Replace CONFIG_P1010 with ARCH_P1010 in Kconfig and clean up existing
macros.
Signed-off-by: NYork Sun <york.sun@nxp.com>

This macro is no longer used.
Signed-off-by: NYork Sun <york.sun@nxp.com>

Use CONFIG_TARGET_MPC8572DS instead.
Signed-off-by: NYork Sun <york.sun@nxp.com>

Replace CONFIG_MPC8572 with ARCH_MPC8572 in Kconfig and clean up existing
macros.
Signed-off-by: NYork Sun <york.sun@nxp.com>

Use CONFIG_TARGET_MPC8569MDS instead.
Signed-off-by: NYork Sun <york.sun@nxp.com>

Replace CONFIG_MPC8569 with ARCH_MPC8569 in Kconfig and clean up existing
macros.
Signed-off-by: NYork Sun <york.sun@nxp.com>

This macro is no longer used.
Signed-off-by: NYork Sun <york.sun@nxp.com>

Replace CONFIG_MPC8568 with ARCH_MPC8568 in Kconfig and clean up existing
macros.
Signed-off-by: NYork Sun <york.sun@nxp.com>

This macro is no longer used.
Signed-off-by: NYork Sun <york.sun@nxp.com>

Replace CONFIG_MPC8560 with ARCH_MPC8560 in Kconfig and clean up existing
macros.
Signed-off-by: NYork Sun <york.sun@nxp.com>

Use CONFIG_TARGET_MPC8555CDS instead.
Signed-off-by: NYork Sun <york.sun@nxp.com>

Replace CONFIG_MPC8555 with ARCH_MPC8555 in Kconfig and clean up existing
macros.
Signed-off-by: NYork Sun <york.sun@nxp.com>

Replace with CONFIG_TARGET_MPC8541CDS from Kconfig.
Signed-off-by: NYork Sun <york.sun@nxp.com>

Replace CONFIG_MPC8541 with ARCH_MPC8541 in Kconfig and clean up existing
macros.
Signed-off-by: NYork Sun <york.sun@nxp.com>

This macro is no longer used.
Signed-off-by: NYork Sun <york.sun@nxp.com>

Replace CONFIG_MPC8540 with ARCH_MPC8540 in Kconfig and clean up existing
macros.
Signed-off-by: NYork Sun <york.sun@nxp.com>

Use CONFIG_TARGET_MPC8536DS instead.
Signed-off-by: NYork Sun <york.sun@nxp.com>

Replace CONFIG_MPC8536 with ARCH_MPC8536 in Kconfig and clean up existing
macros.
Signed-off-by: NYork Sun <york.sun@nxp.com>

Use CONFIG_TARGET_C29XPCIE instead.
Signed-off-by: NYork Sun <york.sun@nxp.com>

Replace CONFIG_PPC_C29X with ARCH_C29X in Kconfig and clean up existing
macros.
Signed-off-by: NYork Sun <york.sun@nxp.com>

Use CONFIG_TARGET_BSC9132QDS from Kconfig option, remove CONFIG_BSC9132QDS
macro.
Signed-off-by: NYork Sun <york.sun@nxp.com>

This macro CONFIG_BSC9131RDB is no longer needed.
Signed-off-by: NYork Sun <york.sun@nxp.com>

Replace CONFIG_BSC9131, CONFIG_BSC9132 with ARCH_BSC9131, ARCH_BSC9132
Kconfig options.

Also drop #ifdef in BSC9131RDB.h since it is redundant.
Signed-off-by: NYork Sun <york.sun@nxp.com>

Use CONFIG_TARGET_MPC8544DS instead.
Signed-off-by: NYork Sun <york.sun@nxp.com>

Replace CONFIG_MPC8544 with ARCH_MPC8544 in Kconfig.
Signed-off-by: NYork Sun <york.sun@nxp.com>

Use CONFIG_TARGET_MPC8548CDS instead.
Signed-off-by: NYork Sun <york.sun@nxp.com>

Replace CONFIG_MPC8548 with ARCH_MPC8548 in Kconfig.
Signed-off-by: NYork Sun <york.sun@nxp.com>

While we move some config macros to Kconfig, kconfig header is needed
to avoid compiling error if not already included.
Signed-off-by: NYork Sun <york.sun@nxp.com>

This option isn't used for anything, so get rid of it.
Signed-off-by: NSam Protsenko <semen.protsenko@linaro.org>

Signed-off-by: NSam Protsenko <semen.protsenko@linaro.org>
[trini: Fix sniper and kc1 migration]
Signed-off-by: NTom Rini <trini@konsulko.com>

Patch queue for efi - 2016-11-17

Highlights this time around:

  - x86 efi_loader support
  - hello world efi test case
  - network device name is now representative
  - terminal output reports modes correctly
  - fix psci reset for ls1043/ls1046
  - fix efi_add_runtime_mmio definition for x86
  - efi_loader support for ls2080

Most new systems in U-Boot these days make use of the generic "distro"
framework which allows a user to have U-Boot scan for a bootable OS
on all available media types.

This patch extends the LS2080ARDB board to use that framework if the
hard coded NOR flash location does not contain a bootable image.
Signed-off-by: NAlexander Graf <agraf@suse.de>

When implementing efi loader support, we can expose runtime services
for payloads. One such service is CPU reset.

This patch implements RTS CPU reset support for layerscape systems.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NYork Sun <york.sun@nxp.com>

The efi loader code has its own memory map, so it needs to be aware where
the spin tables are located, to ensure that no code writes into those
regions.
Signed-off-by: NAlexander Graf <agraf@suse.de>

The DP-DDR shouldn't be exposed as conventional memory to an OS, so let's
rather claim it's a reserved region in the EFI memory map
Signed-off-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NYork Sun <york.sun@nxp.com>

On ls2080 we have a separate network fabric component which we need to
shut down before we enter Linux (or any other OS). Along with that also
comes configuration of the fabric using a description file.

Today we always stop and configure the fabric in the boot script and
(again) exit it on device tree generation. This works ok for the normal
booti case, but with bootefi the payload we're running may still want to
access the network.

So let's add a new fsl_mc command that defers configuration and stopping
the hardware to when we actually exit U-Boot, so that we can still use
the fabric from an EFI payload.

For existing boot scripts, nothing should change with this patch.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NYork Sun <york.sun@nxp.com>
[agraf: Fix x86 build]

The efi_add_runtime_mmio prototype for disabled CONFIG_EFI_LOADER
was different from the enabled one. Sync them.
Signed-off-by: NAlexander Graf <agraf@suse.de>

The NXP ls1043 and ls1046 systems do not (yet) have PSCI enablement
for reset. Don't enable generic PSCI reset code on them.
Signed-off-by: NAlexander Graf <agraf@suse.de>

Some boards decided not to run ATF or other secure firmware in EL3, so
they instead run U-Boot there. The uEFI spec doesn't know what EL3 is
though - it only knows about EL2 and EL1. So if we see that we're running
in EL3, let's get into EL2 to make payloads happy.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NYork Sun <york.sun@nxp.com>