Conflicts:
	tools/Makefile

This change allow to use sd card on Goni the same like mmc 0.
SD card is mmc dev 1, so it can be used like this: "fatls mmc 1:2".
SD card is inited even if eMMC initialization fails.
Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
CC: Minkyu Kang <mk7.kang@samsung.com>
Acked-by: NJaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

On s5pc1xx mmc devices offset is multiply of 0x100000,
wrong value was 0x10000. Register offset always points
to mmc 0 before this change.

Add macro definition of mmc dev register offset to s5pc1xx and
exynos mmc.
Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
CC: Minkyu Kang <mk7.kang@samsung.com>
Acked-by: Jaehoon Chung <jh80.chung at samsung.com>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

As per new convention ARCH_CPU_DTS is not defined in "dtc/Makefile".
Hence Arndale comilation is failing. Fix this by adding proper include
file in "board/samsung/dts/exynos5250-arndale.dts".
Signed-off-by: NChander Kashyap <chander.kashyap@linaro.org>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

The source clock frequency of I2C bus on p1022 is the platform(CCB)
clock, not CCB/2. The wrong source clock frequency leads to wrong
I2C bus speed setting. so, fixed it.
Signed-off-by: NTang Yuantian <Yuantian.Tang@freescale.com>

- Added section "u_boot_list" in arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
- Use the function i2c_init_all instead of i2c_init
Signed-off-by: NYing Zhang <b40530@freescale.com>

LCD4 needs a slightly different GPIO configuration than the
original LWMON5 variant. GPIO49 needs to be configured to a
default output value of 0 (permanent voltage supply).

Additionally lcd4 also needs to enable the LSB transmitter.
Signed-off-by: NStefan Roese <sr@denx.de>

For most boards which define CONFIG_SPL_PAD_TO,
it is defined in config header files.
Currently, there exists only one exception, cam_enc_4xx board.

This patch moves CONFIG_SPL_PAD_TO definition
from board/ait/cam_enc_4xx/config.mk
to include/configs/cam_enc_4xx.h.

With this modification, we can delete a glue code
in the top level config.mk:

ifneq ($(CONFIG_SPL_PAD_TO),)
CPPFLAGS += -DCONFIG_SPL_PAD_TO=$(CONFIG_SPL_PAD_TO)
endif
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Heiko Schocher <hs@denx.de>

Currently no makefiles (board-specific config.mk)
set the following variables:

CONFIG_SPL_TEXT_BASE
CONFIG_UBOOT_PAD_TO
CONFIG_RESET_VECTOR_ADDRESS
CONFIG_TPL_PAD_TO

For all target boards using above macros
they are set in header files (include/configs/*.h),
so we do not need to set them as CPPFLAGS.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>

Signed-off-by: NOliver Metz <oliver@freetz.org>
Tested-by: NLuka Perkov <luka@openwrt.org>

Signed-off-by: NOliver Metz <oliver@freetz.org>
Tested-by: NLuka Perkov <luka@openwrt.org>

Fix my email address.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Tom Rini <trini@ti.com>

Use of uImage formatted u-boot have long been preferred, and recent
changes to better support Falcon mode on MMC now enforces it on MMC.
Signed-off-by: NHenrik Nordstrom <henrik@henriknordstrom.net>

libata already has similar functions as implemented in the ahci code.
Refactor the code to use the libata variants and remove the dependency on
ata.h. Convert some defines to use the version from libata.h. Also, remove
some unnecessary memset's of bss data.

