- 19 11月, 2009 1 次提交
-
-
由 Stefan Roese 提交于
The latest changes in the u-boot/next branch increased the size of the alpr image a bit more. Now it doesn't fit into the 256k reserved for it. This patch now removes the commands "askenv" and "irq" which are not needed in the production systems. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Pieter Voorthuijsen <pieter.voorthuijsen@prodrive.nl>
-
- 24 1月, 2009 1 次提交
-
-
由 Wolfgang Grandegger 提交于
This patch renames NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS and changes the default from 8 to 1 for the legacy and the new MTD NAND layer. This allows to remove all NAND_MAX_CHIPS definitions in the board config files because none of the boards use multi chip support (NAND_MAX_CHIPS > 1) so far. The bamboo and the DU440 define #define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE but that's bogus and did not work anyhow. Signed-off-by: NWolfgang Grandegger <wg@grandegger.com> Signed-off-by: NScott Wood <scottwood@freescale.com>
-
- 10 12月, 2008 1 次提交
-
-
由 Stefan Roese 提交于
Signed-off-by: NStefan Roese <sr@denx.de>
-
- 10 11月, 2008 1 次提交
-
-
由 Ben Warren 提交于
All in-tree IBM/AMCC PPC4xx boards using the EMAC get this new CONFIG Signed-off-by: NBen Warren <biggerbadderben@gmail.com> Acked-by: NStefan Roese <sr@denx.de>
-
- 19 10月, 2008 1 次提交
-
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
- 14 10月, 2008 1 次提交
-
-
由 Peter Tyser 提交于
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>
-
- 11 9月, 2008 2 次提交
-
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
- 13 8月, 2008 1 次提交
-
-
rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
- 04 6月, 2008 1 次提交
-
-
由 Stefan Roese 提交于
This patch removes the used testdram() implementations of the board that are maintained by myself. Signed-off-by: NStefan Roese <sr@denx.de>
-
- 27 3月, 2008 2 次提交
-
-
由 Stefan Roese 提交于
Since this board will probably be ported to arch/powerpc in the near future, we add device tree support now. This way we are "ready" for arch/powerpc from now on. Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Pieter Voorthuijsen 提交于
Signed-off-by: NPieter Voorthuijsen <pv@prodrive.nl>
-
- 07 3月, 2008 1 次提交
-
-
由 Detlev Zundel 提交于
The latter version stops when "run load" fails for whatever reasons rendering the combination *a lot* more secure. Signed-off-by: NDetlev Zundel <dzu@denx.de>
-
- 09 1月, 2008 1 次提交
-
-
由 Matthias Fuchs 提交于
This patch removes the FPGA subsystem configuration through the CONFIG_FPGA bitmask configuration option. See README for the new options: CONFIG_FPGA, CONFIG_FPGA_<vendor>, CONFIG_FPGA_<family> Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd-electronics.com>
-
- 01 11月, 2007 1 次提交
-
-
由 Stefan Roese 提交于
All 4xx board config files don't need the cache definitions anymore. These are now defined in common headers. Signed-off-by: NStefan Roese <sr@denx.de>
-
- 10 7月, 2007 1 次提交
-
-
由 Jon Loeliger 提交于
Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h used to be included but CONFIG_BOOTP_MASK was not defined. Remove lingering references to CFG_CMD_* symbols. Signed-off-by: NJon Loeliger <jdl@freescale.com>
-
- 05 7月, 2007 1 次提交
-
-
由 Jon Loeliger 提交于
Signed-off-by: NJon Loeliger <jdl@freescale.com>
-
- 25 6月, 2007 1 次提交
-
-
由 Stefan Roese 提交于
This patch removes the CFG_PCI_PRE_INIT option completely, since it's not needed anymore with the patch from Matthias Fuchs with the "weak" pci_pre_init() implementation. Signed-off-by: NStefan Roese <sr@denx.de>
-
- 23 6月, 2007 1 次提交
-
-
由 Wolfgang Denk 提交于
-
- 15 6月, 2007 1 次提交
-
-
由 Grzegorz Bernacki 提交于
