This fixes a memory leak when scsi inquiry fails.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Reviewed-by: NTom Rini <trini@ti.com>

gcc 4.7 will generate unaligned accesses to local char arrays, so make
them static to avoid that.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Reviewed-by: NTom Rini <trini@ti.com>

The AHCI driver was incorrectly using the Capabilities register NP (number
of ports) field to determine which ports to activate. This commit changes
it to correctly use the PORTS_IMPL register as a port map.
Signed-off-by: NRichard Gibbs <richard.gibbs@calxeda.com>
Reviewed-by: NTom Rini <trini@ti.com>

Add support for defining the gcc lib in standalone examples as is
done in the main u-boot Makefile
Signed-off-by: NJack Mitchell <jack.mitchell@dbbroadcast.co.uk>

In the set_cluster() function, it will convert the buffer size to sector
numbers. Then call disk_write() to write by sector.
For remaining buffer, the size is less than a sector, call disk_write()
again to write them in one sector.

But if the total buffer size is less then one sector, the original code
will call disk_write() with zero sector number. It is unnecessary.
So this patch fix this. Now it will not call disk_write() if total buffer size
is less than one sector.
Signed-off-by: NJosh Wu <josh.wu@atmel.com>

gcc allows extensions to be non compiler specific by defining
__* macros for the attributes supported by gcc. Having a
different definition causes many warnings during the build
(cdefs.h on FreeBSD uses __attribute((__pure__)) where u-boot
uses __attribute__((pure)) for example). Do not redefine
these macros to suppress these warnings.

This patch ignores the checkpatch warning:
WARNING: __packed is preferred over __attribute__((packed))
Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>

Update git-mailrc with my nick and replace afleming as mmc custodian.
Signed-off-by: NPantelis Antoniou <panto@antoniou-consulting.com>

Somewhere along the line of refactoring the am335x header files, the
kernel image load was lost, so put it back in.
Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>

The commit 1a459660
  Add GPL-2.0+ SPDX-License-Identifier to source files

generated a warning due to a missing comment terminator.
  longlong.h:7:1: warning: "/*" within comment
Signed-off-by: NThomas Chou <thomas@wytron.com.tw>

While nothing presently examines the destination size, it should at
least be correct so that future users of sys_mapmem() will not be
surprised. Without this, it might be possible to overflow memory.
Signed-off-by: NKees Cook <keescook@chromium.org>
Acked-by: NSimon Glass <sjg@chromium.org>

This checks the size of the output buffer and fails if it was going to
overflow the buffer during lzo decompression.
Signed-off-by: NKees Cook <keescook@chromium.org>
Acked-by: NSimon Glass <sjg@chromium.org>

The output buffer size must be correctly passed to the lzma decoder or
there is a risk of overflowing memory during decompression. Switching
to the LZMA_FINISH_END mode means nothing is left in an unknown state
once the buffer becomes full.
Signed-off-by: NKees Cook <keescook@chromium.org>
Acked-by: NSimon Glass <sjg@chromium.org>

The output buffer size must not be reset by the gzip decoder or there
is a risk of overflowing memory during decompression.
Signed-off-by: NKees Cook <keescook@chromium.org>
Acked-by: NSimon Glass <sjg@chromium.org>

This adds the missing compression config items to the README.
Signed-off-by: NKees Cook <keescook@chromium.org>
Acked-by: NSimon Glass <sjg@chromium.org>

This adds the "test_compression" command when building the sandbox. This
tests the existing compression and decompression routines for simple
sanity and for buffer overflow conditions.
Signed-off-by: NKees Cook <keescook@chromium.org>
Acked-by: NSimon Glass <sjg@chromium.org>

Correct the following warnings found with sandbox when compression
is enabled.

cmd_bootm.c: In function 'bootm_load_os':
cmd_bootm.c:443:11: warning: passing argument 4 of 'lzop_decompress' from incompatible pointer type [enabled by default]
/usr/local/google/c/cosarm/src/third_party/u-boot/files/include/linux/lzo.h:31:5: note: expected 'size_t *' but argument is of type 'uint *'
cmd_ximg.c: In function 'do_imgextract':
cmd_ximg.c:225:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
cmd_ximg.c:225:14: warning: 'hdr' may be used uninitialized in this function [-Wuninitialized]
Signed-off-by: NSimon Glass <sjg@chromium.org>
Acked-by: NKees Cook <keescook@chromium.org>

Signed-off-by: NTom Rini <trini@ti.com>

With the new include structure for TI platforms, we need to not define
our own CONFIG_SYS_PROMPT and also need to include
<configs/omap5_common.h> much sooner, so do both of these.  Also drop
the unused CONFIG_NET_MULTI
Signed-off-by: NTom Rini <trini@ti.com>

i2c dev command does not work anymore for legacy drivers
because a check is executed that is valid only
in the new framework.
Signed-off-by: NHeiko Schocher <hs@denx.de>
Tested-by: NStefano Babic <sbabic@denx.de>

