- 14 7月, 2011 7 次提交
-
-
由 Stefano Babic 提交于
On i.MX27, the asm-offsets.h file is not yet generated as it should be. Signed-off-by: NStefano Babic <sbabic@denx.de> CC: Matthias Weisser <weisserm@arcor.de>
-
由 Stefano Babic 提交于
On i.MX5, the asm-offsets.h file is not yet generated as it should be. Signed-off-by: NStefano Babic <sbabic@denx.de> CC: Matthias Weisser <weisserm@arcor.de>
-
由 Matthias Weisser 提交于
Offsets to registers may be needed in asm code. This patch adds automated generation of these offsets form C structures. Signed-off-by: NMatthias Weisser <weisserm@arcor.de>
-
由 Matthias Weisser 提交于
imx25 used the wrong reset.c from imx27 Signed-off-by: NMatthias Weisser <weisserm@arcor.de>
-
由 Matthias Weisser 提交于
Need this function for autoboot keyd Signed-off-by: NMatthias Weisser <weisserm@arcor.de>
-
由 Fabio Estevam 提交于
mx27_uart_init_pins does the IOMUX setting for UART1 port. Change the function name to make the UART port number explicit. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
-
由 Matthias Weisser 提交于
asm-offsets.h should be auto generated. This patch adds two rules to rules.mk which makes this possible and removes the rules on imx35. Signed-off-by: NMatthias Weisser <weisserm@arcor.de> Acked-by: NStefano Babic <sbabic@denx.de>
-
- 04 7月, 2011 11 次提交
-
-
由 Andreas Bießmann 提交于
This is a copy of arm926ejs/at91 api for perpherial initialisation. At the moment we just need the usart part of the api. Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Andreas Bießmann 提交于
This patch enables the new clock features from arm920t/at91/clock.c. This is an required step to get at91rm9200_usart replaced by atmel_usart driver. Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com> Cc: Jens Scharsig <js_at_ng@scharsoft.de> Cc: Eric Bénard <eric@eukrea.com>
-
由 Andreas Bießmann 提交于
This patch adds an copy of arm926ejs/at91/clock.c to arm920t/at91. The arm926ejs specialities are removed from arm920t version and vice versa. Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Fabio Estevam 提交于
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
-
由 John Rigby 提交于
As implemented now the timer used to implement __udelay counts to 0xffffffff and then gets stuck there because the the programmed reload value is 0xffffffff. This value is not only wrong but illegal according to the reference manual. One can reproduce the bug by leaving a board at the u-boot prompt for sometime then issuing a sleep command. The sleep will hang forever. The timer is a count up timer that reloads as it rolls over from 0xffffffff so the correct load value is 0. Change TIMER_LOAD_VAL from 0xffffffff to 0 and introduce a new constant called TIMER_OVERFLOW_VAL set to 0xffffffff. Signed-off-by: NJohn Rigby <john.rigby@linaro.org> Tested-by: NIgor Grinberg <grinberg@compulab.co.il>
-
由 Aneesh V 提交于
adapt s5pc1xx to the new layered cache maintenance framework Signed-off-by: NAneesh V <aneesh@ti.com>
-
由 Aneesh V 提交于
adapt omap3 to the new layered cache maintenance framework Signed-off-by: NAneesh V <aneesh@ti.com>
-
由 Aneesh V 提交于
adapt omap4 to the new layered cache maintenance framework Signed-off-by: NAneesh V <aneesh@ti.com>
-
由 Aneesh V 提交于
- Enable I-cache on bootup - Enable MMU and D-cache immediately after relocation - Do necessary initialization before enabling d-cache and MMU - Changes to cleanup_before_linux() - Make changes according to the new framework Signed-off-by: NAneesh V <aneesh@ti.com>
-
由 Aneesh V 提交于
Replace the cache related CONFIG flags with more meaningful names. Following are the changes: CONFIG_L2_OFF -> CONFIG_SYS_L2CACHE_OFF CONFIG_SYS_NO_ICACHE -> CONFIG_SYS_ICACHE_OFF CONFIG_SYS_NO_DCACHE -> CONFIG_SYS_DCACHE_OFF Signed-off-by: NAneesh V <aneesh@ti.com> V2: * Changed CONFIG_L2_OFF -> CONFIG_SYS_NO_L2CACHE V4: * Changed all three flags to the final names suggested as above and accordingly changed the commit message
-
由 Aneesh V 提交于
