation/ finally empty. Signed-off-by: NRasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: NSimon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
-
由 Rasmus Villemoes 提交于
Signed-off-by: NRasmus Villemoes <rasmus.villemoes@prevas.dk>
-
由 Hannes Schmelzer 提交于
commit 3b3e8a37 ("arm: dts: am335x: sync cpsw/mdio/phy with latest linux - drop phy_id") did sync with recent linux kernel and replaced therefore the 'phy_id' property with a phy-handle pointing to the mdio. This is OK for linux, but introduces trouble with the already running vxWorks on this target. So this commit here re-inerts the phy_id property beside the phy-handle property to be compatible with both. Signed-off-by: NHannes Schmelzer <hannes.schmelzer@br-automation.com>
-
- 11 12月, 2019 8 次提交
-
-
https://gitlab.denx.de/u-boot/custodians/u-boot-raspberrypi由 Tom Rini 提交于
- fix DRAM bank detection for unified binary - fix 32bit RPi4 config
-
https://gitlab.denx.de/u-boot/custodians/u-boot-i2c由 Tom Rini 提交于
i2c bugfixes for 2020.01 - i2c: i2c_cdns: fix write timeout on fifo boundary fixes timout issue when writting number of bytes is multiple of the FIFO depth.
-
https://gitlab.denx.de/u-boot/custodians/u-boot-atmel由 Tom Rini 提交于
- First set of u-boot-atmel fixes for 2020.01 cycle: This set includes a small fix for gpio bank names, one for removing unused headers (also touches some other boards), and a fix for the QSPI env read on one of the boards.
-
由 Matthias Brugger 提交于
The rpi_4_32b_defconfig states that only one DRAM bank is present. This leads to a wrong configuration of the available DRAM. Fix this by setting the DRAM bank config accordingly. Fixes: 193279d7 ("RPI: Add defconfigs for rpi4 (32/64)") Signed-off-by: NMatthias Brugger <mbrugger@suse.com>
-
由 Matthias Brugger 提交于
Up to now we only update the DRAM banks when we are define CONFIG_BCM2711. But our one binary approach uses a config that supports BCM2837 and BCM2711. As a result we only see one gibibyte of RAM on Raspberry Pi 4, even if it has more RAM. Fix this by calling dram_init_banksize. Fixes: 56940906 ("ARM: defconfig: add unified config for RPi3 and RPi4") Signed-off-by: NMatthias Brugger <mbrugger@suse.com>
-
由 Matthias Brugger 提交于
To update the dram bank information from device-tree we use fdtdec_decode_ram_size() which expectes the the size-cells and address-cells to be defined in the memory node. For normal system RAM these values are defined in the root node. When the values differ from the default values defined in the spec, we can end up with wrong RAM bank information. Switch to the "standard" way to update the RAM bank information to avoid this. Fixes: 9de5b89e ("rpi4: enable dram bank initialization") Signed-off-by: NMatthias Brugger <mbrugger@suse.com>
-
由 Michael Auchter 提交于
This fixes an issue that would cause I2C writes to timeout when the number of bytes is a multiple of the FIFO depth (i.e. 16 bytes). Within the transfer loop, after writing the data register with a new byte to transfer, if the transfer size equals the FIFO depth, the loop pauses until the INTERRUPT_COMP bit asserts to indicate data has been sent. This same check is performed after the loop as well to ensure data has been transferred prior to returning. In the case where the amount of data to be written is a multiple of the FIFO depth, the transfer loop would wait for the INTERRUPT_COMP bit to assert after writing the final byte, and then wait for this bit to assert once more. However, since the transfer has finished at this point, no new data has been written to the data register, and hence INTERRUPT_COMP will never assert. Fix this by only waiting for INTERRUPT_COMP in the transfer loop if there's still data to be written. Signed-off-by: NMichael Auchter <michael.auchter@ni.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
https://gitlab.denx.de/u-boot/custodians/u-boot-video由 Tom Rini 提交于
- fix crash and board reset when drawing RLE8 bitmaps bigger than the framebuffer resolution - reduce dead code in video and console uclass routines (tested on mx53cx9020, sama5d2_xplained, stm32mp157c-ev1, stm32f746-disco, stm32f769-disco and wandboard)
-
- 10 12月, 2019 18 次提交
-
-
由 Swapna Gurumani 提交于
In the initial SPI flash setup, the default bus mode being used was 3, which is incorrect, causing a CRC error when the ENV was being read from QSPI. Setting the default bus mode to 0 which is the correct mode. Signed-off-by: NSwapna Gurumani <swapna.gurumani@microchip.com>
-
https://gitlab.denx.de/u-boot/custodians/u-boot-riscv由 Tom Rini 提交于
- Increase stack size to avoid a stack overflow during distro boot. - Add hifive-unleashed-a00.dts for SIFIVE FU540. - Add OF_SEPARATE support for SIFIVE FU540. - Add SPL support for Andes AX25 AE350. - Improve U-Boot SPL / OpenSBI smp boot flow for RISC-V.
