- 13 5月, 2014 22 次提交
-
-
由 Ralph Siemsen 提交于
Trivial fix to .gitignore for spl/Makefile According to the gitignore man page: "An optional prefix "!" which negates the pattern; any matching file excluded by a previous pattern will become included again." ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ So the directory exclude "/spl/*" must come before the exception for spl/Makefile otherwise it has no effect. Signed-off-by: NRalph Siemsen <ralphs@netwinder.org> Tested-by: Masahiro Yamada <yamada.m@jp.panasonic.com> [on git v1.7.9.5 / v1.8.3.2]
-
由 Tom Rini 提交于
We say we have an XIP (in this case, image loaded at desired execution address) when the image header has been offset in the load. It's possible that in some cases executing the header is non-fatal but that's not true in many other cases. Signed-off-by: NTom Rini <trini@ti.com>
-
由 Marek Vasut 提交于
Add missing aes.c placeholder which includes lib/aes.c . Without this one, tools/env/ will fail to build. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Tested-by: NAlexey Brodkin <abrodkin@synopsys.com> Tested-by: NHeiko Schocher <hs@denx.de>
-
由 Masahiro Yamada 提交于
Commit 345b77ba removed some nand_spl boards but it missed to delete linker scripts. These linker scripts are not used now. And one more fix: amcc/acadia does not support nand_spl anymore, so remove #if !defined(CONFIG_NAND_U_BOOT) ... #endif Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Stefan Roese <sr@denx.de> Acked-by: NStefan Roese <sr@denx.de>
-
由 Masahiro Yamada 提交于
Some new boards define CONFIG_SYS_HZ again! Remove. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: NBo Shen <voice.shen@atmel.com>
-
由 Masahiro Yamada 提交于
CONFIG_BOARDDIR is not referenced in these linker scripts. The comment /* CONFIG_BOARDDIR */ is misleading. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Kristian Otnes 提交于
console_buffer array is defined to be CONFIG_SYS_CBSIZE + 1 long, whereas the_command array only CONFIG_SYS_CBSIZE long. Subsequent use of strcpy(the_command, console_buffer) will write final \0 terminating byte outside the_command array when entering a command of max length. Signed-off-by: Kristian Otnes <kotnes <at> cisco <dot> com>
-
由 Masahiro Yamada 提交于
Commit 33a02da0 supported "<none>" for the board field of boards.cfg. But it missed to modify spl/Makefile. This commit provides the flexibility so we can use "<none>" board in SPL too.
-
由 Manish Badarkhe 提交于
Make funtions static which are locally used in file. Signed-off-by: NManish Badarkhe <badarkhe.manish@gmail.com>
-
由 Fabio Estevam 提交于
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Andreas Bießmann 提交于
Commit 2842c1c2 introduced lib/sha256 into mkimage. Since then it will be compiled with HOSTCC which may produce errors on some systems. Most BSD systems (like OS X for me) do not ship a linux/string.h which will lead to take the U-Boot provided include/linux/string.h in the end. This header howver is completely wrong here. Just take the string.h if compiling with HOSTCC and linux/string.h when not. Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com> Cc: Heiko Schocher <hs@denx.de> Acked-by: Heiko Schocher<hs@denx.de>
-
由 Masahiro Yamada 提交于
Using __DATE__, __TIME__ would make the build non-deterministic. If the code needs to refer to build date/time, use U_BOOT_DATE and U_BOOT_TIME in include/generated/timestamp_autogenerated.h instead. This commit has been imported from Linux Kernel, which should be applied to U-Boot too: commit fe7c36c7bde12190341722af69358e42171162f3 Author: Josh Triplett <josh@joshtriplett.org> Date: Mon Dec 23 13:56:06 2013 -0800 Makefile: Build with -Werror=date-time if the compiler supports it GCC 4.9 and newer have a new warning -Wdate-time, which warns on any use of __DATE__, __TIME__, or __TIMESTAMP__, which would make the build non-deterministic. Now that the kernel does not use any of those macros, turn on -Werror=date-time if available, to keep it that way. The kernel already (optionally) records this information at build time in a single place; other kernel code should not duplicate that. Signed-off-by: NJosh Triplett <josh@joshtriplett.org> Signed-off-by: NMichal Marek <mmarek@suse.cz> Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
__DATE__ and __TIME__ makes the build non-deterministic. Drop the debug message using them. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
bfin_gen_rand_mac() uses __DATE__ as the seed for random ethernet address. This makes the build non-deterministic. In the first place, it should not be implemented as a Bfin-specific function. Use eth_random_addr() instead. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Sonic Zhang <sonic.zhang@analog.com>
-
由 Masahiro Yamada 提交于
Some functions in include/net.h are ported from include/linux/etherdevice.h of Linux Kernel. For ex. is_zero_ether_addr() is_multicast_ether_addr() is_broadcast_ether_addr() is_valid_ether_addr(); So, we should use the same function name as that of Linux Kernel, eth_rand_addr(), for consistency. Besides, eth_rand_addr() has been implemented as an inline function. So it should not be surrounded by #ifdef CONFIG_RANDOM_MACADDR. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
The command "time" shows the execution time of the command given to the argument, like this: time: 45.293 seconds, 45293 ticks Since we adopted CONFIG_SYS_HZ = 1000 for all boards, we always have a simple formula: "1 tick = 0.0001 second". Showing ticks looks almost redundant. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Shengzhou Liu 提交于
As some PHYs have non-standard PHY ID registers, PHY Id can't be read correctly by current get_phy_id function, so we enable get_phy_id redefinable to permit specific PHY driver having own specific get_phy_id function. Signed-off-by: NShengzhou Liu <Shengzhou.Liu@freescale.com>
