- 28 7月, 2019 2 次提交
-
-
由 Adam Ford 提交于
OHCI was added with DM_USB support, so there are a few unneeded items in the header file that can be removed. This also unifies da850evm with NOR and NAND booting options so all have OHCI support. Signed-off-by: NAdam Ford <aford173@gmail.com> [trini: Migrate da850_am18xxevm] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Adam Ford 提交于
The OMAP35 and AM/DM37 Torpedo boards do not have a USB tranceiver connected to the USB host port, so this patch removes it from the defconfig files. Signed-off-by: NAdam Ford <aford173@gmail.com>
-
- 27 7月, 2019 5 次提交
-
-
由 Adam Ford 提交于
Like the other Logic PD OMAP35/DM37 boards, this board has device tree enabled for U-Boot. This patch converts the board to enable SPL_OF_CONTROL and further shrinks the device tree in SPL to limit it to UART3 (console), MMC1, i2c1, and GPIO4 (for mmc1 CD and WP). There appears to be a bug in minicom so users may need to switch the minicom terminal emulation to ANSI from VT102 due to the junk that gets pushed out of the UART on startup. Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Adam Ford 提交于
The PBIAS regulator is available on OMAP3's, and it's shared on the AM35, so this patch enables that in U-Boot along with GPIO based regulators. Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Lokesh Vutla 提交于
Add initial defconfig support for J721e that runs on A72. Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com> [trini: Add MAINTAINERS entry] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Lokesh Vutla 提交于
Add initial defconfig support for J721e that runs on R5. Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com> [trini: Add MAINTAINERS file] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Lokesh Vutla 提交于
k3_rproc driver is specifically meant for controlling an arm64 core using TISCI protocol. So rename the driver, Kconfig symbol, compatible and functions accordingly. While at it drop this remoteproc selection for a53 defconfig. Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
-
- 26 7月, 2019 4 次提交
-
-
由 Bartosz Golaszewski 提交于
Now that we removed all legacy boards selecting TI_EMAC we can completely convert the driver code to using the driver model. This patch also updates all remaining users of davinci_emac. Signed-off-by: NBartosz Golaszewski <bgolaszewski@baylibre.com> Tested-by: Adam Ford <aford173@gmail.com> #am3517-evm & da850-evm Reviewed-by: NRamon Fried <rfried.dev@gmail.com>
-
由 Jianchao Wang 提交于
The LS1021A-TSN is a development board built by VVDN/Argonboards in partnership with NXP. It features the LS1021A SoC and the first-generation SJA1105T Ethernet switch for prototyping implementations of a subset of IEEE 802.1 TSN standards. Supported boot media: microSD card (via SPL), QSPI flash. Rev. A of the board uses a Spansion S25FL512S_256K serial flash, which is 64 MB in size and has an erase sector size of 256KB (therefore, flashing the RCW would erase part of U-Boot). Rev. B and C of the board use a Spansion S25FL256S1 serial flash, which is only 32 MB in size but has an erase sector size of 64KB (therefore the RCW image can be flashed without erasing U-Boot). To avoid the problems above, the U-Boot base address has been selected at 0x100000 (the start of the 5th 256KB erase sector), which works for all board revisions. Actually 0x40000 would have been enough, but 0x100000 is common for all Layerscape devices. eTSEC3 is connecting directly to SJA1105 via an RGMII fixed-link, but SJA1105 is currently not supported by uboot. Therefore, eTSEC3 is disabled. Signed-off-by: NXiaoliang Yang <xiaoliang.yang_1@nxp.com> Signed-off-by: NMingkai Hu <mingkai.hu@nxp.com> Signed-off-by: NJianchao Wang <jianchao.wang@nxp.com> Signed-off-by: NChangming Huang <jerry.huang@nxp.com> Signed-off-by: NVladimir Oltean <olteanv@gmail.com> [Vladimir] Code taken from https://github.com/openil/u-boot (which itself is mostly copied from ls1021a-iot) and adapted with the following changes: - Add a008850 errata workaround - Converted eTSEC, MMC to DM to avoid all build warnings - Plugged in distro boot feature, including support for extlinux.conf - Added defconfig for QSPI boot - Added the board/freescale/ls1021atsn/README.rst for initial setup - Increased CONFIG_SYS_MONITOR_LEN so that the SPL malloc pool does not get overwritten during copying of the u-boot.bin payload from MMC to DDR. Acked-by: NJoe Hershberger <joe.hershberger@ni.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Bin Meng 提交于