-
由 Lukas Auer 提交于
At the start, OpenSBI relocates itself to its link address. If the link address ranges of U-Boot SPL and OpenSBI overlap, the relocation can lead to code corruption if a hart is still running U-Boot SPL during relocation. To avoid this problem, the main hart is specified as the preferred boot hart to perform the relocation. This fixes the code corruption problems based on the assumption that since the main hart schedules the secondary harts to enter OpenSBI, it will be the last to enter OpenSBI. However it was reported that this assumption is not always correct. To make sure the assumption always holds true, wait for all secondary harts to acknowledge the call-function request before entering OpenSBI on the main hart. Reported-by: NRick Chen <rick@andestech.com> Signed-off-by: NLukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: NRick Chen <rick@andestech.com> Tested-by: NRick Chen <rick@andestech.com> Reviewed-by: NAnup Patel <anup.patel@wdc.com>
-
由 Lukas Auer 提交于
Add a wait option to smp_call_function() to wait for the secondary harts to acknowledge the call-function request. The request is considered to be acknowledged once each secondary hart has cleared the corresponding IPI. As part of the call-function request, the secondary harts invalidate the instruction cache after clearing the IPI. This adds a delay between acknowledgment (clear IPI) and fulfillment (call function) of the request. We want to use the acknowledgment to be able to judge when the request has been completed. Remove the delay by clearing the IPI after cache invalidation and just before calling the function from the request. Signed-off-by: NLukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: NRick Chen <rick@andestech.com> Tested-by: NRick Chen <rick@andestech.com> Reviewed-by: NAnup Patel <anup.patel@wdc.com>
-
由 Lukas Auer 提交于
Add the function riscv_get_ipi() for reading the pending status of IPIs. The supported controllers are Andes' Platform Level Interrupt Controller (PLIC), the Supervisor Binary Interface (SBI), and SiFive's Core Local Interruptor (CLINT). Signed-off-by: NLukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: NRick Chen <rick@andestech.com>
-
由 Lukas Auer 提交于
OpenSBI uses a relocation lottery to determine the hart to relocate OpenSBI to its link address. In the U-Boot SPL boot flow, the main hart schedules the secondary harts to enter OpenSBI before doing so itself. One of the secondary harts will therefore always be the winner of the relocation lottery. This is problematic if the link address ranges of OpenSBI and U-Boot SPL overlap. OpenSBI will be relocated and therefore overwrite U-Boot SPL while some harts may still run it, leading to code corruption. Avoid this problem by specifying the main hart as the preferred boot hart to perform the OpenSBI relocation. The main hart will be the last hart to enter OpenSBI, relocation can therefore occur safely. The boot hart field was added to version 2 of the OpenSBI FW_DYNAMIC info structure. The header file include/opensbi.h is synchronized with include/sbi/fw_dynamic.h from the OpenSBI project to update the info structure. The header file is recent as of commit 7a13beb21326 ("firmware: Add preferred boot HART field in struct fw_dynamic_info"). Reported-by: NRick Chen <rick@andestech.com> Suggested-by: NAnup Patel <Anup.Patel@wdc.com> Signed-off-by: NLukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: NRick Chen <rick@andestech.com> Tested-by: NRick Chen <rick@andestech.com> Reviewed-by: NAnup Patel <anup.patel@wdc.com>
-
由 Rick Chen 提交于
Add descriptions about U-Boot SPL feature and how to build and run. Signed-off-by: NRick Chen <rick@andestech.com> Cc: KC Lin <kclin@andestech.com> Cc: Alan Kao <alankao@andestech.com>
-
由 Rick Chen 提交于
Those are required for cfi-flash driver to get correct address information. Also modify size description correctly. Signed-off-by: NRick Chen <rick@andestech.com> Cc: KC Lin <kclin@andestech.com> Cc: Alan Kao <alankao@andestech.com>
