- 05 2月, 2008 7 次提交
-
-
由 Wolfgang Denk 提交于
According to the OMAP5912 Serial Interfaces Reference Guide (see http://focus.ti.com/lit/ug/spru760c/spru760c.pdf, page 150), the FIFO_EN enable bit in the FIFO Control Register (FCR) can only be changed when the baud clock is not running, i. e. when both DLL and DLH are set to 0. Thus make sure that DLL and DLH are 0 when writing the FCR. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Harald Welte 提交于
This patch adds NAND support to the S3C24x0 SoC code in u-boot Signed-off-by: NHarald Welte <laforge@openmoko.org>
-
由 Harald Welte 提交于
This patch adds support for CONFIG_SERIAL_MULTI on s3c24x0 CPU's Signed-off-by: NHarald Welte <laforge@openmoko.org>
-
由 Harald Welte 提交于
This patch allows us to use the 'gd' pointer (and thus environment and everything else associated with it) from interrupt context on arm920t. Signed-off-by: NHarald Welte <laforge@openmoko.org>
-
由 Harald Welte 提交于
This patch adds a IRQ demultiplexer callback to the arm920 cpu core code, plus a stub implementation of it for the S3C2410. The purpose is to allow arm920t implementations such as the s3c24x0 to implement interrupt handlers in u-boot without having to touch core arm920t code. Signed-off-by: NHarald Welte <laforge@openmoko.org>
-
由 Hebbar 提交于
Add ifdef to bdinfo command to display ethernet information only if CONFIG_CMD_NET is defined for arm modules. Signed-off-by: NK R Gururaja Hebbar <gururajakr@sanyo.co.in>
-
由 Hebbar 提交于
Adds I2C init func call to init sequence for ARM boards. This is present in ppc,blackfin and other processor init sequence. Signed-off-by: NK R Gururaja Hebbar <gururajakr@sanyo.co.in>
-
- 04 2月, 2008 5 次提交
-
-
由 Ladislav Michl 提交于
Signed-off-by: NLadislav Michl <ladis@linux-mips.org>
-
由 Ladislav Michl 提交于
Signed-off-by: NLadislav Michl <ladis@linux-mips.org> Remove nowhere used struct bd_info_ext, remove trailing whitespaces, fix indentation.
-
由 Ladislav Michl 提交于
Somewhere during development of U-Boot-1.1.3 CONFIG_BOOTBINFUNC was renamed into CONFIG_INIT_CRITICAL which was 04 Apr 2005 replaced with CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT. However CONFIG_SKIP_LOWLEVEL_INIT has oposite meaning to CONFIG_BOOTBINFUNC, so fix configuration to reflect this fact. I'm sending this patch 4th (!) time in hope it produces at least some reaction. Signed-off-by: NLadislav Michl <ladis@linux-mips.org> Fix at91rm9200dk base and environment address.
-
由 stefano babic 提交于
MMC support for X_Scale PXA is broken and does not work. Mainly, the mmc_init() function cannot recognize current SD/MMC cards. There were already some patches around the world but none of them was merged into the official u-boot tree. This patch makes order fixing this issue. Resubmit after code cleanup. Applied and tested on PXA 270 (TrizepsIV module). Signed-off-by: NStefano Babic <sbabic@denx.de>
-
由 stefano babic 提交于
Fix gcc4 issue. With some toolchain, a previous patch that fixes gcc4 issues generates wrong code. (Problem was reported with gcc-4.0.2-glibc-2.3.6/arm-softfloat-linux-gnu). This patch fixes the problem and solves the gcc-4 issues as the linux kernel does. Signed-off-by: NStefano Babic <sbabic@denx.de> Signed-off-by: NDmitry Ivanov <ivadmitry@gmail.com>
-
- 25 1月, 2008 1 次提交
-
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 23 1月, 2008 15 次提交
-
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
-
-
由 Wolfgang Denk 提交于
-
-
由 Wolfgang Denk 提交于
-
-
由 Wolfgang Denk 提交于
-
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
-
-
-
-
-
- 19 1月, 2008 1 次提交
-
-
由 Dave Liu 提交于
The commit 04a9e118 cause the 83xx immap broken, so the DMA and PCI will be failed. The patch fix the struct spi8xxx and rm struct spi83xx. Signed-off-by: NDave Liu <daveliu@freescale.com> Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
- 18 1月, 2008 11 次提交
-
-
-
由 Haavard Skinnemoen 提交于
Add support for the ATNGW100 Network Gateway reference design, including flash, ethernet and MMC support. Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>
-
由 Haavard Skinnemoen 提交于
I don't know why the relevant layers can't do this by itself, but this is what ppc does. Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>
-
由 Michael Schwingen 提交于
Hi, The patch adds 4 boards, called AcTux-1 .. AcTux-4. This patch contains the files that contain changes for multiple boards, the board-specific files follow as separate patches. Signed-off-by: NMichael Schwingen <michael@schwingen.org>
-
由 Michael Schwingen 提交于
Signed-off-by: NMichael Schwingen <michael@schwingen.org>
-
由 Michael Schwingen 提交于
Signed-off-by: NMichael Schwingen <michael@schwingen.org>
-
由 Michael Schwingen 提交于
Signed-off-by: NMichael Schwingen <michael@schwingen.org>
-
由 Michael Schwingen 提交于
Signed-off-by: NMichael Schwingen <michael@schwingen.org>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Michael Schwingen 提交于
enables the RTS signal with CONFIG_SERIAL_RTS_ACTIVE. No handshaking is done, but the active RTS signal allows to connect to the target using a PC which is using RTS/CTS handshake, and does no harm if the PC is set to ignore RTS. Signed-off-by: NMichael Schwingen <michael@schwingen.org>
-
allow to load the microde from flash or ram by download it through the serial or other. Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: NStefan Roese <sr@denx.de>
-