Now that we have added driver model support to the TSEC driver, convert ls1021atwr board to use it. This depends on previous DM series for ls1021atwr: http://patchwork.ozlabs.org/patch/561855/Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Signed-off-by: NVladimir Oltean <olteanv@gmail.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com> [Vladimir] Made the following changes: - Added 'status = "disabled";' for all Ethernet ports in ls1021a.dtsi - Fixed the confusion between the SGMII/TBI PCS for enet0 and enet1 - a mistake ported over from Linux. Each SGMII PCS lies on the private MDIO bus of the interface (and the RGMII enet2 has no SGMII PCS). - Added CONFIG_DM_ETH to all ls1021atwr_* defconfigs - Completely removed non-DM_ETH support from ls1021atwr - Changed "compatible" string from "fsl,tsec-mdio" to "fsl,etsec2-mdio" and from "fsl,tsec" to "fsl,etsec2" to match Linux
-
由 Alex Marginean 提交于
Enables ethernet, MDIO, PHY drivers for LS1028A RDB and QDS. Signed-off-by: NAlex Marginean <alexm.osslist@gmail.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
- 25 7月, 2019 1 次提交
-
-
由 Ruslan Trofymenko 提交于
Add sandbox test for 'ab_select' command. Test: ./test/py/test.py --bd sandbox --build -k test_ab Signed-off-by: NRuslan Trofymenko <ruslan.trofymenko@linaro.org> Signed-off-by: NIgor Opaniuk <igor.opaniuk@gmail.com> Signed-off-by: NSam Protsenko <semen.protsenko@linaro.org> Reviewed-by: NAlistair Strachan <astrachan@google.com> Reviewed-by: NSam Protsenko <semen.protsenko@linaro.org> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 22 7月, 2019 2 次提交
-
-
由 Patrick Delaunay 提交于
Add support of STM32MP1 rtc driver. Enable it for basic and trusted configurations. Signed-off-by: NBenjamin Gaignard <benjamin.gaignard@st.com>
-
由 Patrick Delaunay 提交于
Activate the remote processor support for stm32mp15 configs. Signed-off-by: NFabien Dessenne <fabien.dessenne@st.com>
-
- 20 7月, 2019 13 次提交
-
-
由 Kever Yang 提交于
Default to use ARM generic timer in ARM64, switch from rk timer to generic timer. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
Default to use ARM generic timer in ARM64, switch from rk timer to generic timer. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
Enable TPL for evb-rk3288 so that we can have a free size limited SPL. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
We share the same TPL_LDSCRIPT for all rk3288 board, add default value in Kconfig. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
We needs SPL LIBCOMMON and LIBGENERIC for all boards, so we can enable them by default and no need to define in each board. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
We needs SPL LIBCOMMON and LIBGENERIC for all boards, so we can enable them by default and no need to define in each board. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
We needs SPL LIBCOMMON and LIBGENERIC for all boards, so we can enable them by default and no need to define in each board. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
We needs SPL LIBCOMMON and LIBGENERIC for all boards, so we can enable them by default and no need to define in each board. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
There is no difference in rk3368 board use for SYS_MALLOC_F_LEN, so we can use default value. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
There is no difference in rk3328 board use for SYS_MALLOC_F_LEN, so we can use default value. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
There is no difference in rk3399 board use for SYS_MALLOC_F_LEN, so we can use default value. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