This is a step toward hopefully merging ahci.c and dw_ahsata.c which are
essentially the same driver.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Reviewed-by: NTom Rini <trini@ti.com>

Based on Linux libata code, most drives are less than 10 sec, but some
need up to 20 sec.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Reviewed-by: NTom Rini <trini@ti.com>

Some Intel SSDs can send a COMINIT after the initial COMRESET. This causes
the link to go down and we need to re-initialize the link.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>

Move the link bring-up handling to a separate weak function in order to
allow platforms to override it. This is needed on highbank platform which
needs special phy handling.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>

Replace hard-coded register values with proper defines for PORT_SCR_STAT
register.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>

This fixes a memory leak when scsi inquiry fails.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Reviewed-by: NTom Rini <trini@ti.com>

gcc 4.7 will generate unaligned accesses to local char arrays, so make
them static to avoid that.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Reviewed-by: NTom Rini <trini@ti.com>

The AHCI driver was incorrectly using the Capabilities register NP (number
of ports) field to determine which ports to activate. This commit changes
it to correctly use the PORTS_IMPL register as a port map.
Signed-off-by: NRichard Gibbs <richard.gibbs@calxeda.com>
Reviewed-by: NTom Rini <trini@ti.com>

Add support for defining the gcc lib in standalone examples as is
done in the main u-boot Makefile
Signed-off-by: NJack Mitchell <jack.mitchell@dbbroadcast.co.uk>

In the set_cluster() function, it will convert the buffer size to sector
numbers. Then call disk_write() to write by sector.
For remaining buffer, the size is less than a sector, call disk_write()
again to write them in one sector.

But if the total buffer size is less then one sector, the original code
will call disk_write() with zero sector number. It is unnecessary.
So this patch fix this. Now it will not call disk_write() if total buffer size
is less than one sector.
Signed-off-by: NJosh Wu <josh.wu@atmel.com>

gcc allows extensions to be non compiler specific by defining
__* macros for the attributes supported by gcc. Having a
different definition causes many warnings during the build
(cdefs.h on FreeBSD uses __attribute((__pure__)) where u-boot
uses __attribute__((pure)) for example). Do not redefine
these macros to suppress these warnings.

This patch ignores the checkpatch warning:
WARNING: __packed is preferred over __attribute__((packed))
Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>

Update git-mailrc with my nick and replace afleming as mmc custodian.
Signed-off-by: NPantelis Antoniou <panto@antoniou-consulting.com>

Somewhere along the line of refactoring the am335x header files, the
kernel image load was lost, so put it back in.
Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>

Consolidating reset code into reset_manager.c. Also
separating reset configuration for virtual target and
real hardware Cyclone V development kit
Signed-off-by: NChin Liang See <clsee@altera.com>
Reviewed-by: NPavel Machek <pavel@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Pavel Machek <pavel@denx.de>
Cc: Dinh Nguyen <dinguyen@altera.com>
Cc: Tom Rini <trini@ti.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>

Separating the configuration file for Virtual
Target and real hardware Cyclone V development kit
Signed-off-by: NChin Liang See <clsee@altera.com>
Reviewed-by: NPavel Machek <pavel@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Pavel Machek <pavel@denx.de>
Cc: Dinh Nguyen <dinguyen@altera.com>
Cc: Tom Rini <trini@ti.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>

The commit 1a459660
  Add GPL-2.0+ SPDX-License-Identifier to source files

generated a warning due to a missing comment terminator.
  longlong.h:7:1: warning: "/*" within comment
Signed-off-by: NThomas Chou <thomas@wytron.com.tw>

Remove ARM eabi exception handling tables (for frame unwinding).
AFAICT, u-boot stubs away the frame unwiding routines, so the tables will
more or less just consume space. It should be OK to remove them.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Conflicts:
	drivers/serial/serial.c

The conflict above was a trivial case of adding one init
function in each branch, and manually resolved in merge.

Drop unused CONFIG_NET_MULTI
Signed-off-by: NBo Shen <voice.shen@gmail.com>
Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>

The PMECC use BCH algorithm to correct error. In BCH algorithm, the
primitive polynomial value is GF(2^13) for 512-bytes sector size. And it is
GF(2^14) for 1024-bytes sector size.

This patch will choose correct degree of the remainders (13 or 14) for
different sector size.
Tested in AT91SAM9X5-EK with MLC nand flash.

More detail can be refered to section 5.4.1 of:
  AT91SAM ARM-based Embedded MPU Application Note
  <http://www.atmel.com/Images/doc11127.pdf>
Signed-off-by: NJosh Wu <josh.wu@atmel.com>
Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>