- Add a framework for layered cache maintenance - separate out SOC specific outer cache maintenance from maintenance of caches known to CPU - Add generic ARMv7 cache maintenance operations that affect all caches known to ARMv7 CPUs. For instance in Cortex-A8 these opertions will affect both L1 and L2 caches. In Cortex-A9 these will affect only L1 cache - D-cache operations supported: - Invalidate entire D-cache - Invalidate D-cache range - Flush(clean & invalidate) entire D-cache - Flush D-cache range - I-cache operations supported: - Invalidate entire I-cache - Add maintenance functions for TLB, branch predictor array etc. - Enable -march=armv7-a so that armv7 assembly instructions can be used Signed-off-by: NAneesh V <aneesh@ti.com>
-
- 28 6月, 2011 1 次提交
-
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 23 6月, 2011 6 次提交
-
-
由 Michael Schwingen 提交于
Signed-off-by: NMichael Schwingen <michael@schwingen.org>
-
由 Michael Schwingen 提交于
Signed-off-by: NMichael Schwingen <michael@schwingen.org>
-
由 Michael Schwingen 提交于
Signed-off-by: NMichael Schwingen <michael@schwingen.org>
-
由 Michael Schwingen 提交于
- jump to real flash location after reset before turning off flash mirror - fix timer system to use HZ == 1000, remove broken interrupt-based code Signed-off-by: NMichael Schwingen <michael@schwingen.org>
-
由 Michael Schwingen 提交于
Signed-off-by: NMichael Schwingen <michael@schwingen.org>
-
由 Wolfgang Denk 提交于
The 'trab' board configuration is broken, and there is nobody who is interested and willing to fix it. Drop it. This includes support for VFD displays which have always been used by this board only. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 22 6月, 2011 2 次提交
-
-
由 Eric Benard 提交于
atmel rework changed define names which broke this file Signed-off-by: NEric Bénard <eric@eukrea.com>
-
由 Jens Scharsig 提交于
* convert at91rm9200ek and eb_cpux9k2 board to ATMEL_xxx name scheme * Fix: timer.c compile error io.h not found with arm/at91rm9200 * update arm920t/at91 to ATMEL_xxx name scheme * update arm920t/at91 soc lib * update at91_emac driver Signed-off-by: NJens Scharsig <js_at_ng@scharsoft.de> Tested-by: NAndreas Bießmann <andreas.devel@gmail.com>
-
- 03 6月, 2011 1 次提交
-
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 02 6月, 2011 1 次提交
-
-
由 John Rigby 提交于
Based on ST-Ericsson internal git repo. Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: NJohn Rigby <john.rigby@linaro.org> CC: Albert Aribaud <albert.aribaud@free.fr>
-
- 26 5月, 2011 4 次提交
-
-
由 Minkyu Kang 提交于
The source of pwm clock is fixed at evt1. And some registers for pwm clock are removed. Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Jaehoon Chung 提交于
This patch added set_mmc_clk for external clock control. c210 didn't support host clock control. So We need external_clock_control function for c210. Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
由 Minkyu Kang 提交于
S5PC210 SoC have two cpu revisions, and have some difference. So, support the cpu revision for each revision. Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
由 Chander Kashyap 提交于
SROM config code is made common for S5P series of boards. smdkc100.c now refers to s5p-common/sromc.c for SROM related subroutines. Signed-off-by: NChander Kashyap <chander.kashyap@linaro.org> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
- 23 5月, 2011 2 次提交
-
-
由 Stefano Babic 提交于
get_reset_cause() should not be exported. Drop code in the function after return statement that can generate warnings due to unreachable code. Signed-off-by: NStefano Babic <sbabic@denx.de> Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
-
由 Fabio Estevam 提交于
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
-
- 20 5月, 2011 1 次提交
-
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 18 5月, 2011 4 次提交
-
-
由 Daniel Gorsulowski 提交于
Signed-off-by: NDaniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
-
由 Jens Scharsig 提交于
* use start/end label for initialization tables instead of fix values Signed-off-by: NJens Scharsig <js_at_ng@scharsoft.de> Acked-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Reinhard Meyer 提交于
Signed-off-by: NReinhard Meyer <u-boot@emk-elektronik.de>
-
由 Reinhard Meyer 提交于
and remove the now unused asm/arch-at91/io.h Signed-off-by: NReinhard Meyer <u-boot@emk-elektronik.de>
-