- 12 1月, 2017 19 次提交
-
-
由 Romain Perier 提交于
This enables suitable commands needed for booting general purpose Linux distribution. This is required for example if we want to use PXE or DHCP as default boot targets, symbols no longer enabled by config_distro_defaults.h . Signed-off-by: NRomain Perier <romain.perier@collabora.com>
-
由 Simon Glass 提交于
This is the only RK3399 device without DHCP. Enable it so that we can use a common BOOT_TARGET_DEVICES setting. It is likely useful to be able to use USB networking, at least. Full networking can be enabled when a suitable platform needs it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Sjoerd Simons 提交于
Enable the various configuration option required to get the ethernet interface up and running on Radxa Rock2 and Firefly. Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: NRomain Perier <romain.perier@collabora.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Sjoerd Simons 提交于
Add a new driver for the GMAC ethernet interface present in Rockchip RK3288 SOCs. This driver subclasses the generic design-ware driver to add the glue needed specifically for Rockchip. Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NRomain Perier <romain.perier@collabora.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Simon Glass 提交于
Export all functions so that drivers can use them, or not, as the need arises. Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NRomain Perier <romain.perier@collabora.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Simon Glass 提交于
With rockchip we need to make adjustments after the link speed is set but before enabling received/transmit. In preparation for this, split these two pieces into separate functions. Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NRomain Perier <romain.perier@collabora.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Simon Glass 提交于
This function can fail, so return the error if there is one. Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NRomain Perier <romain.perier@collabora.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Sjoerd Simons 提交于
To allow other DM drivers to subclass the designware driver various functions and structures need to be exported. Export these. Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: NRomain Perier <romain.perier@collabora.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Nickey Yang Nickey Yang 提交于
Correct mpixelclock errors in rockchip_phy_config[] and rockchip_mpll_cfg[]. Signed-off-by: NNickey Yang <nickey.yang@rock-chips.com>
-
由 Nickey Yang Nickey Yang 提交于
Isp-camera preview image will be broken when dual screen display mode. This patch set isp/vop qos level higher to solve this problem. We have verified this patch on rk3288-miniarm board. Signed-off-by: NNickey Yang <nickey.yang@rock-chips.com>
-
由 Kever Yang 提交于
rk3399 has two clock-controller: cru and pmucru, update the rockchip_get_crui() API, and rockchip_get_clk() do not used for other module. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
Add 'max-frequency' for sdhci node for clock init. Signed-off-by: NKever Yang <kever.yang@rock-chips.com> Reviewed-by: NJaehoon Chung <jh80.chung@samsung.com>
-
由 Kever Yang 提交于
Init the clock rate to max-frequency from dts with clock driver api. Signed-off-by: NKever Yang <kever.yang@rock-chips.com> Reviewed-by: NJaehoon Chung <jh80.chung@samsung.com>
-
由 Martin Michlmayr 提交于
The veyron-minnie Kconfig referred to jerry by mistake. Signed-off-by: NMartin Michlmayr <tbm@cyrius.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Jacob Chen 提交于
To make rockchip soc keep the same partition map Signed-off-by: NJacob Chen <jacob2.chen@rock-chips.com>
-
由 Jacob Chen 提交于
With CONFIG_ROCKCHIP_SPL_BACK_TO_BROM enabled, the environment is inside u-boot. So solve it by moving environment after u-boot. Signed-off-by: NJacob Chen <jacob2.chen@rock-chips.com>
-
由 Kever Yang 提交于