TFTP booting is slow when a USB keyboard is installed and
stdin has usbkbd added.
This fix is to change Ctrl-C polling for USB keyboard to every second
when NET transfer is running.
My previous patch is expected to be put into usb_kbd_testc(). But it went
into usb_kbd_getc() after applied.
This patch is to put change in correct place.
Signed-off-by: NJim Lin <jilin@nvidia.com>

TFTP booting is slow when a USB keyboard is installed and
stdin has usbkbd added.
This fix is to change Ctrl-C polling for USB keyboard to every second
when NET transfer is running.
Signed-off-by: NJim Lin <jilin@nvidia.com>

This flag is to make console aware that NET transfer is running or not.
Signed-off-by: NJim Lin <jilin@nvidia.com>

The 'enable' argument can be better expressed as boolean.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: NOtavio Salvador <otavio@ossystems.com.br>

Currently we have the following behavior in ehci_hcd_init()

- Read csmr1 register, clear bit 26 and then set bit 26.

However a little bit later we call set_usb_phy_clk() which clears bit 26, so
let's get rid of the unnecessary code.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>

The manufacturer and product IDs are dynamically assigned when gadget is
bind.
Now the IDs aren't assigned at struct g_dnl_string_defs definition.
Signed-off-by: NLukasz Majewski <l.majewski@samsung.com>
Cc: Marek Vasut <marex@denx.de>
Cc: "Egli, Samuel" <samuel.egli@siemens.com>

USB composite gadget (g_dnl) supports only one configuration. Due to that
the corresponding field - bConfigurationValue has been changed.

Moreover more descriptive names were chosen for relevant fields.

Windows XP setup:
- Thesyscon USB Descriptor Dumper
- zadig_xp program for WinUSB installation (which is required by dfu-util)
- dfu-util for windows (version 0.6)
- TRATS target connected via USB hub to test Win XP machine.

Tested at: Trats - Exynos4210
Signed-off-by: NLukasz Majewski <l.majewski@samsung.com>
Cc: Marek Vasut <marex@denx.de>
Cc: "Egli, Samuel" <samuel.egli@siemens.com>

updating an ubi partition needs a completely erased mtd partition,
see:
http://lists.infradead.org/pipermail/linux-mtd/2011-May/035416.html

So, add partubi alt setting for the dfu_alt_info environment
variable to mark this partition as an ubi partition. In case we
update an ubi partition, we erase after flashing the image into the
partition, the remaining sektors.
Signed-off-by: NHeiko Schocher <hs@denx.de>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
Cc: Tom Rini <trini@ti.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Scott Wood <scottwood@freescale.com>

The existing USB configuration parsing code relies on the descriptors'
own length values when reading through the configuration blob. Since the
size of those descriptors is always well-defined, we should rather use
the known sizes instead of trusting device-provided values to be
correct. Also adds some safety to potential out-of-order descriptors.

Change-Id: I16f69dfdd6793aa0fe930b5148d4521f3e5c3090
Signed-off-by: NJulius Werner <jwerner@chromium.org>

Add the call back to reset the LAN9730 after
the FEAT_POWER has been called.
Signed-off-by: NDan Murphy <dmurphy@ti.com>

Add a __weak function that can be overridden to reset devices
attached to an ehci devices after the FEAT_POWER has been submitted
Signed-off-by: NDan Murphy <dmurphy@ti.com>

Set the usbethaddr based on the OMAP DIE_ID registers
which should be unique for each processor.

Then set this as the usb ethernet MAC address.
Signed-off-by: NDan Murphy <dmurphy@ti.com>

Add the USB ehci support for the OMAP5 uEVM.

Configure the uEVM mux data
Add the flags to build the appropriate modules
Add the usb call backs to initialize the EHCI controller
Signed-off-by: NDan Murphy <dmurphy@ti.com>

Fix the linker error for missing ulpi_reset when ulpi is not defined
in the board config.
Signed-off-by: NDan Murphy <dmurphy@ti.com>
Acked-by: NMarek Vasut <marex@denx.de>

* Enable the OMAP5 EHCI host clocks
* Add OMAP5 EHCI register definitions
* Add OMAP5 ES2 host revision
Signed-off-by: NDan Murphy <dmurphy@ti.com>

Change the board name for the sys info to
5432 uEVM
Signed-off-by: NDan Murphy <dmurphy@ti.com>
Acked-by: NMarek Vasut <marex@denx.de>

Without this patch, when the currently chosen environment to be written
has bad blocks, saveenv fails completely. Instead, when there is
redundant environment fall back to the other copy. Environment reading
needs no adjustment, as the fallback logic for incomplete writes applies
to this case as well.
Signed-off-by: NPhil Sutter <phil.sutter@viprinet.com>

Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>

When executing nand scrub, the user gets the prompt:

  Really scrub this NAND flash? <y/N>

We do not want the annoying usage displayed when saying N here.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>