There is no difference in rk3288 board use for SYS_MALLOC_F_LEN, so we can use default value. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
There is no difference in rk322x board use for SYS_MALLOC_F_LEN, so we can use default value. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
- 21 7月, 2019 2 次提交
-
-
由 Jagan Teki 提交于
Due to foot-print issues, we have LPDDR4 code can be marked as CONFIG_RAM_RK3399_LPDDR4. So, enable it for Rock-PI-4 board. Signed-off-by: NJagan Teki <jagan@amarulasolutions.com> Reviewed-by: NKever Yang <Kever.yang@rock-chips.com>
-
由 Jagan Teki 提交于
Due to foot-print issues, we have LPDDR4 code can be marked as CONFIG_RAM_RK3399_LPDDR4. So, enable it for Rockpro64 board. Signed-off-by: NJagan Teki <jagan@amarulasolutions.com> Reviewed-by: NKever Yang <Kever.yang@rock-chips.com>
-
- 19 7月, 2019 6 次提交
-
-
由 Anup Patel 提交于
This patch extends SiFive FU540 board support to setup ethaddr env variable based on board serialnum read from OTP. Signed-off-by: NAnup Patel <anup.patel@wdc.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Peter Robinson 提交于
Enable USB3 support via the dwc3 XHCI driver. Signed-off-by: NPeter Robinson <pbrobinson@gmail.com> Reviewed-by: NKever Yang <kever.yang@rock-chips.com> Reviewed-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
-
由 Peter Robinson 提交于
As the Rock960 doesn't have an onboard wired ethernet interface it's useful to have some common USB wired ethernet devices added to enable testing. Signed-off-by: NPeter Robinson <pbrobinson@gmail.com> Reviewed-by: NKever Yang <kever.yang@rock-chips.com> Reviewed-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
-
由 Peter Robinson 提交于
Enable the SDMA controller so the eMMC connected to the SDHCI controller (sdhci@fe330000) can make use of it. Signed-off-by: NPeter Robinson <pbrobinson@gmail.com> Reviewed-by: NKever Yang <kever.yang@rock-chips.com> Reviewed-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
-
由 Peter Robinson 提交于
We have both PMIC and Regulator functionality so it's useful to be able to see output and debug with the commands enabled. Signed-off-by: NPeter Robinson <pbrobinson@gmail.com> Reviewed-by: NKever Yang <kever.yang@rock-chips.com> Reviewed-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
-
由 Peter Robinson 提交于
The Rock960 doesn't contain SPI flash so drop related config options. Signed-off-by: NPeter Robinson <pbrobinson@gmail.com> Reviewed-by: NKever Yang <kever.yang@rock-chips.com> Reviewed-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
-
- 18 7月, 2019 5 次提交
-
-
由 Oleksandr Zhadan 提交于
Removed one of the defconfig(obsoleted) file and unused CONFIG_MMC_SPI definition to avoid confusion about if this board using non-DM stuff or not. uCP1020 is completely DM free board, tested and runs well. Signed-off-by: NOleksandr Zhadan <oleks@arcturusnetworks.com> Signed-off-by: NMichael Durrant <mdurrant@arcturusnetworks.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Weijie Gao 提交于
This patch changes mt7629_rfb to use ARM's generic arch timer instead of MediaTek's soc timer. Signed-off-by: NWeijie Gao <weijie.gao@mediatek.com>
-
由 Tom Rini 提交于
In order to save a little space in SPL, do not use the asm versions of memcpy/memset. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Joel Stanley 提交于
Tests in test/py/tests/test_env.py like this fail without CONFIG_HUSH_PARSER: => => printenv test_env_0 ## Error: "test_env_0" not defined => .=> setenv test_env_0 => => echo $test_env_0 $test_env_0 => F We also want a mac address so the ethernet device works in qemu. Signed-off-by: NJoel Stanley <joel@jms.id.au>
-
由 Joel Stanley 提交于
The aspeed board does not have an upstream MMC driver. As CONFIG_MMC defaults on, the board would fail to build due to the CONFIG_DM_MMC migration: ===================== WARNING ====================== This board does not use CONFIG_DM_MMC. Please update the board to use CONFIG_DM_MMC before the v2019.04 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info. ==================================================== Change the defconfig to disable MMC until a driver is submitted. Signed-off-by: NJoel Stanley <joel@jms.id.au>
-