-
由 Xiaobo Xie 提交于
Function "genphy_parse_link()" used "if (mii_reg & BMSR_ANEGCAPABLE)" before, but used "if (phydev->supported & SUPPORTED_Autoneg)" now. So assign "phydev->supported" to "phydev->drv->features" for ar8035 to enable autonegotiation. Then removed the genphy_config_aneg() function. Signed-off-by: NXie Xiaobo <X.Xie@freescale.com>
-
由 Karicheri, Muralidharan 提交于
keystone serial hw support hw flow control. This patch enables hw flow control for keystone EVMs as an optional feature based on CONFIG_SERIAL_HW_FLOW_CONTROL. Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com>
-
由 Nobuhiro Iwamatsu 提交于
Use of malloc of do_fat_write() causes cache error on ARM v7 platforms. Perhaps, the same problem will occur at any other CPUs. This replaces malloc with memalign to fix cache buffer alignment. Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NYoshiyuki Ito <yoshiyuki.ito.ub@renesas.com> Tested-by: NHector Palacios <hector.palacios@digi.com>
-
由 Masahiro Yamada 提交于
gd->bd->bi_baudrate is a copy of gd->baudrate. Since baudrate is a common feature for all architectures, keep gd->baudrate only. It is true that bi_baudrate was passed to the kernel in that structure but it was a long time ago. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Tom Rini <trini@ti.com> Cc: Simon Glass <sjg@chromium.org> Cc: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de> Acked-by: Michal Simek <monstr@monstr.eu> (For microblaze)
-
- 12 5月, 2014 1 次提交
-
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@ti.com>
-
- 10 5月, 2014 9 次提交
-
-
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Simon Glass <sjg@chromium.org> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Masahiro Yamada 提交于
Prior to commit 33a02da0, all boards must have board/${BOARD}/ or board/${VENDOR}/${BOARD}/ directory. Now this rule is obsolete. It looks weird that sandbox defines "vendor" and "board" just for meeting the old U-Boot directory structure. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Simon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Keep track of all Signed-off-by tags in a commit and silently suppress any duplicates. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This sort of failure is rare, but the code to deal with it is wrong. Fix it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Now that sandbox has a good base of features, the README is quite out of date. Update it, and document the new features. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Some machines do not have SDL libraries installed, and it is still useful to build sandbox without LCD/keyboard support. Add an option for this, used as follows: make sandbox_config all NO_SDL=1 Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
In the case where an environment variable spans multiple lines, we should use run_command_list() so that all lines are executed. This shold be backwards compatible with existing behaviour for existing scripts. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Adjust the code for these commands so that they work on sandbox. Signed-off-by: NSimon Glass <sjg@chromium.org> (Adjusted to fix minor merge comflict, when applied) Change-Id: I987dee6194cd5c83f82604caf894fc85e4eb71a8
-
- 09 5月, 2014 7 次提交
-
-
-
-
由 Albert ARIBAUD 提交于
Conflicts: drivers/net/Makefile (trivial merge)
-
由 Daniel Hellstrom 提交于
Without this patch SPARC/LEON does not build. Reported-by: NTom Rini <trini@ti.com> Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
-
由 Daniel Hellstrom 提交于
Before it was hardcoded to 1000 ticks per second. Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
-
由 Michal Simek 提交于
's/zynq_serial_initalize/zynq_serial_initialize/g' serial_initialize is used by all serial drivers. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Warnings: drivers/serial/serial_zynq.c:181:1: warning: symbol 'uart_zynq0_init' was not declared. Should it be static? drivers/serial/serial_zynq.c:181:1: warning: symbol 'uart_zynq0_setbrg' was not declared. Should it be static? drivers/serial/serial_zynq.c:181:1: warning: symbol 'uart_zynq0_getc' was not declared. Should it be static? drivers/serial/serial_zynq.c:181:1: warning: symbol 'uart_zynq0_tstc' was not declared. Should it be static? drivers/serial/serial_zynq.c:181:1: warning: symbol 'uart_zynq0_putc' was not declared. Should it be static? drivers/serial/serial_zynq.c:181:1: warning: symbol 'uart_zynq0_puts' was not declared. Should it be static? drivers/serial/serial_zynq.c:182:22: warning: symbol 'uart_zynq_serial0_device' was not declared. Should it be static? drivers/serial/serial_zynq.c:184:1: warning: symbol 'uart_zynq1_init' was not declared. Should it be static? drivers/serial/serial_zynq.c:184:1: warning: symbol 'uart_zynq1_setbrg' was not declared. Should it be static? drivers/serial/serial_zynq.c:184:1: warning: symbol 'uart_zynq1_getc' was not declared. Should it be static? drivers/serial/serial_zynq.c:184:1: warning: symbol 'uart_zynq1_tstc' was not declared. Should it be static? drivers/serial/serial_zynq.c:184:1: warning: symbol 'uart_zynq1_putc' was not declared. Should it be static? drivers/serial/serial_zynq.c:184:1: warning: symbol 'uart_zynq1_puts' was not declared. Should it be static? drivers/serial/serial_zynq.c:185:22: warning: symbol 'uart_zynq_serial1_device' was not declared. Should it be static? Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
- 08 5月, 2014 1 次提交
-
-
由 Jesper B. Christensen 提交于
Signed-off-by: NJesper B. Christensen <jesper.christensen@cobham.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-