- Introduced dedicated switches for building 440 and 405 images required for 440-specific machine instructions like 'rfmci' etc. - Exception vectors moved to the proper location (_start moved away from the critical exception handler space, which it occupied) - CriticalInput now serviced (with default handler) - MachineCheck properly serviced (added a dedicated handler and return subroutine) - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused, unhandled and those not relevant for 4xx were eliminated) - Eliminated Linux leftovers, removed dead code Signed-off-by: NGrzegorz Bernacki <gjb@semihalf.com> Signed-off-by: NRafal Jaworowski <raj@semihalf.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
- 30 1月, 2007 1 次提交
-
-
由 Stefan Roese 提交于
Signed-off-by: NStefan Roese <sr@denx.de>
-
- 06 1月, 2007 1 次提交
-
-
由 Stefan Roese 提交于
This update brings the ALPR board support to the newest version. It also fixes a problem with the NAND driver. Signed-off-by: NStefan Roese <sr@denx.de>
-
- 27 11月, 2006 2 次提交
-
-
由 Stefan Roese 提交于
Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
Signed-off-by: NStefan Roese <sr@denx.de>
-
- 07 10月, 2006 1 次提交
-
-
由 Stefan Roese 提交于
Patch by Stefan Roese, 07 Oct 2006
-
- 15 8月, 2006 1 次提交
-
-
由 Stefan Roese 提交于
NAND needs some additional testing Patch by Heiko Schocher, 15 Aug 2006
-
- 07 8月, 2006 1 次提交
-
-
由 Stefan Roese 提交于
Patch by Stefan Roese, 07 Aug 2006
-
- 21 11月, 2005 1 次提交
-
-
由 Wolfgang Denk 提交于
which makes the environment compatible with the hush shell. WARNING: Support for the old '$(...)' syntax will be discontinued in a later version.
-
- 20 10月, 2005 1 次提交
-
-
由 Stefan Roese 提交于
Patch by Stefan Roese, 20 Oct 2005
-
- 23 9月, 2005 1 次提交
-
-
由 Wolfgang Denk 提交于
-
- 17 8月, 2005 1 次提交
-
-
由 Stefan Roese 提交于
now handling all 4xx cpu's. Patch by Stefan Roese, 16 Aug 2005
-
- 08 8月, 2005 1 次提交
-
-
由 Stefan Roese 提交于
Patch by Stefan Roese, 08 Aug 2005
-
- 01 8月, 2005 1 次提交
-
-
由 Stefan Roese 提交于
Patch by Stefan Roese, 01 Aug 2005
-
- 07 4月, 2005 1 次提交
-
-
由 stroese 提交于
Updates for OCOTEA board: - Changed U-Boot size from 512kByte to 256kByte - Fixed flash driver to support boot from soldered user flash - Added README for switch from PIBS firmware to U-Boot
-
- 03 4月, 2005 1 次提交
-
-
由 wdenk 提交于
enable SNTP support in some boards.
-
- 31 12月, 2004 1 次提交
-
-
由 wdenk 提交于
* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for additional ethernet addresses. * Cleanup drivers/i82365.c - avoid duplication of code * Fix bogus "cannot span across banks" flash error message * Add support for CompactFlash for the CPC45 Board.
-
- 30 5月, 2004 1 次提交
-
-
由 wdenk 提交于
Sort Makefile. Update docs.
-
- 24 3月, 2004 1 次提交
-
-
由 wdenk 提交于
Increase speed of sector reads from SystemACE, shorten poll timeout and remove a useless reset * Patch by Tolunay Orkun, 19 Mar 2004: Make GigE PHY 1000Mbps Speed/Duplex detection conditional (CONFIG_PHY_GIGE) * Patch by Brad Kemp, 18 Mar 2004: prevent machine checks during a PCI scan * Patch by Pierre Aubert, 18 Mar 2004: Fix string cleaning in IDE identification
-
- 15 3月, 2004 1 次提交
-
-
由 wdenk 提交于
-
- 14 3月, 2004 1 次提交
-
-
由 wdenk 提交于
Ocotea: - Add IBM PPC440GX Ref Platform support (Ocotea) Original code by Paul Reynolds <PaulReynolds@lhsolutions.com> Adapted to U-Boot and 440GX port 440gx_enet.c: - Add gracious handling of all Ethernet Pin Selections for 440GX - Add RGMII selection for Cicada CIS8201 Gigabit PHY ppc440.h: - Add needed bit definitions - Fix formatting * Patch by Carl Riechers, 1 Mar 2004: Add PPC440GX prbdv0 divider to fix memory clock calculation. * Patch by Stephan Linz, 27 Feb 2004 - avoid problems for targets without NFS download support
-