The popmetal board using a HOST_VBUS_DRV gpio signal to control the USB host port 5V power, add a fix regulator and pinctrl for it, and enable the USB host1 controller with the vbus-supply. Signed-off-by: NKever Yang <kever.yang@rock-chips.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Added rockchip: tag: Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Kever Yang 提交于
RK3288 using the dwc2 USB host controller, enable it and other usb host funtion like storage and ether. Signed-off-by: NKever Yang <kever.yang@rock-chips.com> Acked-by: NSimon Glass <sjg@chromium.org> Added rockchip: tag: Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Kever Yang 提交于
The PopMetal board have a on board FE1.1 usb 2.0 hub which connect to the usb host port, we need to de-assert its reset pin to enable it. Signed-off-by: NKever Yang <kever.yang@rock-chips.com> Acked-by: NSimon Glass <sjg@chromium.org> Added rockchip: tag: Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 11 1月, 2017 21 次提交
-
-
由 Tom Rini 提交于
With entry_point now being an unsigned long we need to adapt the last two debug prints to use %lX not %X. Fixes: 11e1479b ("SPL: make struct spl_image 64-bit safe") Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
The variable ret was added but never set as we did not make calls to other functions that we needed to check the return value on. Fixes: 505cf475 ("power: change from meaningless value to error number") Signed-off-by: NTom Rini <trini@konsulko.com>
-
git://www.denx.de/git/u-boot-microblaze由 Tom Rini 提交于
Xilinx changes for v2017.03 - ATF handoff - DT syncups - gem: Use wait_for_bit(), add simple clk support - Simple clk driver for ZynqMP - Other small changes
-
由 Masahiro Yamada 提交于
The bare default entry is wrong. Just remove it since the (real) entry in drivers/mmc/Kconfig has "default ARM || PPC || SANDBOX". Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NMarek Vasut <marex@denx.de>
-
由 Masahiro Yamada 提交于
Move (and rename) the following CONFIG options to Kconfig: CONFIG_DAVINCI_MMC (renamed to CONFIG_MMC_DAVINCI) CONFIG_OMAP_HSMMC (renamed to CONFIG_MMC_OMAP_HS) CONFIG_MXC_MMC (renamed to CONFIG_MMC_MXC) CONFIG_MXS_MMC (renamed to CONFIG_MMC_MXS) CONFIG_TEGRA_MMC (renamed to CONFIG_MMC_SDHCI_TEGRA) CONFIG_SUNXI_MMC (renamed to CONFIG_MMC_SUNXI) They are the same option names as used in Linux. This commit was created as follows: [1] Rename the options with the following command: find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \ -type f -print | xargs sed -i -e ' s/CONFIG_DAVINCI_MMC/CONFIG_MMC_DAVINCI/g s/CONFIG_OMAP_HSMMC/CONFIG_MMC_OMAP_HS/g s/CONFIG_MXC_MMC/CONFIG_MMC_MXC/g s/CONFIG_MXS_MMC/CONFIG_MMC_MXS/g s/CONFIG_TEGRA_MMC/CONFIG_MMC_SDHCI_TEGRA/g s/CONFIG_SUNXI_MMC/CONFIG_MMC_SUNXI/g ' [2] Commit the changes [3] Create entries in driver/mmc/Kconfig. (copied from Linux) [4] Move the options with the following command tools/moveconfig.py -y -r HEAD \ MMC_DAVINCI MMC_OMAP_HS MMC_MXC MMC_MXS MMC_SDHCI_TEGRA MMC_SUNXI [5] Sort and align drivers/mmc/Makefile for readability Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NMarek Vasut <marex@denx.de>
-
由 Masahiro Yamada 提交于
This CONFIG is not referenced from anywhere. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NMarek Vasut <marex@denx.de>
-
由 Masahiro Yamada 提交于
Move (and rename) the following CONFIG options to Kconfig: CONFIG_EXYNOS_DWMMC (renamed to CONFIG_MMC_DW_EXYNOS) CONFIG_HIKEY_DWMMC (renamed to CONFIG_MMC_DW_K3) CONFIG_SOCFPGA_DWMMC (renamed to CONFIG_MMC_DW_SOCFPGA) The "HIKEY" is a board name, so it is not suitable for the MMC controller name. I am following the name used in Linux. This commit was generated as follows: [1] Rename the config options with the following command: find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \ -type f -print | xargs sed -i -e ' s/CONFIG_EXYNOS_DWMMC/CONFIG_MMC_DW_EXYNOS/g s/CONFIG_HIKEY_DWMMC/CONFIG_MMC_DW_K3/g s/CONFIG_SOCFPGA_DWMMC/CONFIG_MMC_DW_SOCFPGA/g ' [2] Commit the changes [3] Create the entries in drivers/mmc/Kconfig (with default y for EXYNOS and SOCFPGA) [4] Run the following: tools/moveconfig.py -y -r HEAD MMC_DW_EXYNOS MMC_DW_K3 MMC_DW_SOCFPGA [5] Sort and align drivers/mmc/Makefile for readability [6] Clean-up doc/README.socfpga by hand Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NMarek Vasut <marex@denx.de>