-
由 Rick Chen 提交于
Add CPU2 and CPU3 information in cpus node to support four cores SMP booting. Signed-off-by: NRick Chen <rick@andestech.com> Cc: KC Lin <kclin@andestech.com> Cc: Alan Kao <alankao@andestech.com>
-
由 Rick Chen 提交于
For RV64, it will use sd instruction to clear t0 register, and the increament will be 8 bytes. So if the difference between__bss_strat and __bss_end was not 8 bytes aligned, the clear bss loop will overflow and acks like system hang. Signed-off-by: NRick Chen <rick@andestech.com> Cc: KC Lin <kclin@andestech.com> Cc: Alan Kao <alankao@andestech.com>
-
由 Rick Chen 提交于
When ax25-ae350 try to enable v5l2 cache driver in SPL configuration, it need this option for cache support in SPL. Signed-off-by: NRick Chen <rick@andestech.com> Cc: KC Lin <kclin@andestech.com> Cc: Alan Kao <alankao@andestech.com>
-
由 Rick Chen 提交于
The mcache_ctl csr only can be manipulated in M mode. Add SPL_RISCV_MMODE for U-Boot SPL to control cache operation. Signed-off-by: NRick Chen <rick@andestech.com> Cc: KC Lin <kclin@andestech.com> Cc: Alan Kao <alankao@andestech.com>
-
由 Rick Chen 提交于
Fix two wrong settings of andes plic driver as below: 1. Fix wrong pending register base definition. 2. Declaring the en variable in enable_ipi() as unsigned int instead of int can help to fix wrong plic enabling setting in RV64. Signed-off-by: NRick Chen <rick@andestech.com> Cc: KC Lin <kclin@andestech.com> Cc: Alan Kao <alankao@andestech.com>
-
由 Rick Chen 提交于
To get memory size from device tree instead of get_ram_size(). This can avoid memory access fault in U-Boot proper after PMP configurations in OpenSBI. Signed-off-by: NRick Chen <rick@andestech.com> Cc: KC Lin <kclin@andestech.com> Cc: Alan Kao <alankao@andestech.com>
-
由 Rick Chen 提交于
This patch provides four configurations which can support U-Boot SPL to boot from RAM or FLASH and then boot FIT image including OpenSBI FW_DYNAMIC firmware and U-Boot proper images from RAM or MMC boot devices. With ae350_rv[32|64]_spl_defconfigs: U-Boot SPL will be loaded by gdb or FSBL and runs in RAM in machine mode and then load FIT image from RAM device on AE350. With ae350_rv[32|64]_spl_xip_defconfigs: U-Boot SPL can be burned into SPI flash and run in flash in machine mode and then load FIT image from SPI flash or MMC device on AE350. Signed-off-by: NRick Chen <rick@andestech.com> Cc: KC Lin <kclin@andestech.com> Cc: Alan Kao <alankao@andestech.com>
-
由 Rick Chen 提交于
The U-Boot SPL will boot in M mode and load the FIT image which include OpenSBI and U-Boot proper images. After loading progress, it will jump to OpenSBI first and then U-Boot proper which will run in S mode. Also remove V5L2_CACHE due to U-Boot SPL code size consideration. Without this concern, it can be enable manually for performance. Signed-off-by: NRick Chen <rick@andestech.com> Cc: KC Lin <kclin@andestech.com> Cc: Alan Kao <alankao@andestech.com>
-
由 Rick Chen 提交于
This would help to make the necessary changes in drivers and device trees in U-Boot tree itself. This feature would also be helpful to not pass dtb during opensbi builds. Signed-off-by: NJagan Teki <jagan@amarulasolutions.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NAnup Patel <anup.patel@wdc.com> Signed-off-by: NRick Chen <rick@andestech.com>
-
由 Jagan Teki 提交于
Sync the hifive-unleashed-a00 dts from Linux with below commit details: commit <2993c9b04e616df0848b655d7202a707a70fc876> ("riscv: dts: HiFive Unleashed: add default chosen/stdout-path") Idea is to periodically sync the dts from Linux instead of tweaking internal changes one after another, so better not add any intermediate changes in between. This would help to maintain the dts files easy and meaningful since we are reusing device tree files from Linux. Signed-off-by: NJagan Teki <jagan@amarulasolutions.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NAnup Patel <anup.patel@wdc.com>
-