-
由 Masahiro Yamada 提交于
This commit was created as follows: [1] Rename the option with the following command: find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \ -type f -print | xargs sed -i -e 's/CONFIG_DWMMC/CONFIG_MMC_DW/g' [2] create the entry for MMC_DW in drivers/mmc/Kconfig (the prompt and help were copied from Linux) [3] run "tools/moveconfig.py -y MMC_DW" [4] add "depends on MMC_DW" to the MMC_DW_ROCKCHIP entry [5] Clean-up doc/README.socfpga by hand Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NMarek Vasut <marex@denx.de>
-
由 Masahiro Yamada 提交于
I am trying to make all DesignWare-based driver options prefixed with CONFIG_MMC_DW_. This commit was generated as follows: find . -name .git -prune -o -type f -print | \ xargs sed -i -e 's/ROCKCHIP_DWMMC/MMC_DW_ROCKCHIP/g' Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NMarek Vasut <marex@denx.de>
-
由 Masahiro Yamada 提交于
CONFIG_SOCFPGA_DWMMC_FIFO_DEPTH is defined in the socfpga_common.h, but not referenced at all. Remove. Also, clean-up the README.socfpga. CONFIG_MMC should not be defined in the header since it was moved to Kconfig by commit c2726995 ("mmc: complete unfinished move of CONFIG_MMC"). I see no grep hit for the others. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NMarek Vasut <marex@denx.de>
-
由 Jaehoon Chung 提交于
'-1' is absolutely meaningless value. This patch changed from meaningless value to error number. Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Masahiro Yamada 提交于
Some MMC drivers describe operations with the DM_MMC_OPS form, but there are still several drivers with older implementation. We can not compile drivers from different groups at the same time because the core framework is shared with #ifdef CONFIG_DM_MMC_OPS. Every driver should have "depends on DM_MMC_OPS" (or !DM_MMC_OPS) explicitly to express which framework it is based on. This will avoid enabling drivers with incompatible interface at the same time. It is incorrect to make a driver "select DM_MMC_OPS". While we are here, add "depends on OF_CONTROL" as well because this driver can be configured only by Device Tree. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
Add a driver for the Cadence SD4HC SD/SDIO/eMMC Controller. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Jaehoon Chung 提交于
It doesn't need to seperate the condition. Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com>
-
由 Jaehoon Chung 提交于
Ther is no usage anywhere. It doesn't need to maintain this bit. Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com>
-
由 Jaehoon Chung 提交于
The using the bitops is too easy controlling than now. Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com>
-
由 Jaehoon Chung 提交于
callback function should be moved into sdhci_ops struct. Other controller can use these ops for controlling clock or their own specific register. Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com>
-
由 Jaehoon Chung 提交于
Add the s5p_set_clock function. It's not good that "set_mmc_clk" is assigned directly. In future, it should be changed to use the clock framework. Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com>
-
由 Jaehoon Chung 提交于
To maintain consistency, set_ios type of legacy mmc_ops changed to int. Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com>
-
由 Jaehoon Chung 提交于
This quirk doesn't need anymore. It's replaced to get_cd callback function. Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com>
-
由 Jaehoon Chung 提交于
This code is used for only pic32_sdhci controller. To remove the "#ifdef", moves to pic32_sdhci.c. And use the get_cd callback function. Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com>
-